Date: Mon, 13 Nov 2000 23:43:50 -0500 (EST) From: Adam <bsdx@looksharp.net> To: Thierry.Herbelot@alcatel.fr Cc: freebsd-stable@FreeBSD.ORG Subject: Re: lnc and pcn drivers for an ancient HP PC Message-ID: <Pine.BSF.4.21.0011132342270.5772-100000@turtle.looksharp.net> In-Reply-To: <C1256996.005C8FDE.00@frmta003.netfr.alcatel.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
Can you see if there is an OS selection, or PNP OS setting in the BIOS? If so, set it for something older than win95 or "other", or PNP OS = NO. On Mon, 13 Nov 2000 Thierry.Herbelot@alcatel.fr wrote: > > >Hello, > >I had some troubles using the embedded "AMD PCNet/PCI" NIC of an ancient HP PC >(these troubles were partially corrected when using an updated BIOS) > >The chip is probed correctly with the (now-obsolete) lnc driver : > >lnc0: <PCNet/PCI Ethernet adapter> port 0xf8e0-0xf8ff mem 0xfedff400-0xfedff41f >irq 10 at device 8.0 on pci0 >lnc0: PCnet-PCI II address 08:00:09:bb:26:3a >lnc0: driver is using old-style compatability shims >(this is for a kernel with lnc and without pcn) > >burt it is not seen with the new pcn : >pcn0: couldn't map ports/memory >pci0: <unknown card> (vendor=0x1022, dev=0x2000) at 8.0 >(tis is for a kernel with pcn and without lnc) > >if this is only due to a incorrect indentification, here is the result of pciconf -l : > >chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x122d8086 rev=0x02 hdr=0x00 >xl0@pci0:6:0: class=0x020000 card=0x905510b7 chip=0x905510b7 rev=0x30 hdr=0x00 >xl1@pci0:7:0: class=0x020000 card=0x900410b7 chip=0x900410b7 rev=0x04 hdr=0x00 >lnc0@pci0:8:0: class=0x020000 card=0x00000000 chip=0x20001022 rev=0x16 hdr=0x00 >none0@pci0:13:0: class=0x030000 card=0x00000000 chip=0x88115333 rev=0x00 >hdr=0x00 >isab0@pci0:15:0: class=0x060100 card=0x00000000 chip=0x122e8086 rev=0x02 >hdr=0x00 >atapci0@pci0:15:1: class=0x010180 card=0x00000000 chip=0x12308086 rev=0x02 >hdr=0x00 > >All of this is with 4.2-RC1, hot from the CD-ROM. > > Thanks in advance if the chip can be used with pcn > > TfH > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0011132342270.5772-100000>