Date: Thu, 22 Jun 2000 17:46:19 +0200 From: Thierry.Herbelot@alcatel.fr To: stable@freebsd.org Subject: installing 4.0 on a "wd" machine [repost, with 3.4 dmesg] Message-ID: <C1256906.0056A3AA.00@frmta003.netfr.alcatel.fr>
next in thread | raw e-mail | index | archive | help
Hello,
I'm trying to install 4.0 on an ancient machine.
this machine is a VLB 486 PC, with a caching Tekram DC680C IDE controller.
The controller probes fine with "wd" driver, both in 3.4 and 4.0 with a kernel
recompiled with wdc and wd instaed of the new ata driver (see 3.4 dmesg further)
I have recompiled a new 4.0 kernel on a working 4.0 PC. This kernel has a
driver for wdc, wdc and mcd, used for the CD-ROM.
The boot floppy boots fine on both a "known working" 4.0 PC and the VLB PC.
The problem is that /stand/sysinstall does not find the wd drives (it complains :
"no disks found! Please verify that your disk controller is being probed at boot
time ..." in the second window after selecting a Novice install)
How may I install 4.0 on this PC ? (upgrading from 3.4 to 4.0 with the sources is
not really an option as the disks are a bit small)
TIA
TfH
PS : there is a suspicious "wd0: interrupt timeout (status 5a<rdy,seekdone,drq,index>
error 0)" at the end of the dmesg (maybe the IDE controller is not so well supported ....)
3.4 dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.4-RELEASE #0: Tue Dec 28 22:18:05 GMT 1999
jkh@highwing.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: i486DX (486-class CPU)
real memory = 16777216 (16384K bytes)
config> di zp0
config> di ze0
config> di lnc0
config> di ie0
config> di fe0
config> di ex0
config> di ep0
config> di ed0
config> di cs0
config> di wt0
config> di scd0
config> di matcdc0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> en le0
config> po le0 0x280
config> ir le0 5
config> iom le0 0xd0000
config> f le0 0
config> en mcd0
config> po mcd0 0x300
config> ir mcd0 10
config> f mcd0 0
config> q
avail memory = 13156352 (12848K bytes)
Preloaded elf kernel "kernel" at 0xc035c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035c09c.
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): < TEKRAM DC-6X0X IDE cacheing controller>
wd0: 329MB (675450 sectors), 790 cyls, 15 heads, 57 S/T, 512 B/S
wdc0: unit 1 (wd1): < TEKRAM DC-6X0X IDE cacheing controller>
wd1: 327MB (670320 sectors), 665 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
mcd0: type Mitsumi FX001D, version info: D 2
mcd0 at 0x300-0x303 irq 10 on isa
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
le0: lemac configuration error: expected IRQ 0x20 actual 0x400
le0 not found at 0x280
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s2a
wd0: interrupt timeout (status 5a<rdy,seekdone,drq,index> error 0)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C1256906.0056A3AA.00>