Date: Fri, 23 Sep 2005 16:40:52 +0200 From: Didier Wiroth <didier.wiroth@mcesr.etat.lu> To: freebsd-hardware@freebsd.org Subject: freebsd 5.4 & proliant dl360 g3 (SMP) second cpu not detected Message-ID: <0IN9006YHY34M730@store.etat.lu>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --Boundary_(ID_m3soqyE9t5DLUbwnjyFWdw) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Hi, I've installed freebsd5.4 on a compaq proliant dl360 g3 (dual cpu 2.8mhz). I have recompiled a SMP kernel. But after the reboot with the new kernel the second cpu is not detected by freebsd: archive# sysctl hw.ncpu hw.ncpu: 1 The proliant bios setting, "system options" - "OS Selection" is set to "Other OS". I've attached the output of mptables. thx for helping didier --Boundary_(ID_m3soqyE9t5DLUbwnjyFWdw) Content-type: text/plain; name=mptable-output.txt Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=mptable-output.txt =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f4fd0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x00 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f28bd signature: 'PCMP' base table length: 404 version: 1.4 checksum: 0x27 OEM ID: 'COMPAQ ' Product ID: 'PROLIANT ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 42 local APIC address: 0xfee00000 extended table length: 172 extended table checksum: 120 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x14 BSP, usable 6 2 1 0x0381 6 0x14 AP, usable 15 2 9 0xbfebfbff -- Bus: Bus ID Type 0 PCI 128 PCI 144 PCI 16 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 3 0x11 usable 0xfec01000 4 0x11 usable 0xfec02000 5 0x11 usable 0xfec03000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# INT active-lo level 128 1:A 3 12 INT active-lo level 128 1:B 3 11 INT active-lo level 128 1:C 3 12 INT active-lo level 128 1:D 3 11 INT active-lo level 144 1:A 3 10 INT active-lo level 144 1:B 3 9 INT active-lo level 144 1:C 3 10 INT active-lo level 144 1:D 3 9 INT active-lo level 0 4:A 3 15 INT active-lo level 128 2:A 3 14 INT active-lo level 144 2:A 3 13 INT active-lo level 0 5:A 3 7 INT active-lo level 0 5:B 3 6 INT active-lo level 0 15:A 2 255 INT active-hi edge 16 1 2 1 INT active-hi edge 16 0 2 2 INT active-hi edge 16 3 2 3 INT active-hi edge 16 4 2 4 INT active-hi edge 16 5 2 5 INT active-hi edge 16 6 2 6 INT active-hi edge 16 7 2 7 INT active-hi edge 16 8 2 8 INT active-hi edge 16 9 2 9 INT active-hi edge 16 10 2 10 INT active-hi edge 16 11 2 11 INT active-hi edge 16 12 2 12 INT active-hi edge 16 13 2 13 INT active-hi edge 16 14 2 14 INT active-hi edge 16 15 2 15 ExtINT active-hi edge 16 0 2 0 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 16 0 255 0 NMI active-hi edge 16 0 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x2d00 -- System Address Space bus ID: 0 address type: memory address address base: 0xf2d00000 address range: 0x1300000 -- System Address Space bus ID: 128 address type: I/O address address base: 0x0 address range: 0x0 -- System Address Space bus ID: 128 address type: memory address address base: 0xf4000000 address range: 0x3f00000 -- System Address Space bus ID: 144 address type: I/O address address base: 0x0 address range: 0x0 -- System Address Space bus ID: 144 address type: memory address address base: 0xf7f00000 address range: 0x100000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x60000 -- Bus Heirarchy bus ID: 16 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 128 address modifier: subtract predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 144 address modifier: subtract predefined range: 0x00000000 =============================================================================== --Boundary_(ID_m3soqyE9t5DLUbwnjyFWdw)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0IN9006YHY34M730>