Date: Thu, 15 May 2003 16:14:52 -0400 From: "SCHNEIDER Anthony" <Anthony.SCHNEIDER@murex.com> To: "Mikhail Teterin" <mi+mx@aldan.algebra.com>, <scsi@FreeBSD.org> Cc: ken@FreeBSD.org Subject: RE: troubles with an Exhabyte tape drive Message-ID: <7691488D1955AC4AB0667FCFEED4499154C84E@mercury.us.murex.com>
next in thread | raw e-mail | index | archive | help
Also of use might be: 4.6-RELEASE FreeBSD 4.6-RELEASE #8: Tue Sep 3 11:56:05 GMT 2002 GENERIC i386 Thanks! -Anthony. > -----Original Message----- > From: Mikhail Teterin [mailto:mi+mx@aldan.algebra.com] > Sent: Thursday, May 15, 2003 4:07 PM > To: scsi@FreeBSD.org > Cc: ken@FreeBSD.org; gibbs@FreeBSD.org; SCHNEIDER Anthony > Subject: troubles with an Exhabyte tape drive >=20 > Hello! >=20 > We can read the tapes using this drive: >=20 > sym0: <875> port 0x2400-0x24ff mem 0x42000000-0x42000fff,0x42100000- > 0x421000ff > irq 11 at device 16.0 on pci0 > sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking > sym0: open drain IRQ line driver, using on-chip SRAM > sym0: using LOAD/STORE-based firmware. > sa0 at sym0 bus 0 target 0 lun 0 > sa0: <EXABYTE EXB-89008E030203 V41e> Removable Sequential Access SCSI-2 > device > sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit) >=20 >=20 > but we can not write anything :-( The kernel's messages logged are: >=20 > (sa0:sym0:0:0:0): WRITE(06). CDB: a 0 0 28 0 0 > (sa0:sym0:0:0:0): ILLEGAL REQUEST asc:30,5 > (sa0:sym0:0:0:0): Cannot write medium - incompatible format >=20 > Is it our clumsiness, or the tapes (we tried about a dozen), or the > drive? Thanks a lot! >=20 > -mi >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7691488D1955AC4AB0667FCFEED4499154C84E>