Date: Sun, 26 Sep 2010 20:52:54 +0300 From: Andriy Gapon <avg@icyb.net.ua> To: David DEMELIER <demelier.david@gmail.com> Cc: freebsd-stable <freebsd-stable@freebsd.org>, Jeremy Chadwick <freebsd@jdc.parodius.com> Subject: Re: Failure to burn with ahci mode. Message-ID: <4C9F8876.1040007@icyb.net.ua> In-Reply-To: <AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy@mail.gmail.com> References: <AANLkTimH41m7Vckd3bCq%2BuwX_79sY7dP%2B0ZbwpnrJAkc@mail.gmail.com> <4C9F16F9.50707@icyb.net.ua> <AANLkTimAXa=1bas_GgvzRbPwzuSUn-VQHX9jWm0mRo50@mail.gmail.com> <20100926103836.GA33415@owl.midgard.homeip.net> <AANLkTimqTJbbc_45yLvGz93jPRm1k4YNkzzxvw%2BsE6n0@mail.gmail.com> <20100926172527.GA38405@icarus.home.lan> <AANLkTikcMOrOctSrsUPYH%2BMc562-putxO8s94xgtVHpy@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
on 26/09/2010 20:37 David DEMELIER said the following: > markand@Melon ~ $ sudo camcontrol devlist > <WDC WD3200BEKT-60F3T1 12.01A12> at scbus0 target 0 lun 0 (ada0) > <hp DVDRAM GT20L DC05> at scbus1 target 0 lun 0 (cd0) > > markand@Melon ~ $ sudo cdrecord downloads/FreeBSD-8.1-RELEASE-amd64-livefs.iso > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive > dependent defaults. > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright > (C) 1995-2010 Jörg Schilling > cdrecord: Error 0. Cannot open or use SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=help'. > > markand@Melon ~ $ sudo cdrecord -scanbus > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright > (C) 1995-2010 Jörg Schilling > cdrecord: Error 0. Cannot open or use SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=help'. Doesn't look like you have xpt and pass devices in your kernel, which are (almost) mandatory when use CAM-based drivers. Not sure if ahci(4) mentions this. -- Andriy Gapon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4C9F8876.1040007>