Date: Thu, 31 Jul 2014 19:48:56 +0300 From: Vladislav Prodan <universite@ukr.net> To: Paul Blockhaus <paul@mueller-blockhaus.de> Cc: freebsd-questions@freebsd.org Subject: Re: vlan address-aliassing not working Message-ID: <1406825080.567617631.8yxkvawh@frv35.fwdcdn.com> In-Reply-To: <20140731123414.388112e1@paul-pc.mbnet.de> References: <20140731123414.388112e1@paul-pc.mbnet.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--- Original message --- From: "Paul Blockhaus" <paul@mueller-blockhaus.de> Date: 31 July 2014, 13:35:18 > Hello Guys, > > recently I set up ezjail on my UTM and made aliasses for my vlan, so > far no problems, but after reboot the aliases for the vlans hasn't been > recreated, only for the physical non-vlan NICs. > Any Ideas why the aliases weren't created, is it my mistake? > > Greetings Paul > > my /etc/rc.conf: ... > ifconfig_em0="inet 192.168.1.1 netmask 255.255.255.0" > vlans_em0="50 150" > ifconfig_em0_50="inet 192.168.2.1 netmask 255.255.255.0" > ifconfig_em0_150="inet 192.168.6.1 netmask 255.255.255.0" ... > ifconfig_em0_alias0="inet 192.168.1.2 netmask 255.255.255.0" > ifconfig_em0.50_alias0="inet 192.168.2.3 netmask 255.255.255.0" > ifconfig_em0_150_alias0="inet 192.168.6.2 netmask 255.255.255.0" Use the following settings: cloned_interfaces="vlan50 vlan150" ifconfig_vlan50="inet 192.168.2.1/24 vlan 50 vlandev em0 mtu 1500 up" ifconfig_vlan150="inet 192.168.6.1/24 vlan 150 vlandev em0 mtu 1500 up" ifconfig_em0_alias0="inet 192.168.1.2/24" ifconfig_vlan50_alias0="inet 192.168.2.3/24" ifconfig_vlan150_alias0="inet 192.168.6.2/24" -- Vladislav V. Prodan System & Network Administrator support.od.ua
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1406825080.567617631.8yxkvawh>