Date: Fri, 13 Oct 2006 16:37:50 +0930 From: Adrian Murphy <amurphy@gsoft.com.au> To: Ian FREISLICH <if@hetzner.co.za>, current@freebsd.org Subject: Re: cardbus/xircom realport no longer works Message-ID: <452F3B46.3010203@gsoft.com.au> In-Reply-To: <E1GYGoJ-000PWp-NK@hetzner.co.za> References: <E1GYGoJ-000PWp-NK@hetzner.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Ian FREISLICH wrote: > Daniel Eischen wrote: >> M. Warner Losh wrote: >>> In message: <E1GXdro-000Izw-QQ@hetzner.co.za> >>> Ian FREISLICH <if@hetzner.co.za> writes: >>> : Hi >>> : >>> : After upgrading from 6.2-prerelease to current on one of my friend's >>> : laptops, the cardbus ethernet adaptor doesn't work any more. >>> : The card is one of those 2 slot thick Xircom RealPorts ethernet >>> : with a modem (red plastic connectors in the card). >>> : >>> : I can supply more information if required. (At least it works with >>> : my old 10M Accton pccard). >>> : >>> : FreeBSD 6.2-PRERELEASE #0: Mon Oct 9 08:36:57 UTC 2006 >>> : >>> : cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0 >>> : cardbus0: <CardBus bus> on cbb0 >>> : pccard0: <16-bit PCCard bus> on cbb0 >>> : cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0 >>> : cardbus1: <CardBus bus> on cbb1 >>> : pccard1: <16-bit PCCard bus> on cbb1 >>> : >>> : dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x88000000-0x8800 > 07ff, 0x88001000-0x880017ff irq 11 at device 0.0 on cardbus0 >>> : miibus0: <MII bus> on dc0 >> : tdkphy0: <TDK 78Q2120 media interface> on miibus0 >>> : tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> : dc0: Ethernet address: 00:10:a4:98:ff:b6 >>> : sio4: <Xircom Cardbus modem> port 0x1080-0x1087 mem 0x88002000-0x880027ff > ,0x88003000-0x880037ff at device 0.1 on cardbus0 >>> : sio4: type 16550A >>> : sio4: unable to activate interrupt in fast mode - using normal mode >>> : >>> : >>> : FreeBSD 7.0-CURRENT #1: Tue Oct 10 10:42:40 UTC 2006 >>> : >>> : cbb0: <TI1225 PCI-CardBus Bridge> at device 3.0 on pci0 >>> : cardbus0: <CardBus bus> on cbb0 >>> : pccard0: <16-bit PCCard bus> on cbb0 >>> : cbb1: <TI1225 PCI-CardBus Bridge> at device 3.1 on pci0 >>> : cardbus1: <CardBus bus> on cbb1 >>> : pccard1: <16-bit PCCard bus> on cbb1 >>> : >>> : cardbus0: CIS pointer is 0x107 >>> : cardbus0: CIS in option rom >>> : cardbus0: Unable to allocate resource to read CIS. >>> : cardbus0: Unable to allocate resources for CIS >>> : cardbus0: Warning: Bogus CIS ignored >>> : dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 0x88000000-0x8800 > 07ff, 0x88001000-0x880017ff at device 0.0 on cardbus0 >>> : dc0: No station address in CIS! >>> : device_attach: dc0 attach returned 6 >>> : cardbus0: CIS pointer is 0x207 >>> : cardbus0: CIS in option rom >>> : cardbus0: Unable to allocate resource to read CIS. >>> : cardbus0: Unable to allocate resources for CIS >>> : cardbus0: Warning: Bogus CIS ignored >>> : sio4: <Xircom Cardbus modem> port 0x1000-0x1007 mem 0x88002000-0x880027ff > ,0x88003000-0x880037ff at device 0.1 on cardbus0 >>> : sio4: type 16550A >>> : sio4: [GIANT-LOCKED] >>> : sio4: unable to activate interrupt in fast mode - using normal mode >>> >>> This is defintiely weird.... I'll see if I can recreate it... >> I have the same problem on -current with my dc (Xircom) card and >> a Dell Inspiron laptop. It used to work (under -current) but >> hasn't worked in months. I also have a Dell Inspiron and I have trouble with cardbus in current since Jan 2006. > Do you have an approximate date at which it stopped working? My > laptoy is dog slow, but I'm prepared to do a binary search if you > can give me a start time. If I wind the version of the Cardbus module back to a date < December 29, 2005 the problem goes away. Otherwise, I get the problem you describe. I use Cardbus for a wireless card. Adrian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?452F3B46.3010203>