Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 22 Sep 2002 07:28:25 -0700
From:      "David P. Reese Jr." <daver@gomerbud.com>
To:        current@freebsd.org
Subject:   Cant see ACPI thermal zones on a Supermicro P6DBU
Message-ID:  <20020922142825.GA634@tombstone.gomerbud.com>

next in thread | raw e-mail | index | archive | help
Does anyone know a reason why i should not see any info about the thermal
zones on a Supermicro P6DBU in sysctl?  I'm not even seeing the acpi_tz's
in dmesg.  As far as i know, the board does have thermal sensors.  I can
check the cpu temperatures in bios.  If it would help, i could also provide
the output of acpidump.

dmesg:
FreeBSD 5.0-CURRENT-20020917-JPSNAP #0: Sat Sep 21 22:08:13 PDT 2002
    root@metropolis.gomerbud.com:/usr/obj/usr/src/sys/METROPOLIS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a3000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04a30a8.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201195520 (196480K bytes)
avail memory = 190021632 (185568K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 11
IOAPIC #0 intpin 18 -> irq 5
IOAPIC #0 intpin 19 -> irq 10
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040011, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00040011, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SUPERM SUPERTBL> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib1
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib2: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX"  frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ahc_pci0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 11 at device 14.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebfef80-0xfebfefff irq 5 at device 18.0 on pci0
xl0: Ethernet address: 00:50:da:05:a6:62
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xc8800-0xc8fff,0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 9787MB <QUANTUM FIREBALL EX10.2A> [19885/16/63] at ata0-master UDMA33
acd0: CDROM <ATAPI 40X CDROM> at ata1-master PIO4
Waiting 2 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!

-- 

   David P. Reese Jr.                                      daver@gomerbud.com
   --------------------------------------------------------------------------
   C 
      You shoot yourself in the foot. 
   Assembler
      You try to shoot yourself in the foot, only to discover you must first
      invent the gun, the bullet, the trigger, and your foot. 

                                            How to Shoot Yourself in the Foot
                                        <http://www.m5p.com/~pravn/foot.html>;

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020922142825.GA634>