Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Sep 2002 13:21:02 +0200 (CEST)
From:      Gheorghe Ardelean <ardelean@ww.uni-erlangen.de>
To:        <freebsd-questions@freebsd.org>
Cc:        <freebsd-hackers@freebsd.org>
Subject:   Problems with PC Card card in -current!
Message-ID:  <Pine.LNX.4.33.0209091318480.23034-100000@servww6.ww.uni-erlangen.de>

next in thread | raw e-mail | index | archive | help

Hi,

I am having problems getting Avaya Wireless Wi/Fi ETS Card 11 Mb/s GOLD
working under FreeBSD 5.0-CURRENT-20020818-JPSNAP on a IBM Thinkpad
Laptop.

Do I miss some special settings?

When I am inserting the card in the slot I get the following message:

pccard1: Card has no functions!
cbb1: PC Card card activation failed

and the output pccardc dumpcis is

	0 slots found

any help would be very much appreciated.

Regards,

G. Ardelean

P.S. Here is the corresponding dmesg:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT-20020818-JPSNAP #4: Wed Sep  4 16:00:28 GMT 2002
    root@:/usr/src/sys/i386/compile/THINKPAD
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0517000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05170a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 498272880 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.27-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134021120 (130880K bytes)
avail memory = 124514304 (121596K bytes)
Pentium Pro MTRR support enabled
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP600X  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
    ACPI-0351: *** Error: Could not install PciConfig handler for PCI0,
AE_ALREADY_EXISTS
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz1: <thermal zone> on acpi0
acpi_tz2: <thermal zone> on acpi0
acpi_tz3: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0x40000000-0x43ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at
device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at
device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem
0x50000000-0x500fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0
csa: card is Thinkpad 600X/A20/T20
pcm0: <CS461x PCM Audio> on csa0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
pccard1: Card has no functions!
cbb1: PC Card card activation failed
ad0: 11509MB <IBM-DARA-212000> [24944/15/63] at ata0-master UDMA33
acd0: DVD-ROM <MATSHITADVD-ROM SR-8174> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0209091318480.23034-100000>