Date: Wed, 29 May 2002 17:18:46 -0400 (EDT) From: Igor Roshchin <str@giganda.komkon.org> To: stable@freebsd.org Subject: SCB problem Message-ID: <200205292118.g4TLIkx38808@giganda.komkon.org>
next in thread | raw e-mail | index | archive | help
Hello! I tried to ask this on the -questions mailing list, but received no response. I hope somebody here can help. I was trying but was not able to find the information of what this SCB- related error message mean exactly, i.e. what happened with the system, and whether that's an indication of the hardware problem. I keep the system-related information from the boot-up time below. The system board is Intel-2150 server board with the hot-swappable HDDs, two HDDs and a tape drive Any insights are appreciated. (Please Cc: me, since I am not on the list) Thanks, Igor Relevan boot-up information. May 15 23:00:49 <kern.crit myhost /kernel: FreeBSD 4.4-RELEASE #0: Sun Nov 4 20:05:40 EST 2001 May 15 23:00:49 <kern.crit myhost /kernel: Timecounter "i8254" frequency 1193182 Hz May 15 23:00:49 <kern.crit myhost /kernel: CPU: Pentium III/Pentium III Xeon/Celeron (448.05-MHz 686-class CPU) May 15 23:00:49 <kern.crit myhost /kernel: Origin = "GenuineIntel" Id = 0x673 Stepping = 3 May 15 23:00:49 <kern.crit myhost /kernel: Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> <.. May 15 23:00:49 <kern.crit myhost /kernel: ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 11 at device 12.0 on pci0 May 15 23:00:49 <kern.crit myhost /kernel: aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs May 15 23:00:49 <kern.crit myhost /kernel: ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 11 at device 12.1 on pci0 May 15 23:00:49 <kern.crit myhost /kernel: aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/255 SCBs <.. May 15 23:00:49 <kern.crit myhost /kernel: pass2 at ahc1 bus 0 target 6 lun 0 May 15 23:00:49 <kern.crit myhost /kernel: pass2: <ESG-SHV SCA HSBP M10 0.04> Fixed Processor SCSI-2 device May 15 23:00:49 <kern.crit myhost /kernel: pass2: 3.300MB/s transfers May 15 23:00:49 <kern.crit myhost /kernel: da0 at ahc1 bus 0 target 2 lun 0 May 15 23:00:49 <kern.crit myhost /kernel: da0: <SEAGATE ST318203LC 0003> Fixed Direct Access SCSI-2 device May 15 23:00:49 <kern.crit myhost /kernel: da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled May 15 23:00:49 <kern.crit myhost /kernel: da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) May 15 23:00:49 <kern.crit myhost /kernel: da1 at ahc1 bus 0 target 3 lun 0 May 15 23:00:49 <kern.crit myhost /kernel: da1: <SEAGATE ST318203LC 0003> Fixed Direct Access SCSI-2 device May 15 23:00:49 <kern.crit myhost /kernel: da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled May 15 23:00:49 <kern.crit myhost /kernel: da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) <.. Error logs: May 16 08:25:09 <kern.crit myhost /kernel: ahc1: WARNING no command for scb 239 (cmdcmplt) May 16 08:26:24 <kern.crit myhost /kernel: QOUTPOS = 64 May 16 08:26:24 <kern.crit myhost /kernel: (da0:ahc1:0:2:0): SCB 0x31 - timed out May 16 08:26:25 <kern.crit myhost /kernel: ahc1: Dumping Card State while idle, at SEQADDR 0x9 May 16 08:26:25 <kern.crit myhost /kernel: ACCUM = 0x0, SINDEX = 0x16, DINDEX = 0xe4, ARG_2 = 0x0 May 16 08:26:25 <kern.crit myhost /kernel: HCNT = 0x0 May 16 08:26:25 <kern.crit myhost /kernel: SCSISEQ = 0x12, SBLKCTL = 0x6 May 16 08:26:25 <kern.crit myhost /kernel: DFCNTRL = 0x0, DFSTATUS = 0x89 May 16 08:26:25 <kern.crit myhost /kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80 May 16 08:26:25 <kern.crit myhost /kernel: SSTAT0 = 0x0, SSTAT1 = 0xa May 16 08:26:25 <kern.crit myhost /kernel: STACK == 0x3, 0x107, 0x15f, 0x0 May 16 08:26:25 <kern.crit myhost /kernel: SCB count = 140 May 16 08:26:25 <kern.crit myhost /kernel: Kernel NEXTQSCB = 35 May 16 08:26:25 <kern.crit myhost /kernel: Card NEXTQSCB = 35 May 16 08:26:25 <kern.crit myhost /kernel: QINFIFO entries: May 16 08:26:25 <kern.crit myhost /kernel: Waiting Queue entries: May 16 08:26:25 <kern.crit myhost /kernel: Disconnected Queue entries: May 16 08:26:25 <kern.crit myhost /kernel: QOUTFIFO entries: May 16 08:26:25 <kern.crit myhost /kernel: Sequencer Free SCB List: 23 14 20 15 13 28 29 27 30 7 10 26 3 11 0 4 2 16 21 1 19 22 8 18 9 12 5 24 31 25 17 6 May 16 08:26:25 <kern.crit myhost /kernel: Pending list: 49 May 16 08:26:25 <kern.crit myhost /kernel: Kernel Free SCB list: 22 11 13 12 5 57 26 68 66 3 58 21 44 2 43 18 56 139 52 4 34 1 53 32 30 17 31 7 42 59 8 47 45 40 29 25 37 23 69 51 19 46 14 54 48 41 36 50 20 55 67 28 15 0 9 10 38 39 16 27 6 24 33 65 120 121 122 123 124 125 126 127 128 129 110 111 112 113 114 115 116 117 118 119 100 101 102 103 104 105 106 107 108 109 90 91 92 93 94 95 96 97 98 99 80 81 82 83 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78 79 60 61 62 63 64 138 137 136 135 134 133 132 131 130 May 16 08:26:25 <kern.crit myhost /kernel: sg[0] - Addr 0xd49b000 : Length 4096 May 16 08:26:25 <kern.crit myhost /kernel: sg[1] - Addr 0xd55c000 : Length 4096 May 16 08:26:25 <kern.crit myhost /kernel: (da0:ahc1:0:2:0): Queuing a BDR SCB May 16 08:26:25 <kern.crit myhost /kernel: (da0:ahc1:0:2:0): Bus Device Reset Message Sent May 16 08:26:25 <kern.crit myhost /kernel: (da0:ahc1:0:2:0): no longer in timeout, status = 34b May 16 08:26:25 <kern.crit myhost /kernel: ahc1: Bus Device Reset on A:2. 1 SCBs aborted To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200205292118.g4TLIkx38808>