Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 13 May 2007 03:40:39 GMT
From:      Sepherosa Ziehau <sephe@FreeBSD.org>
To:        Perforce Change Reviews <perforce@FreeBSD.org>
Subject:   PERFORCE change 119741 for review
Message-ID:  <200705130340.l4D3edtE026743@repoman.freebsd.org>

next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=119741

Change 119741 by sephe@sephe_zealot:sam_wifi on 2007/05/13 03:39:41

	u_intX_t -> uintX_t
	
	Approved by:	sam

Affected files ...

.. //depot/projects/wifi/sys/net80211/_ieee80211.h#20 edit

Differences ...

==== //depot/projects/wifi/sys/net80211/_ieee80211.h#20 (text+ko) ====

@@ -109,9 +109,9 @@
  * Channels are specified by frequency and attributes.
  */
 struct ieee80211_channel {
-	u_int32_t	ic_flags;	/* see below */
-	u_int16_t	ic_freq;	/* setting in Mhz */
-	u_int8_t	ic_ieee;	/* IEEE channel number */
+	uint32_t	ic_flags;	/* see below */
+	uint16_t	ic_freq;	/* setting in Mhz */
+	uint8_t		ic_ieee;	/* IEEE channel number */
 	int8_t		ic_maxregpower;	/* maximum regulatory tx power in dBm */
 	int8_t		ic_maxpower;	/* maximum tx power in .5 dBm */
 	int8_t		ic_minpower;	/* minimum tx power in .5 dBm */
@@ -248,8 +248,8 @@
 #define	IEEE80211_RATE_MAXSIZE	15		/* max rates we'll handle */
 
 struct ieee80211_rateset {
-	u_int8_t		rs_nrates;
-	u_int8_t		rs_rates[IEEE80211_RATE_MAXSIZE];
+	uint8_t			rs_nrates;
+	uint8_t			rs_rates[IEEE80211_RATE_MAXSIZE];
 };
 
 /*
@@ -261,8 +261,8 @@
 #define	IEEE80211_HTRATE_MAXSIZE 127
 
 struct ieee80211_htrateset {
-	u_int8_t		rs_nrates;
-	u_int8_t		rs_rates[IEEE80211_HTRATE_MAXSIZE];
+	uint8_t			rs_nrates;
+	uint8_t			rs_rates[IEEE80211_HTRATE_MAXSIZE];
 };
 
 /*
@@ -276,10 +276,10 @@
 	int8_t			rssi11a;	/* rssi thresh for 11a bss */
 	int8_t			rssi11b;	/* for 11g sta in 11b bss */
 	int8_t			rssi11bOnly;	/* for 11b sta */
-	u_int8_t		pad1;
-	u_int8_t		rate11a;	/* rate thresh for 11a bss */
-	u_int8_t		rate11b;	/* for 11g sta in 11b bss */
-	u_int8_t		rate11bOnly;	/* for 11b sta */
-	u_int8_t		pad2;
+	uint8_t			pad1;
+	uint8_t			rate11a;	/* rate thresh for 11a bss */
+	uint8_t			rate11b;	/* for 11g sta in 11b bss */
+	uint8_t			rate11bOnly;	/* for 11b sta */
+	uint8_t			pad2;
 };
 #endif /* _NET80211__IEEE80211_H_ */



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705130340.l4D3edtE026743>