Date: Tue, 26 Aug 2014 19:02:09 +0000 From: "RANDOLPH, DONALD L" <DR2370@att.com> To: Glen Barber <gjb@freebsd.org> Cc: "freebsd-stable@freebsd.org" <freebsd-stable@freebsd.org> Subject: RE: Dell PowerEdge R920 w/ Perc H730P Message-ID: <D9316D9083ABED49ADE78C3FA1348BCC163DDFE9@MOSTLS1MSGUSRFH.ITServices.sbc.com> In-Reply-To: <20140826184659.GB3131@hub.FreeBSD.org> References: <D9316D9083ABED49ADE78C3FA1348BCC163DDFA5@MOSTLS1MSGUSRFH.ITServices.sbc.com> <20140826184659.GB3131@hub.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
The install failed using the method below. While extracting the archives I=
get an mfi command failed... then a series of mfi0: COMMAND 0xfffffe0001fc=
f388 timeout after 76 seconds... and it keeps incrementing from there.
Should the drive still show up as mfid0 during install? I was expecting to=
see mrsasd0 or something of that sort.
Thanks
-----Original Message-----
From: Glen Barber [mailto:gjb@freebsd.org]=20
Sent: Tuesday, August 26, 2014 1:47 PM
To: RANDOLPH, DONALD L
Cc: freebsd-stable@freebsd.org
Subject: Re: Dell PowerEdge R920 w/ Perc H730P
On Tue, Aug 26, 2014 at 06:39:59PM +0000, RANDOLPH, DONALD L wrote:
> I'm having an issue install FreeBSD 10.0 on a Dell PowerEdge w/ the Perc =
H730P raid controller.
> I see there has been support added for the controller in the stable versi=
on using the mrsas driver.
> But when I boot up in the installer... it is still trying to use the olde=
r mfi driver.
> How do I get the installer to properly recognize the raid controller?
> Are there any logs I can provide to help solve this issue?
>=20
At the loader(8) prompt, try:
set hw.mfi.mrsas_enable=3D1
boot
There is an overlap between some mfi(4) drivers and the mrsas(4) driver,
and the mfi(4) probe happens first.
Glen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D9316D9083ABED49ADE78C3FA1348BCC163DDFE9>