Date: Fri, 13 Nov 2009 18:27:28 +0000 From: Oleg Zharkoy <zoleg@vusovich.ru> To: freebsd-hardware@freebsd.org Subject: amr driver issues in FreeBSD 7.2-amd64 and 8.0RC2-amd64: data coruption on RAID volume connected to Intel SRCS16 controller with more 2G RAM Message-ID: <C68C8D17-C912-4195-9D1B-EC5CE08771F6@vusovich.ru>
next in thread | raw e-mail | index | archive | help
The amr driver contains a bug which can lead to data corruption on x64 =
with >2GB RAM in case of high I/O load with the Intel SRCS16 RAID =
controller.
On system console and in /var/log/messages i see:
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D1410197177638684672, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-6789833140853884928, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-6340316514251257856, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-1604222101744628736, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D1512330144284542976, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D6938750517802503168, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D1355641023730907136, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D1410197177638684672, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-6789833140853884928, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-6340316514251257856, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-1604222101744628736, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D1512330144284542976, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D6938750517802503168, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D1355641023730907136, =
length=3D8192)]error =3D 5
Oct 31 19:01:54 ns kernel: =
g_vfs_done():amrd0s1d[READ(offset=3D-4443450940333174784, =
length=3D8192)]error =3D 5
With 2G RAM or on x86 version no data corruption and no error occured.
Kernel config:
cpu HAMMER
ident MK_MAIN
options SCHED_ULE
#options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread =
preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission =
Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates =
support
options UFS_ACL # Support for access control =
lists
options UFS_DIRHASH # Improve performance on big =
directories
options UFS_GJOURNAL # Enable gjournal-based UFS =
journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
#options NFS_ROOT # NFS usable as /, requires =
NFSCLIENT
#options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires =
PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP =
THIS!]
options COMPAT_IA32 # Compatible with i386 binaries
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options COMPAT_FREEBSD7 # Compatible with FreeBSD7
options SCSI_DELAY=3D5000 # Delay (in ms) before probing =
SCSI
#options KTRACE # ktrace(1) support
#options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time =
extensions
options PRINTF_BUFR_SIZE=3D128 # Prevent printf output being =
interspersed.
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
#options HWPMC_HOOKS # Necessary kernel hooks for =
hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options FLOWTABLE # per-cpu routing cache
# Enable 32-bit Linux ABI emulation (requires COMPAT_43 and COMPAT_IA32)
options COMPAT_LINUX32
# Enable the linux-like proc filesystem support (requires COMPAT_LINUX32
# and PSEUDOFS)
options LINPROCFS
#Enable the linux-like sys filesystem support (requires COMPAT_LINUX32
# and PSEUDOFS)
options LINSYSFS
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor =
Kernel
# CPU frequency control
#device cpufreq
# Bus support.
device acpi
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI =
access)
device ses # SCSI Environmental Services (and =
SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
#device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Serial (COM) ports
device uart # Generic UART driver
# PCI Ethernet NICs.
device em # Intel PRO/1000 adapter Gigabit =
Ethernet Card
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these =
NICs!
device miibus # MII bus support
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus =
and da
device ums # Mouse
# USB Ethernet, requires miibus
device cdce # Generic USB over Ethernet
#
# SMB bus
#
# System Management Bus support is provided by the 'smbus' device.
# Access to the SMBus device is via the 'smb' device (/dev/smb*),
# which is a child of the 'smbus' device.
#
# Supported devices:
# smb standard I/O through /dev/smb*
#
# Supported SMB interfaces:
# iicsmb I2C to SMB bridge with any iicbus interface
# bktr brooktree848 I2C hardware interface
# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, =
82801BA)
# viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
# amdpm AMD 756 Power Management Unit
# amdsmb AMD 8111 SMBus 2.0 Controller
# nfpm NVIDIA nForce Power Management Unit
# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
#
device smb
device smbus # Bus support, required for smb below.
device ipmi
device ichsmb
#
# I2C Bus
#
# Philips i2c bus support is provided by the `iicbus' device.
#
# Supported devices:
# ic i2c network interface
# iic i2c standard io
# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
#
# Supported interfaces:
# bktr brooktree848 I2C software interface
#
# Other:
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
#
device iicbus # Bus support, required for =
ic/iic/iicsmb below.
device iicbb
device ic
device iic
device iicsmb # smb over i2c bridge
#
# Temperature sensors:
#
# coretemp: on-die sensor on Intel Core and newer CPUs
# k8temp: on-die sensor on AMD K8 CPUs
#
device coretemp
# mchain library. It can be either loaded as KLD or compiled into kernel
options LIBMCHAIN
# libalias library, performing NAT
options LIBALIAS
#
# Internet family options:
#
# MROUTING enables the kernel multicast packet forwarder, which works
# with mrouted and XORP.
#
# IPFIREWALL enables support for IP firewall construction, in
# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
# limits the number of times a matching entry can be logged.
#
# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
# and if you do not add other rules during startup to allow access,
# YOU WILL LOCK YOURSELF OUT. It is suggested that you set =
firewall_type=3Dopen
# in /etc/rc.conf when first enabling this feature, then refining the
# firewall rules in /etc/rc.firewall after you've tested that the new =
kernel
# feature works properly.
#
# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
# allow everything. Use with care, if a cracker can crash your
# firewall machine, they can get to your protected machines. However,
# if you are using it as an as-needed filter for specific problems as
# they arise, then this may be for you. Changing the default to 'allow'
# means that you won't get stuck if the kernel and /sbin/ipfw binary get
# out of sync.
#
# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
# depends on IPFIREWALL if compiled into the kernel.
#
# IPFIREWALL_FORWARD enables changing of the packet destination either
# to do some sort of policy routing or transparent proxying. Used by
# ``ipfw forward''. All redirections apply to locally generated
# packets too. Because of this great care is required when
# crafting the ruleset.
#
# IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires
# LIBALIAS. To build an ipfw kld with nat support enabled, add=20
# "CFLAGS+=3D -DIPFIREWALL_NAT" to your make.conf.
#
# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
# packets without touching the TTL). This can be useful to hide =
firewalls
# from traceroute and similar tools.
#
# TCPDEBUG enables code which keeps traces of the TCP state machine
# for sockets with the SO_DEBUG option set, which can then be examined
# using the trpt(8) utility.
#
#options MROUTING # Multicast routing
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
options IPFIREWALL_VERBOSE_LIMIT=3D100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by =
default
options IPFIREWALL_FORWARD #packet destination changes
options IPFIREWALL_NAT #ipfw kernel nat support
options IPDIVERT #divert sockets
options IPFILTER #ipfilter support
options IPFILTER_LOG #ipfilter logging
options IPFILTER_LOOKUP #ipfilter pools
#options IPFILTER_DEFAULT_BLOCK #block all packets by default
options IPSTEALTH #support for stealth forwarding
# The MBUF_STRESS_TEST option enables options which create
# various random failures / extreme cases related to mbuf
# functions. See mbuf(9) for a list of available test cases.
#options MBUF_STRESS_TEST
# Statically Link in accept filters
options ACCEPT_FILTER_DATA
options ACCEPT_FILTER_HTTP
# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
# carried in TCP option 19. This option is commonly used to protect
# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
# This is enabled on a per-socket basis using the TCP_MD5SIG socket =
option.
# This requires the use of 'device crypto', 'options IPSEC'
# or 'device cryptodev'.
#options TCP_SIGNATURE #include support for RFC 2385
# DUMMYNET enables the "dummynet" bandwidth limiter. You need =
IPFIREWALL
# as well. See dummynet(4) and ipfw(8) for more info. When you run
# DUMMYNET it is advisable to also have "options HZ=3D1000" to achieve a
# smoother scheduling of the traffic.
options DUMMYNET
options HZ=3D1000
# Zero copy sockets support. This enables "zero copy" for sending and
# receiving data via a socket. The send side works for any type of NIC,
# the receive side only works for NICs that support MTUs greater than =
the
# page size of your architecture and that support header splitting. See
# zero_copy(9) for more details.
#options ZERO_COPY_SOCKETS
# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
# Individual node types can be enabled with the corresponding option
# listed below; however, this is not strictly necessary as netgraph
# will automatically load the corresponding KLD module if the node type
# is not already compiled into the kernel. Each type below has a
# corresponding man page, e.g., ng_async(8).
options NETGRAPH # netgraph(4) system
# In order to enable IPSEC you MUST also add device crypto to=20
# your kernel configuration
options IPSEC #IP security (requires device =
crypto)
device crypto
dmesg.boot:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC2 #0: Sat Oct 31 20:01:37 IRKT 2009
root at ns.mk.local:/usr/obj/usr/src/sys/mk64-8
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz (2339.14-MHz =
K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x6f7 Stepping =3D 7
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
=
Features2=3D0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDC=
M,DCA>
AMD Features=3D0x20100800<SYSCALL,NX,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant
real memory =3D 2147483648 (2048 MB)
avail memory =3D 2055802880 (1960 MB)
ACPI APIC Table: <INTEL S5000VSA>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <INTEL S5000VSA> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xca2,0xca3,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2020-0x203f =
mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on =
pci5
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:53:6c:a8
em1: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x2000-0x201f =
mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on =
pci5
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:15:17:53:6c:a9
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
amr0: <LSILogic MegaRAID 1.53> mem 0xb8a00000-0xb8a0ffff irq 24 at =
device 1.0 on pci6
amr0: Using 64-bit DMA
amr0: [ITHREAD]
amr0: <LSILogic Intel(R) RAID Controller SRCS16> Firmware 713S, BIOS =
G401, 64MB RAM
pcib7: <PCI-PCI bridge> at device 3.0 on pci0
pci7: <PCI bus> on pcib7
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib8
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port =
0x30a0-0x30bf irq 23 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup =3D 0x2f00
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port =
0x3080-0x309f irq 22 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup =3D 0x2f00
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port =
0x3060-0x307f irq 23 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup =3D 0x2f00
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port =
0x3040-0x305f irq 22 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup =3D 0x2f00
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq =
23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci9: <ACPI PCI bus> on pcib9
vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem =
0xb0000000-0xb7ffffff,0xb8b00000-0xb8b0ffff irq 17 at device 12.0 on =
pci9
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30c0-0x30cf irq 20 at device 31.1 =
on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port =
0x30d8-0x30df,0x30f4-0x30f7,0x30d0-0x30d7,0x30f0-0x30f3,0x3020-0x303f =
mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI called from vendor specific driver
atapci1: AHCI v1.10 controller with 6 3Gbps ports, PM supported
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci1
ata7: [ITHREAD]
ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port =
0x3000-0x301f irq 20 at device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
device_attach: acpi_perf0 attach returned 6
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
cpu1: <ACPI CPU> on acpi0
device_attach: acpi_perf1 attach returned 6
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
device_attach: acpi_perf1 attach returned 6
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
cpu2: <ACPI CPU> on acpi0
device_attach: acpi_perf2 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
device_attach: acpi_perf2 attach returned 6
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
cpu3: <ACPI CPU> on acpi0
device_attach: acpi_perf3 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
device_attach: acpi_perf3 attach returned 6
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
ipmi1: <IPMI System Interface> on isa0
device_attach: ipmi1 attach returned 16
orm0: <ISA Option ROM> at iomem 0xc0000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v4.1.28 initialized. Default =3D pass all, Logging =3D =
enabled
ipfw2 initialized, divert enabled, nat enabled, rule-based forwarding =
enabled, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad4: 305245MB <WDC WD3201ABYS-01B9A0 13.01C02> at ata2-master SATA300
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ipmi0: IPMI device rev. 1, firmware rev. 0.2, version 2.0
ipmi0: Number of channels 5
ipmi0: Attached watchdog
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 953674MB (1953124352 sectors) RAID 1 (optimal)
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
Please help resolve this trouble.
Thanks!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C68C8D17-C912-4195-9D1B-EC5CE08771F6>