Date: Tue, 13 Jan 2004 10:11:13 +0100 From: Kurt Jaeger <pi@LF.net> To: FreeBSD-gnats-submit@FreeBSD.org Cc: pi@LF.net Subject: i386/61303: 5.2-REL hangs during boot with 3-port pyramid.de NIC (worked on 4.7-4.9) Message-ID: <E1AgKZt-000Fft-U1@complx.LF.net> Resent-Message-ID: <200401130920.i0D9KHaA047346@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 61303 >Category: i386 >Synopsis: 5.2-REL hangs during boot with 3-port pyramid.de NIC (worked on 4.7-4.9) >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jan 13 01:20:17 PST 2004 >Closed-Date: >Last-Modified: >Originator: Kurt Jaeger >Release: FreeBSD 5.2-RELEASE i386 >Organization: LF.net Netzwerksysteme GmbH >Environment: System: FreeBSD toast.c0mplx.org 4.9-RELEASE FreeBSD 4.9-RELEASE #6: Wed Dec 31 21:17:12 CET 2003 pi@toast.c0mplx.org:/usr/src/sys/compile/TOAST i386 The same system hangs during boot, see below, therefore no uname -a of the 5.2 system. >Description: There is a vendor in Germany for 3-port NICs based on the Intel 82559ER Embedded 10/100 Ethernet chip: http://www.pyramid.de/d/builttosuit/3nic.shtml?id=4 When this board is installed, the 5.2 REL iso does not boot. It hungs right after the PCI bridge is detected. Here's the output of pciconv -l -v on a freebsd 4.9 system: pcib3@pci2:12:0: class=0x060400 card=0x000000dc chip=0xb1528086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' device = 'S21152BB PCI to PCI Bridge' class = bridge subclass = PCI-PCI fxp0@pci3:0:0: class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '82559ER Fast Ethernet Controller' class = network subclass = ethernet fxp1@pci3:1:0: class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '82559ER Fast Ethernet Controller' class = network subclass = ethernet fxp2@pci3:2:0: class=0x020000 card=0x00000000 chip=0x12098086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '82559ER Fast Ethernet Controller' class = network subclass = ethernet none6@pci3:3:0: class=0x070103 card=0x00001415 chip=0x84031415 rev=0x00 hdr=0x00 vendor = 'Oxford Semiconductor Ltd' device = 'OX12PCI840 PCI Parallel Port' class = simple comms subclass = parallel port On a 4.9, it is detected during bootup as pcib3: <PCI to PCI bridge (vendor=8086 device=b152)> at device 12.0 on pci2 pci3: <PCI bus> on pcib3 fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb800-0xb83f mem 0xe8800000 -0xe881ffff,0xe9000000-0xe9000fff irq 10 at device 0.0 on pci3 fxp0: Ethernet address 00:50:c2:01:fc:0c inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb400-0xb43f mem 0xe7800000 -0xe781ffff,0xe8000000-0xe8000fff irq 9 at device 1.0 on pci3 fxp1: Ethernet address 00:50:c2:01:fc:0d inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp2: <Intel 82559ER Embedded 10/100 Ethernet> port 0xb000-0xb03f mem 0xe6800000 -0xe681ffff,0xe7000000-0xe7000fff irq 9 at device 2.0 on pci3 fxp2: Ethernet address 00:50:c2:01:fc:0e inphy2: <i82555 10/100 media interface> on miibus2 inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci3: <unknown card> (vendor=0x1415, dev=0x8403) at 3.0 irq 11 On a 5.2, it hungs after the pci3: <PCI bus> on pcib3 >How-To-Repeat: Boot 5.2 ISO, wait for system hang. >Fix: No idea right now. >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1AgKZt-000Fft-U1>