Date: Mon, 10 Dec 2018 14:46:42 -0500 From: Zaphod Beeblebrox <zbeeble@gmail.com> To: FreeBSD Net <freebsd-net@freebsd.org>, FreeBSD Stable <freebsd-stable@freebsd.org> Subject: 12.0 RC3 fails to use em0. Message-ID: <CACpH0MckR9GSTn2ObMui7kk4rm7Ho3sa_XT4PCUuAG2viCGn-g@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
So... if I choose live CD and type "ifconfig em0 up" followed by "dhclient em0" ... everything works... but if I go through the install, select something that isn't on the media and continue, selecting em0 as my network, and ipv4->DHCP ... I see "sendmeg on em0: No buffer space available" ... If I don't choose anything off-media, but still choose ipv4->DHCP->em0 later, It fails inconsequentially, and on reboot it still says "sendmsg on em0: No buffer space available" ... but then it succeeds later after loading uhid.ko (just giving that for ordering... uhid.ko isn't loaded for the livecd, I don't believe). The machine is and HP Compaq 8100 Elite with an i5 660 and 4G RAM. The em0 is on the motherboard and probes as: em0: <Intel(R) PRO/1000 Network Connection> port 0x3100-0x311f mem 0xf0400000-0xf041ffff,0xf0425000-0xf0425fff irq 19 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: 40:61:86:xx:xx:xx em0: netmap queues/slots: TX 1/1024, RX 1/1024 em0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACpH0MckR9GSTn2ObMui7kk4rm7Ho3sa_XT4PCUuAG2viCGn-g>