Date: Tue, 12 Jun 2001 08:58:46 -0600 From: Stacy Millions <stacy@millions.ca> To: non@ever.sanda.gr.jp Cc: mobile@FreeBSD.ORG Subject: Re: Please test updated ncv, nsp and stg drivers Message-ID: <3B262E26.55FC50E2@millions.ca> References: <20010611221111P.non@ever.sanda.gr.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
non@ever.sanda.gr.jp wrote: > > The ncv, nsp and stg drivers have been updated to catch up with > NetBSD/pc98. Patches for -current and -stable are placed at, > > http://home.jp.freebsd.org/~non/current.diff.gz > http://home.jp.freebsd.org/~non/stable.diff.gz I updated my stable sources and rebuilt the world last night and applied your patch this morning. My HP [KME] SCIS card attaches OK, probes thecd fine, but I can't use the cd. I have tried mounting a cd, dd if=/dev/cd0c ..., tosha and cdda2wav but nothing is working. Relevant bits of dmesg below. Let me know if I you need additional info. -stacy FreeBSD bonsai.millions.ca 4.3-STABLE FreeBSD 4.3-STABLE #3: Tue Jun 12 07:48:25 MDT 2001 stacy@bonsai.millions.ca:/usr/obj/usr/src/sys/bonsai i386 [insert HP (KME) SCSI card] pccard: card inserted, slot 0 nsp0 at port 0x240-0x24f iomem 0xd1000-0xd1fff irq 3 slot 0 on pccard0 nsp0: try to reset scsi bus nsp0(1:0): period(100 ns) offset(15) width(0) flags 0x9<cmdlnk,sync> cd0 at nsp0 bus 0 target 1 lun 0 cd0: <hp CD-Writer+ M820 1.23> Removable CD-ROM SCSI-2 device cd0: cd present [208650 x 2048 byte records] >>>>> SCSI_LOW_INFO: scsi bus hangup. try to recover. nsp0: === NEXUS T(0xc1159a00) L(0xc1157300) Q(0x0) NIO(1) === nsp0(0:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159900) L(0xc1157280) Q(0xc1160e00) NIO(1) === nsp0(1:0) ph<CMDOUT> => ph<DATA> DISC(0) QIO(0:0) CCB: cmd[0] 0x43 clen 0xa dlen 0xffffffff<0x800 stat 0xff err 0x4 MSGIN: ptr(0) [0][3][1][25][8] attention: 0 MSGOUT: msgflags 0x0 [80][3][1][25][8] msgoutlen 1 C_FLAGS: 9<cmdlnk,sync> MIN LOG : (0) MOUT LOG: (1) [80][0]> SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159800) L(0xc1157200) Q(0x0) NIO(1) === nsp0(2:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159700) L(0xc1157180) Q(0x0) NIO(1) === nsp0(3:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159600) L(0xc1157100) Q(0x0) NIO(1) === nsp0(4:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159500) L(0xc1157080) Q(0x0) NIO(1) === nsp0(5:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159400) L(0xc1157000) Q(0x0) NIO(1) === nsp0(6:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1159300) L(0xc115af80) Q(0x0) NIO(1) === nsp0(7:0) ph<FREE> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x0 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aafc70 dlen 0x600 stat 0xff err 0x0 nsp0: try to reset scsi bus [remove HP (KME) SCSI card] nsp0: unload (cd0:nsp0:0:1:0): lost device (cd0:nsp0:0:1:0): removing device entry nsp0: detached pccard: card removed, slot 0 stray irq 3 pccard: card inserted, slot 0 nsp0 at port 0x240-0x24f iomem 0xd1000-0xd1fff irq 3 slot 0 on pccard0 nsp0: try to reset scsi bus nsp0: unload nsp0: detached pccard: card removed, slot 0 stray irq 3 [insert Adaptec SCSI card] pccard: card inserted, slot 0 aic0: <Adaptec 6260/6360 SCSI controller> at port 0x340-0x35f iomem 0xd4000-0xd4fff irq 3 slot 0 on pccard0 aic0: aic6360, dma, disconnection, parity check cd0 at aic0 bus 0 target 1 lun 0 cd0: <hp CD-Writer+ M820 1.23> Removable CD-ROM SCSI-2 device cd0: 5.000MB/s transfers (5.000MHz, offset 8) cd0: cd present [184790 x 2048 byte records] [remove Adaptec SCSI card] (cd0:aic0:0:1:0): lost device (cd0:aic0:0:1:0): removing device entry aic0: detached pccard: card removed, slot 0 stray irq 3 [insert HP (KME) SCSI card] pccard: card inserted, slot 0 nsp0 at port 0x240-0x24f iomem 0xd1000-0xd1fff irq 3 slot 0 on pccard0 nsp0: try to reset scsi bus nsp0(1:0): period(100 ns) offset(15) width(0) flags 0x9<cmdlnk,sync> cd0 at nsp0 bus 0 target 1 lun 0 cd0: <hp CD-Writer+ M820 1.23> Removable CD-ROM SCSI-2 device cd0: cd present [184790 x 2048 byte records] >>>>> SCSI_LOW_INFO: scsi bus hangup. try to recover. nsp0: === NEXUS T(0xc1159a00) L(0xc1154800) Q(0x0) NIO(1) === nsp0(0:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1141f00) L(0xc1157080) Q(0xc1159100) NIO(1) === nsp0(1:0) ph<CMDOUT> => ph<DATA> DISC(0) QIO(0:0) CCB: cmd[0] 0x28 clen 0xa dlen 0xffffffff<0x8000 stat 0xff err 0x4 MSGIN: ptr(0) [0][3][1][25][8] attention: 0 MSGOUT: msgflags 0x0 [80][3][1][25][8] msgoutlen 1 C_FLAGS: 9<cmdlnk,sync> MIN LOG : (0) MOUT LOG: (1) [80][0]> SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1153900) L(0xc1157100) Q(0x0) NIO(1) === nsp0(2:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1167200) L(0xc1157180) Q(0x0) NIO(1) === nsp0(3:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1167000) L(0xc1157200) Q(0x0) NIO(1) === nsp0(4:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1169e00) L(0xc115ad80) Q(0x0) NIO(1) === nsp0(5:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1169d00) L(0xc115ae00) Q(0x0) NIO(1) === nsp0(6:0) ph<SELSTART> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x10 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: === NEXUS T(0xc1169c00) L(0xc115af80) Q(0x0) NIO(1) === nsp0(7:0) ph<FREE> => ph<FREE> DISC(0) QIO(0:0) MSGIN: ptr(0) [0][0][0][0][0] attention: 0 MSGOUT: msgflags 0x0 [0][0][0][0][0] msgoutlen 0 C_FLAGS: 1<sync> MIN LOG : (0) MOUT LOG: (0) SCB: daddr 0xc8aaf200 dlen 0x7e00 stat 0xff err 0x0 nsp0: try to reset scsi bus (cd0:nsp0:0:1:0): cddone: got error 0x6 back -- Nothing spoils fun like finding out it builds character. - Calvin Stacy Millions stacy@millions.ca Millions Consulting Limited To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B262E26.55FC50E2>