Date: Fri, 8 Feb 2013 11:35:59 +0100 From: CeDeROM <cederom@tlen.pl> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: hp usb mass storage issues Message-ID: <CAFYkXj=tgqyUSQCWP4MKkdj_42zqK9DM0Vo-ABQg24HeNjq4EA@mail.gmail.com> In-Reply-To: <201302081118.34206.hselasky@c2i.net> References: <CAFYkXjkD=oy6x2jFL1dzabSjm=FiaAQcQEA-%2B_RX=RgcmG4tig@mail.gmail.com> <201302081118.34206.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 8, 2013 at 11:18 AM, Hans Petter Selasky <hselasky@c2i.net> wrote: > Try to set the no synchronize cache quirk using usbconfig. Hello Hans :-) Yes that helps: ugen1.7: <HP> at usbus1 umass0: <HP v195b, class 0/0, rev 2.00/81.92, addr 7> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:5:0:-1: Attached to scbus5 # usbconfig -d 1.7 add_quirk UQ_MSC_NO_SYNC_CACHE da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: <hp v195b 8192> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 7728MB (15826944 512 byte sectors: 255H 63S/T 985C) Thank you! :-) What should I do to avoid this manual intervention in future? I also noticed that with another pendrive I get the device nodes, but in dmesg I get lots of this messages: (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: No sense data present (da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI status: Check Condition (da0:umass-sim0:0:0:0): SCSI sense: No sense data present (da0:umass-sim0:0:0:0): Retrying command (per sense data) Best regards :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFYkXj=tgqyUSQCWP4MKkdj_42zqK9DM0Vo-ABQg24HeNjq4EA>