Date: Tue, 23 Jun 2009 06:39:18 GMT From: Alexander Motin <mav@FreeBSD.org> To: Perforce Change Reviews <perforce@freebsd.org> Subject: PERFORCE change 164936 for review Message-ID: <200906230639.n5N6dIES048277@repoman.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=164936 Change 164936 by mav@mav_mavbook on 2009/06/23 06:38:56 Lower PCI ATA drivers priorities, to allow them been overriden. Affected files ... .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-acard.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-acerlabs.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-adaptec.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-ahci.c#5 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-amd.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-ati.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-cenatek.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-cypress.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-cyrix.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-highpoint.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-intel.c#4 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-ite.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-jmicron.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-marvell.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-micron.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-national.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-netcell.c#2 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-nvidia.c#4 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-promise.c#4 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-serverworks.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-siliconimage.c#4 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-sis.c#3 edit .. //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-via.c#3 edit Differences ... ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-acard.c#3 (text+ko) ==== @@ -93,7 +93,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_acard_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-acerlabs.c#3 (text+ko) ==== @@ -94,7 +94,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_ali_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-adaptec.c#2 (text+ko) ==== @@ -75,7 +75,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_marvell_edma_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } ATA_DECLARE_DRIVER(ata_adaptec); ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-ahci.c#5 (text+ko) ==== ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-amd.c#2 (text+ko) ==== @@ -83,7 +83,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_amd_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-ati.c#3 (text+ko) ==== @@ -136,7 +136,7 @@ ctlr->chipinit = ata_ati_ahci_chipinit; break; } - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-cenatek.c#2 (text+ko) ==== @@ -69,7 +69,7 @@ ctlr->chipinit = ata_cenatek_chipinit; device_set_desc(dev, "Cenatek Rocket Drive controller"); - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-cypress.c#2 (text+ko) ==== @@ -76,7 +76,7 @@ pci_get_subclass(dev) == PCIS_STORAGE_IDE) { device_set_desc(dev, "Cypress 82C693 ATA controller"); ctlr->chipinit = ata_cypress_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } return ENXIO; } ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-cyrix.c#2 (text+ko) ==== @@ -67,7 +67,7 @@ if (pci_get_devid(dev) == ATA_CYRIX_5530) { device_set_desc(dev, "Cyrix 5530 ATA33 controller"); ctlr->chipinit = ata_cyrix_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } return ENXIO; } ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-highpoint.c#2 (text+ko) ==== @@ -104,7 +104,7 @@ device_set_desc_copy(dev, buffer); ctlr->chip = idx; ctlr->chipinit = ata_highpoint_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-intel.c#4 (text+ko) ==== @@ -146,7 +146,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_intel_chipinit; - return 0; + return (BUS_PROBE_DEFAULT) } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-ite.c#2 (text+ko) ==== @@ -78,7 +78,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_ite_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-jmicron.c#3 (text+ko) ==== @@ -94,7 +94,7 @@ device_set_desc_copy(dev, buffer); ctlr->chip = idx; ctlr->chipinit = ata_jmicron_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-marvell.c#3 (text+ko) ==== @@ -125,7 +125,7 @@ ctlr->chipinit = ata_marvell_pata_chipinit; break; } - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-micron.c#2 (text+ko) ==== @@ -69,7 +69,7 @@ device_set_desc(dev, "RZ 100? ATA controller !WARNING! data loss/corruption risk"); ctlr->chipinit = ata_micron_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } else return ENXIO; ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-national.c#2 (text+ko) ==== @@ -68,7 +68,7 @@ if (pci_get_devid(dev) == ATA_SC1100) { device_set_desc(dev, "National Geode SC1100 ATA33 controller"); ctlr->chipinit = ata_national_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } return ENXIO; } ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-netcell.c#2 (text+ko) ==== @@ -68,7 +68,7 @@ if (pci_get_devid(dev) == ATA_NETCELL_SR) { device_set_desc(dev, "Netcell SyncRAID SR3000/5000 RAID Controller"); ctlr->chipinit = ata_netcell_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } return ENXIO; } ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-nvidia.c#4 (text+ko) ==== @@ -138,7 +138,7 @@ ctlr->chipinit = ata_ahci_chipinit; else ctlr->chipinit = ata_nvidia_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-promise.c#4 (text+ko) ==== @@ -210,7 +210,7 @@ device_set_desc_copy(dev, buffer); ctlr->chip = idx; ctlr->chipinit = ata_promise_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-serverworks.c#3 (text+ko) ==== @@ -98,7 +98,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_serverworks_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } #ifdef __powerpc__ ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-siliconimage.c#4 (text+ko) ==== @@ -115,7 +115,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_sii_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-sis.c#3 (text+ko) ==== @@ -155,7 +155,7 @@ device_set_desc_copy(dev, buffer); ctlr->chip = idx; ctlr->chipinit = ata_sis_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int ==== //depot/projects/scottl-camlock/src/sys/dev/ata/chipsets/ata-via.c#3 (text+ko) ==== @@ -120,7 +120,7 @@ ata_set_desc(dev); ctlr->chipinit = ata_via_chipinit; - return 0; + return (BUS_PROBE_DEFAULT); } static int
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200906230639.n5N6dIES048277>