Date: Tue, 13 Dec 2011 00:48:27 +0100 From: Stefan Bethke <stb@lassitu.de> To: freebsd-embedded@freebsd.org Subject: Re: TL-WR1043: switch Message-ID: <24FB4633-B729-4582-9FF6-CA8656742985@lassitu.de> In-Reply-To: <C2885254-F02C-401B-B56D-39F62933F3CC@lassitu.de> References: <68ABED76-CB1F-405A-8036-EC254F7511FA@lassitu.de> <3B3DB17D-BF87-40EE-B1C1-445F178E8844@lassitu.de> <86030CEE-6839-4B96-ACDC-2BA9AC1E4AE4@lassitu.de> <2D625CC9-A0E3-47AA-A504-CE8FB2F90245@lassitu.de> <203BF1C8-D528-40C9-8611-9C7AC7E43BAB@lassitu.de> <3C0E9CA3-E130-4E9A-ABCC-1782E28999D1@lassitu.de> <CAJ-VmomWsGy9wMb0zA-WjTRP6Qh%2BO2u_Pe-rgkerFFpi04iKnw@mail.gmail.com> <6387ABA5-AC55-49DD-9058-E45CC0A3E0A0@lassitu.de> <CAJ-VmonM91s-kbbEqVDy9PvtH-gxLWYmusGiqzqCWMtfMdoo2A@mail.gmail.com> <EA0807C1-6FEE-4743-8DCA-1AC873664005@lassitu.de> <74E4AF57-3D22-415E-B913-176753B09B16@lassitu.de> <710E2C7A-E9AC-4103-8C61-0EDC4A3AF9DE@lassitu.de> <C2885254-F02C-401B-B56D-39F62933F3CC@lassitu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
http://www.lassitu.de/freebsd/etherswitch-rtl8366rb.patch Another update: I can now set media and mediaopt: # kldload rtl8366rb rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on = iicbus0 rtl8366rb0: rev. 3 miibus0: <MII bus> on rtl8366rb0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: OUI 0x00e04c, model 0x0016, rev. 1 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto miibus1: <MII bus> on rtl8366rb0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x00e04c, model 0x0016, rev. 1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto miibus2: <MII bus> on rtl8366rb0 ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 ukphy2: OUI 0x00e04c, model 0x0016, rev. 1 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto miibus3: <MII bus> on rtl8366rb0 ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 ukphy3: OUI 0x00e04c, model 0x0016, rev. 1 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto miibus4: <MII bus> on rtl8366rb0 ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 ukphy4: OUI 0x00e04c, model 0x0016, rev. 1 ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, = 1000baseT-FDX, 1000baseT-FDX-master, auto etherswitch0: <Switch controller> on rtl8366rb0 rtl8366rb0port0: link state changed to DOWN rtl8366rb0port1: link state changed to DOWN rtl8366rb0port2: link state changed to DOWN rtl8366rb0port3: link state changed to DOWN rtl8366rb0port4: link state changed to DOWN rtl8366rb0port0: link state changed to UP rtl8366rb0port1: link state changed to UP # etherswitchcfg=20 port0: vlangroup: 1 media: Ethernet autoselect (1000baseT <full-duplex>) status: active port1: vlangroup: 0 media: Ethernet autoselect (1000baseT <full-duplex>) status: active port2: vlangroup: 0 media: Ethernet autoselect (none) status: no carrier port3: vlangroup: 0 media: Ethernet autoselect (none) status: no carrier port4: vlangroup: 0 media: Ethernet autoselect (none) status: no carrier port5: vlangroup: 0 media: Ethernet 1000baseT <full-duplex> status: active vlangroup0: vlan: 1 members 1,2,3,4,5 vlangroup1: vlan: 2 members 0,5t # etherswitchcfg port0 media 100basetx mediaopt fdx rtl8366rb0port0: link state changed to DOWN port0: vlangroup: 1 media: Ethernet 100baseTX <full-duplex> status: no carrier rtl8366rb0port0: link state changed to UP The code now reuses the if_media.c ioctl code on the kernel side, so = it's fairly compact. Stefan --=20 Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?24FB4633-B729-4582-9FF6-CA8656742985>