Date: Mon, 21 Oct 2002 04:00:38 -0500 From: Bryan Cassidy <bryanc2000@insightbb.com> To: excalibur@hub.org Cc: freebsd-questions@freebsd.org Subject: Re: Sound Blaster Live... Message-ID: <20021021040038.6ad2e596.bryanc2000@insightbb.com> In-Reply-To: <1035209839.3db40c6f5b003@webmail.hub.org> References: <1035209839.3db40c6f5b003@webmail.hub.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 21 Oct 2002 11:17:19 -0300 excalibur@hub.org wrote: > Hi All, > > I've got a SB Live card that has been working great under FreeBSD 4.7 > since it was released, however I've got 4 speakers and a sub, but only two > speakers and the sub are engaged a the moment. How can I get the two rear > speakers to be engaged with the sound card, also I've found that I can not > adjust the volumn of the card saving using the volumn control on the > speakers themselves, here's my basic config: > > FreeBSD morpheus.dreadnet.org 4.7-STABLE FreeBSD 4.7-STABLE #0: Sun Oct > 20 12:26:38 ADT 2002 > > morpheus# dmesg | grep pcm > pcm0: <Creative EMU10K1> port 0xe400-0xe41f irq 10 at device 11.0 on pci0 > > morpheus# cat /dev/sndstat > FreeBSD Audio Driver (newpcm) > Installed devices: > pcm0: <Creative EMU10K1> at io 0xe400 irq 10 (4p/2r/0v channels duplex) > > morpheus# /usr/sbin/mixer > Mixer vol is currently set to 12:12 > Mixer pcm is currently set to 25:25 > Mixer speaker is currently set to 12:12 > Mixer line is currently set to 0:0 > Mixer mic is currently set to 0:0 > Mixer cd is currently set to 0:0 > Mixer rec is currently set to 0:0 > Mixer line1 is currently set to 0:0 > Mixer phin is currently set to 0:0 > Mixer phout is currently set to 0:0 > Mixer video is currently set to 0:0 > > Can anyone help me out? Have you tried mixer vol 100? Type mixer vol 100 and it should make it louder. I have a Sound Blaster Live myself and it works fine without ANY problems. I'm using FreeBSD 4.6.2 at the moment. Well, I dont use anything else so :-) hth To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021021040038.6ad2e596.bryanc2000>