Date: Tue, 24 Mar 1998 10:51:18 -0600 From: "Jonathan E. Lyons" <parrothd@midwest.net> To: Ulf Zimmermann <ulf@Alameda.net>, questions@FreeBSD.ORG Subject: Re: I give up, how do I use ppp with -auto, chap and dynamic addresses ? Message-ID: <3.0.5.32.19980324105118.00837d60@midwest.net> In-Reply-To: <199803241406.GAA24611@Gatekeeper.Alameda.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm not totally sure about this, but are you sure that you need to logon twice? Try commenting out the accpet chap, also try adding "set openmode active"? Here's what mine looks like for a chap login.. global: accept chap deny pap set phone 1231234 set authname name set authkey password set openmode active set ifaddr 209.6.64.1/0 209.6.64.59/0 255.255.255.0 add 0 0 209.6.64.59 alias port udp 10.10.0.10:20 20 alias port tcp 10.10.0.10:20 20 alias port udp 10.10.0.10:21 21 alias port tcp 10.10.0.10:21 21 worldnet: > set phone 18085368495 > accept chap > deny pap > set authname <username> > set authkey <password> > set login "TIMEOUT 5 Please Sign-on:-\\r-ign-on:" > set timeout 120 > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > delete ALL > add 0 0 HISADDR At 06:06 AM 3/24/98 -0800, Ulf Zimmermann wrote: >Trying to dial into AT&T Worldnet, chat itself it login in, then >currently either the chap or the IP assignment fails. > >/etc/ppp/ppp.conf looks like this: > >default: > set device /dev/cuaa1 > set speed 115200 > set log Phase Chat Connect Carrier hdlc LCP IPCP CCP tun > deny lqr > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT" > >worldnet: > set phone 18085368495 > accept chap > deny pap > set authname <username> > set authkey <password> > set login "TIMEOUT 5 Please Sign-on:-\\r-ign-on:" > set timeout 120 > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > delete ALL > add 0 0 HISADDR > >Here is a syslog cut+paste: > >Mar 24 07:07:53 system3 ppp[277]: tun0: Phase: Using interface: tun0 >Mar 24 07:07:53 system3 ppp[277]: tun0: Phase: PPP Started. >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: sending: ATE1Q0^M >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting OK-AT-OK >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Wait for (5): OK --> OK >Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: ATE1Q0^M^M >Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: OK >Mar 24 07:07:55 system3 ppp[277]: tun0: Phase: Phone: 18085368495 >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: sending: ATDT18085368495^M >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Expecting CONNECT >Mar 24 07:07:55 system3 ppp[277]: tun0: Chat: Wait for (40): CONNECT --> CONNECT > >Mar 24 07:07:55 system3 ppp[277]: tun0: Connect: ^M >Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: ATDT18085368495^M^M >Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: CONNECT >Mar 24 07:08:21 system3 ppp[277]: tun0: Chat: Expecting Please >Mar 24 07:08:21 system3 ppp[277]: tun0: Chat: Wait for (5): Please --> Please >Mar 24 07:08:21 system3 ppp[277]: tun0: Connect: 115200^M >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: ^M >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: STATION ID - hnlhi02ms09am002,s >nfca05ev^M >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: ^M >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: Welcome ^M >Mar 24 07:08:23 system3 ppp[277]: tun0: Connect: Please >Mar 24 07:08:23 system3 ppp[277]: tun0: Chat: sending: Sign-on:-^M-ign-on:^M >Mar 24 07:08:23 system3 ppp[277]: tun0: Phase: *Connected! >Mar 24 07:08:23 system3 ppp[277]: tun0: IPCP: Using trigger address 255.255.255. >0 >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: State change Initial --> Closed >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: LcpSendConfigReq >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: ACFCOMP >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: PROTOCOMP >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: MRU [4] 1500 >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 >Mar 24 07:08:23 system3 ppp[277]: tun0: HDLC: HdlcOutput >Mar 24 07:08:23 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 >Mar 24 07:08:23 system3 ppp[277]: tun0: LCP: State change Closed --> Req-Sent >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: LcpSendConfigReq >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: ACFCOMP >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: PROTOCOMP >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: MRU [4] 1500 >Mar 24 07:08:26 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 >Mar 24 07:08:26 system3 ppp[277]: tun0: HDLC: HdlcOutput >Mar 24 07:08:26 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: LcpSendConfigReq >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: ACFCOMP >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: PROTOCOMP >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: MRU [4] 1500 >Mar 24 07:08:29 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 >Mar 24 07:08:29 system3 ppp[277]: tun0: HDLC: HdlcOutput >Mar 24 07:08:29 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: LcpSendConfigReq >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: ACFCOMP >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: PROTOCOMP >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: MRU [4] 1500 >Mar 24 07:08:32 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 >Mar 24 07:08:32 system3 ppp[277]: tun0: HDLC: HdlcOutput >Mar 24 07:08:32 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: LcpSendConfigReq >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: ACFCOMP >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: PROTOCOMP >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: ACCMAP [6] 00000000 >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: MRU [4] 1500 >Mar 24 07:08:35 system3 ppp[277]: tun0: LCP: MAGICNUM [6] ea63add3 >Mar 24 07:08:35 system3 ppp[277]: tun0: HDLC: HdlcOutput >Mar 24 07:08:35 system3 ppp[277]: tun0: HDLC: ff 03 c0 21 >Mar 24 07:08:38 system3 ppp[277]: tun0: LCP: State change Req-Sent --> Stopped >Mar 24 07:08:38 system3 ppp[277]: tun0: LCP: LcpLayerFinish >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Dead >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Terminate >Mar 24 07:08:39 system3 ppp[277]: tun0: IPCP: Using trigger address 255.255.255. >0 >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: Disconnected! >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: Connect time: 16 secs >Mar 24 07:08:39 system3 ppp[277]: tun0: Phase: NewPhase: Dead >Mar 24 07:08:44 system3 ppp[277]: tun0: Phase: PPP Terminated (normal). > >Any suggestions ? Tips ? > >A tired, Ulf. > >(damn, I am doing too much with Ciscos) > > >--------------------------------------------------------------------- >Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-769-2936 >Alameda Networks, Inc. | http://www.Alameda.net | Fax#: 510-521-5073 > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19980324105118.00837d60>