Date: Sat, 12 Feb 2011 09:29:25 -0500 From: Super Bisquit <superbisquit@gmail.com> To: Justin Hibbits <chmeeedalf@gmail.com> Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: How does one minimize the base environment plus Xorg for lowend machines? Message-ID: <AANLkTi=wEUYfhgWZVfuVsQfbrsg%2BtgsZ948tNdx=GDtx@mail.gmail.com> In-Reply-To: <55213959-1A94-4F25-86CB-E502C61E3C6C@gmail.com> References: <AANLkTin6Wq2MHyigDPoXxfkQmYZcb=84eqoKtd1OoJuR@mail.gmail.com> <55213959-1A94-4F25-86CB-E502C61E3C6C@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I haven't done both parts of the next question in a while. Would I do the make buildworld and make buildkernel with an output directory similar to the same command used in jails and, does it need to be native cpu platform or can it be built on same processor class: i.e G3 or can a G4 be used instead? Many thanks for the suggestion. On Fri, Feb 11, 2011 at 11:14 PM, Justin Hibbits <chmeeedalf@gmail.com>wrote: > On Feb 11, 2011, at 11:07 PM, Super Bisquit wrote: > > The G3 B&W has been volunteered as part of an effort to use a Lombard- The >> laptop has the same cpu- as a device for the visually impaired. I'm >> currently running a build of orca and attempting to lessen the build by >> removing unnecessary build options. >> The release is the 9.0-CURRENT recently announced on the mailing list. >> The attempt of porting emacspeak to the machine failed when using an old >> port on a OpenBSD install. NetBSD was difficult to boot due to not knowing >> the proper boot commands. (If someone knows how to do this or can show me >> what I did wrong, I'll be glad to read.) >> Tiny BSD seems to be optimized for i386 processors. Can this be used on a >> Lombard or a B&W with Xorg and the r128 driver? >> One of the light "Box" desktop environments can be used or the cwm from >> OpenBSD and orca setup to run along with it. >> > > Take a look at src.conf(5). I read through that then went crazy with the > WITHOUT_* options in my /etc/src.conf, to disable as much as I could for my > G4 MDD. > > - Justin >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTi=wEUYfhgWZVfuVsQfbrsg%2BtgsZ948tNdx=GDtx>