Date: Wed, 11 Dec 2002 13:35:54 +0200 (EET) From: Taavi Talvik <taavi@uninet.ee> To: freebsd-current@freebsd.org Subject: Current hangs in reboot Message-ID: <20021211132456.M20261-100000@valu.uninet.ee>
next in thread | raw e-mail | index | archive | help
Current as of yesterday (actually problem presist about
month) hangs on reboot.
Only message:
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
appears. And thereafter it is dead. Cannot break to DDB anymore over
serial console. Only RESET button helps.
Motherboard is Gigabyte GA-8PE667 Ultra. Kernel is stock GENERIC except
options
"cpu I486_CPU"
"cpu I586_CPU"
removed and
options BREAK_TO_DEBUGGER
added
dmesg below:
best regards,
taavi
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC #0: Wed Dec 11 11:09:49 EET 2002
taavi@ttserv.uninet.ee:/usr/obj/usr/src/sys/TTSERV
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06b40a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2019896096 Hz
CPU: Pentium 4 (2019.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536805376 (511 MB)
avail memory = 514392064 (490 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE31
Using $PIR table, 11 entries at 0xc00fd320
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40bf,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xb800-0xb81f irq 14 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xb000-0xb01f irq 14 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xb400-0xb41f irq 15 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
twe0: <3ware Storage Controller> port 0xa000-0xa00f irq 15 at device 1.0 on pci2
twe0: 4 ports, Firmware FE6X 1.01.18.001, BIOS BEXX 1.06.00.001
ohci0: <NEC uPD 9210 USB controller> mem 0xdf000000-0xdf000fff irq 14 at device 7.0 on pci2
usb3: OHCI version 1.0
usb3: <NEC uPD 9210 USB controller> on ohci0
usb3: USB revision 1.0
uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xdf001000-0xdf001fff irq 15 at device 7.1 on pci2
usb4: OHCI version 1.0
usb4: <NEC uPD 9210 USB controller> on ohci1
usb4: USB revision 1.0
uhub4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 7.2 (no driver attached)
fxp0: <Intel Pro/100 Ethernet> port 0xa400-0xa43f mem 0xdf003000-0xdf003fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:20:ed:4c:68:cd
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xd4000-0xd4fff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
twed0: <TwinStor, Normal> on twe0
twed0: 117799MB (241252672 sectors)
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
Mounting root from ufs:/dev/twed0s1a
------
reboot from another tty here:
------
login: Dec 11 13:21:11 ttserv su: taavi to root on /dev/ttyp0
Dec 11 13:21:22 ttserv reboot: rebooted by taavi
Dec 11 13:21:22 ttserv syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021211132456.M20261-100000>