Date: Fri, 8 Apr 2011 17:46:19 +0200 From: Dominique Goncalves <dominique.goncalves@gmail.com> To: Sergey Kandaurov <pluknet@gmail.com> Cc: freebsd-net@freebsd.org Subject: Re: ifa_add_loopback_route: insertion failed with ifconfig wlan0 up Message-ID: <BANLkTimi3xsQZ7oantjHUO4EjZ2TE3SrWQ@mail.gmail.com> In-Reply-To: <BANLkTimVPCB%2BW71NqQks%2BDSyZfS6g=f5Vw@mail.gmail.com> References: <BANLkTimXjU2a=KeTorPfk3v_8QGFRcHHnQ@mail.gmail.com> <BANLkTim4PORoS36ma1pBOJz8rj-b6NPK-Q@mail.gmail.com> <BANLkTinDiPEeujWy5P-Af9OavEONU_sobg@mail.gmail.com> <BANLkTimVPCB%2BW71NqQks%2BDSyZfS6g=f5Vw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
2011/4/8 Sergey Kandaurov <pluknet@gmail.com>: > On 8 April 2011 18:10, Dominique Goncalves > <dominique.goncalves@gmail.com> wrote: >> Hi >> >> 2011/4/6 Sergey Kandaurov <pluknet@gmail.com>: >>> On 6 April 2011 11:35, Dominique Goncalves >>> <dominique.goncalves@gmail.com> wrote: >>>> Hi, >>>> >>>> I've installed FreeBSD 8.2-RELEASE on soekris net4801 with Atheros >>>> 9280 (mini pci card) as an access point using hostapd, so far it works >>>> . Sometimes I need to disable wireless with ifconfig wlan0 down but >>>> each times I run ifconfig wlan0 up, the kernel produces this error >>>> >>>> ifa_add_loopback_route: insertion failed >>>> >>>> is this a problem ? or maybe there is a better way to disable/enable w= ireless ? >>>> >>> >>> I see this too with a dumb test: >>> >>> vlan5: flags=3D8003<UP,BROADCAST,MULTICAST> metric 0 mtu 1500 >>> =A0 =A0 =A0 =A0ether 00:00:00:00:00:00 >>> =A0 =A0 =A0 =A0inet6 fe80::21a:64ff:fe68:d005%vlan5 prefixlen 64 scopei= d 0xa >>> =A0 =A0 =A0 =A0inet 192.168.13.13 netmask 0xffffffff broadcast 192.168.= 13.13 >>> =A0 =A0 =A0 =A0nd6 options=3D3<PERFORMNUD,ACCEPT_RTADV> >>> =A0 =A0 =A0 =A0vlan: 0 parent interface: <none> >>> >>> On 8.1 ifconfig vlan5 up gives: >>> ifa_add_loopback_route: insertion failed >> >> I guess I need to submit a PR. >> >> What step did you used to reproduce the problem ? I tried (on 8.2) to >> create a vlan but was not able to reproduce the error. > > Here it is. > > # ifconfig vlan5 create > # ifconfig vlan5 192.168.13.16/32 > # ifconfig vlan5 down > # ifconfig vlan5 up Ok, I reproduced the error and I just submitted a problem report PR/156278 > -- > wbr, > pluknet > --=20 There's this old saying: "Give a man a fish, feed him for a day. Teach a man to fish, feed him for life."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTimi3xsQZ7oantjHUO4EjZ2TE3SrWQ>