Date: Thu, 6 Mar 2003 06:12:20 +0100 (CET) From: dirk.meyer@dinoex.sub.org To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/48967: CURRENT atat driver, ad0: UDMA ICRC error Message-ID: <200303060512.h265CK6f080162@home.dinoex.sub.de>
next in thread | raw e-mail | index | archive | help
>Number: 48967
>Category: kern
>Synopsis: CURRENT atat driver, ad0: UDMA ICRC error
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Mar 05 21:20:01 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: Dirk Meyer
>Release: FreeBSD 5.0-CURRENT i386
>Organization:
privat
>Environment:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1\^Y88, 1989, 1991, 1992, 1993, 1994
The Regents of the University of Cqlifornia. All rights reserved.
FreeBSD 5.0=CURRENT #0: Wed Mar 5 20:31:18 CET 2003
root@dip.dinoex.sub.de:/home/obj/usr/src/sys/GENERIC
Pveloaded elf kernel "/boot/kernel/kernel" at 0xc06c4000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc06c40a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c40f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 897754289 Hz
CPU: Intel Celeron (897.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSM,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PÇE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory 0= 234815488 (223 MB)
avail memory = 220758016 (210 MB)
Allocating major#253 to "net"
Allocating major#252 to "pci"
Pentium Pro MTRR support enabled
ACPI-1287: *** Error: Method execution failed, AE_AML_InTERNAL
ACPI-0204: *** Error: AcpiLoadTables: Could not load namespace: AE_AML_INTERNAL
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_AML_INTERNAL
ACPI: table load failed: AE_AML_INTERNAL
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 1 entries at 0xc00fe840
pcib0: <Host to PCI bridge> qt pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0x30000000-0x33ffffff at device 0.0 oj pci0
atapci0: <SiS 630S UDMA100 controller> port 0x1100-0x110f,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0x34001000-0x34001fff irq 10 at device 1.2 on pci0
usb0: OHCI tersion 1.0, legacy support
usb0: <SiÓ 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0x34002000-0x34102fff irq 10 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB reöision 1.0
uhub1: SiS OHCI root hub¬ class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <multimedia, audio> at devIce 1.4 (no driver att`ched)
pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x3400-0x34ff mem 0x34004040-0x340040ff irq 11 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:4a:39>00:a9
maibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rdphy0: 10baseT,10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xcd00\^P-0xcdfff,0xcc000-0xccffæ,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq q on atk"dc0
kbdp at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 "ytes threshold
fd0: <144 -KB 3.5" drive> on fdc0 drive 4
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus4
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <Sysôem console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, f|ags=0x300>
sio0: configured irq 4 not in bivmap of probed irqs 0
sim0: port may not be enabled
sio0 at port 0x3f8-0p3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enab,ed
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resoqrces (port9
unknown: <PNP2f13> can't assign resources (irñ)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 9590MB <HITACHI_DK23BA-10E> [19485/16/63] at ata0-master UDMA33
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: CD-RW <CD-W24E> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
,118> point_to_point
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
retrying
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
retrying
ad0: UDMA ICRC error cmd=write fcbn 2103870 of 1051935-1051938
retrying
ad0: UDMA ICRC error35-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error amd=write fsbn 2md=write fsbn 2103850 of 1051935-1051938
ad0: DMA limited to UDMfalling back to PIO mode
ad0: UDMA ICRC årror cmd=write æsbn 2103870 of 10u1935-1051938
ád0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbo 2103870 of 1051935-1051938
ad0: DMA limited to UDMA3 ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA l\^B mode
ad0:0UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to"UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870\^D\^For device
falling back to PIO mode
[COLD BOOT]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 199\^S, 1994
The Regents of the University of California. All rights reserved.
FreeBRD 5.0-CURRENT #0: Wed Mar 5 20:31:18 CET 2003
root@dip.dinoex.sub.de:/home/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c4000.
Preloaded userconfig_script "/boot/ëernel.conf" at 0xc06c40a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c40f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 897753929 Hz
CPU: Intel Ceheron (897.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a [tepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 23481\^Q488 (223 MB)
avail memory = 220758016 (250 MB)
Allocating major#253 to "net"
Alhocating$major#252 to "pci"
Pentium Pro MTRR suppopt enabled
ACPI-1287: **j Error: Method execution failed, AE_AML_InTERNAL
ACPI-0204: *** Error: AcpiLoadTables; Could not load namespace: AE_AML_INTERNAL
ACPI-0213: *** Evror: AcpiLoadTables: Could not load tables: AE_QML_INTERNAL
ACPI: table load failed: AE_AML_INTERNAL
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 1 entries at 0xc00fe840
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host ôo PCI bridge> mem 0x30000000-0x33ffffff at device 0.0 on pci0
atapci0: <SiS 630S UDMA100 controller> port 0x1100-0x110f,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0x34001000-0x34001fff irq 10 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0x3$002000-0x34002fff irq 10 at device 1.3 on pci0
usb1: OHCI version 1.0$ legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <multimedia, audio> at device 1.4 (no driver attached)
pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pcy0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x3400-0x34ff mem 0x34004000-0x340040ff irq 11 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet addresó: 00:e0:4a:39:00:a9
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX)FDX, auto
orm0: <Option ROMs> at iomem 0xcd000-0xcdfff,0xcc000-0xCcfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drkwe 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-onl{) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parqllel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
{io0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enablud
sio0 at port 0x3f8-0x3ff irq 4 flags 0X10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PÎP0303> can't assign resources (port)
unknown\^Z <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 9590MB <HI\\ACHI_DK23BA-10E> [19485/16/63] at ata0-master UDMA33
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: CD-RW <CD-W24E> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
ad0: UDMA ICRC error cmd=write fsbn 2103870 of DMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
retrying
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
retrying
ad0: UDMA ICRC error cmd=write fsbn 103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling2back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=w0ite fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, noj-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 Of 1051935-1051938
ad0: FMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error ãmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falléng back to PIO mode
ad0: UDMA ICRC error c}d=write fsbn 2143870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMC ICRC error cmd=write fsbn 2103870 of 1051935-1151938
ad0: DMA limited to UDMA33, non-Ack to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-AT\^A66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 210387° of 1051935-1051938
ad0: DMA limited to UDMA33,!non-ATA66 cable0or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935,1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: 2103870 of 1051935-1051938
ad0: DMA limiôed to UDMA33, n\^?n-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
fAlling back to PIO mode
ad0: UDMA ICRC error cid=write(fsbn 21A limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write nsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling beck to PIO mode
ad0: UDM870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cabde or device
falling back to PIO mode
ad0: UDMA ICRC eròor cmd=write fsbn 2103870 of 10µ1935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 105±935-1051938
ad0: DMA limited to(UDMA33, non-ATA66 cable or device
falling back to PIO(mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0:0DMA limited to UDMA33, non-ATA66 cable or device
fallifg back to`PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
famling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling error cmd=write fsbn 2143870 of 1055935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATk to PIO mode
ad1: UDMA ICRC error cmd=write fsbn 2103870 of 1051935-1051938
ad0: DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
ad0: UDMA ICRC error cmd=write fsbn DMA limited to UDMA33, non-ATA66 cable or device
falling back to PIO mode
[COLD BOOT]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreEBSD 5.0-CURRENT #0: Wed Mar 5 20:31:18 CET 2003
root@dip.dinoex.sub.de:/home/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c4000.
Preloaded userconfiç_script "/boot/kernel.conf" at 0xc06c40a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c40f8.
T)mecounter "i8254" frequency 1193182 Hz\^ZTimecounter "TSC" frequency 897753443 Hz
CPU: Intel$Celeron (897.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x&8a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 234815488 (223 MB)
avail memory = 220758016 (210 MB)
Allocating major#253 to "net"
Allocating major#252 to "pci"
Pentium Pro MTRR support enabled
ACPI-1287: *** Error: Method execution failed, AE_AML_INTERNAL
ACPI-0204: *** Error: AcpiLoAdTables: Could not load namespace: AA_AML_INTERNAL
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_AML_INTERNAL
ACPI: table load failed: AE_AML_INTERNAL
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 1 entries at 0xc00fe840
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0x30000000-0x33ffffff at device 0.0 on pci0
atapci0: <SiS 630S UDMA100 controller> port 0x1100-0x110f,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
/hci0: <SiS 5571 USB controller> mem 0x34001000-0x34001fff irq 10 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: Sis OHCI rgot hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self pouered
ohci1: <SiS 5571 USB controller> mem 0x34002000-0x34002fff irq 10 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB contrkller> on ohci1
usb1: USB revision 1.0
uhub1: Si\^S OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1:(3 ports with 3 removable, self powered
pci0: <multimedia, audio> at device 1.4 (no driver attached)
pci0: <simple comms> at device 1.6 (no driver attached)
p#ib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x3400-0x34ff mem 0x34004000-0x340040ff irq 11 at device 11.0 On pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:4a:39z00:á9
miibus0: <MII buó> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanaed floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic ciipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: conæigured irq 3 not in bi4map of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VOA> at port 0x3c0-8x3df iomem \^Pxa0000-0xbffbf on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> ban't assign resources (irq)
unknown: =PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources0(port)
Timecounters tick every 10.000 msec
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 9590M\^B <hITACHI_DK23BA-10E> [19485/16/63] at ata0-easter UDMA33
ata1-master: DMA limited0to UDMA33, non-ATA66 cable or device
acd0: CD-RW <CD-W24E> at a|a1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
[COLD BOOT]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Jan 31 13:42:19 CET 2003
root@dip.dinoex.sub.de:/home/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0678000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc06780ac.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 897754009 Hz
CPU: Intel Celeron (897.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 234815488 (223 MB)
avail memory = 221167616 (210 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 1 entries at 0xc00fe840
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0x30000000-0x33ffffff at device 0.0 on pci0
atapci0: <SiS 5591 ATA100 controller> port 0x1100-0x110f,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0x34001000-0x34001fff irq 10 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0x34002000-0x34002fff irq 10 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <multimedia, audio> at device 1.4 (no driver attached)
pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x3400-0x34ff mem 0x34004000-0x340040ff irq 11 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:4a:39:00:a9
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 9590MB <HITACHI_DK23BA-10E> [19485/16/63] at ata0-master UDMA100
acd0: CD-RW <CD-W24E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
lock order reversal
1st 0xc237c264 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2104
2nd 0xc2340c34 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2111
pcm0: <SiS 7018> port 0x3100-0x31ff mem 0x34003000-0x34003fff irq 5 at device 1.4 on pci0
[CVSUP and rebuild world and kernel]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Thu Mar 6 00:26:09 CET 2003
root@dip.dinoex.sub.de:/home/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c4000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xb06c40a8.
Pruloaded edf module "/boot/kernel/acpi.ko" at 0xc06c40f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 897754082 Hz
CPU: Intel Celeron (897.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 234815488 (223 MB)
avail memory = 220758016"(210 MB)
Allocating major#253(to "net"
Allocating major#252 to "pci"
Pentium Pro MTRR support enabled
ACPI-1287: *** Error: Method execution failed, AE_AML_INTERNAL
ACPI-0204: *** Error: AcpiLoadTables: Could not load namespace: AE_AML_INTERNAL
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_AML_INTERNAL
ACPI: table load failed: AE_AML_INTERLAL
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.90
Using $PIR table, 1 entries at 0xc00fe840
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0x30000000-0x33ffffff at device 0.0 on pci0
atapci0: <SiS 630S UDMA100 controller> port 0x1100-0x110f,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atqpci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCY-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0x34001000-0x3t001fff irq 10 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
ohci1: <SiS 5571 USB controller> mem 0x34002000-0x34002fff irq 10 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <multimedia, audio> at device 1.4 (no driver attached)
pci0: <simple comms> at device 1.6 (no driver attached)
pcib18 <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x34ff mem 0x34004000-0x340040ff arq 11 at device 11.0 on pci0\^Hrl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:4a:39:00:a9
miibus0: <MII bus> on rl0
rlphy0: <RealTek in\M-ternal media interface> on miibus0
rlphy0: 10baset, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0:0model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drmve> on fdc0 drive$0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <PrintEr> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 fmags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomei 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resoQrces (port)
Timecounters tick every 10.040 msec
ad0: DMA limited to UDMA33, non)ATA66 cable or device
ad0: 9590MB <HITACHI_DK23BA-10E> [19485/16/63] at ata0-master UDMA33
ata1-master: DMA limited to uDMA33, non-ATA66 cable or device
acd0: CD-RW <CD-W24E> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a\^N<118>Loading configuration files.
[switch back to old kernel]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Jan 31 13:42:19 CET 2003
root@dip.dinoex.sub.de:/home/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.ok/kernel" at 0xc0678000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc06780ac.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 897752605 Hz
CPU: Intel Celeron (897.75-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 234815488 (223 MB)
avail memory = 221167616 (210 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 1 entries at 0xc00fe840
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0x30000000-0x33ffffff at device 0.0 on pci0
atapci0: <SiS 5591 ATA100 controller> port 0x1100-0x110f,0x374-0x377,0x170-0x173,0x3f4-0x3f7,0x1f0-0x1f3 at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0x34001000-0x34001fff irq 10 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
ohci1: <SiS 5571 USB controller> mem 0x34002000-0x34002fff irq 10 at device 1.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <multimedia, audio> at device 1.4 (no driver attached)
pci0: <simple comms> at device 1.6 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x3400-0x34ff mem 0x34004000-0x340040ff irq 11 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:4a:39:00:a9
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xcd000-0xcdfff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ad0: 9590MB <HITACHI_DK23BA-10E> [19485/16/63] at ata0-master UDMA100
acd0: CD-RW <CD-W24E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
lock order reversal
1st 0xc2381264 process lock (process lock) @ /usr/src/sys/kern/kern_descrip.c:2104
2nd 0xc2347734 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:2111
pcm0: <SiS 7018> port 0x3100-0x31ff mem 0x34003000-0x34003fff irq 5 at device 1.4 on pci0
>Description:
might be some changes in the ata code?
# grep FreeBSD: /usr/src/sys/dev/ata/ata*
/usr/src/sys/dev/ata/ata-all.c: * $FreeBSD: src/sys/dev/ata/ata-all.c,v 1.169 2003/03/03 12:15:41 phk Exp $
/usr/src/sys/dev/ata/ata-all.h: * $FreeBSD: src/sys/dev/ata/ata-all.h,v 1.59 2003/02/20 20:01:01 sos Exp $
/usr/src/sys/dev/ata/ata-card.c: * $FreeBSD: src/sys/dev/ata/ata-card.c,v 1.9 2003/03/03 11:15:32 sos Exp $
/usr/src/sys/dev/ata/ata-cbus.c: * $FreeBSD: src/sys/dev/ata/ata-cbus.c,v 1.4 2003/02/20 20:01:01 sos Exp $
/usr/src/sys/dev/ata/ata-chipset.c: * $FreeBSD: src/sys/dev/ata/ata-chipset.c,v 1.11 2003/03/03 11:51:08 sos Exp $
/usr/src/sys/dev/ata/ata-disk.c: * $FreeBSD: src/sys/dev/ata/ata-disk.c,v 1.146 2003/02/25 15:33:36 sos Exp $
/usr/src/sys/dev/ata/ata-disk.h: * $FreeBSD: src/sys/dev/ata/ata-disk.h,v 1.44 2003/02/25 15:33:36 sos Exp $
/usr/src/sys/dev/ata/ata-dma.c: * $FreeBSD: src/sys/dev/ata/ata-dma.c,v 1.113 2003/02/20 20:01:01 sos Exp $
/usr/src/sys/dev/ata/ata-isa.c: * $FreeBSD: src/sys/dev/ata/ata-isa.c,v 1.13 2003/03/03 11:15:32 sos Exp $
/usr/src/sys/dev/ata/ata-pci.c: * $FreeBSD: src/sys/dev/ata/ata-pci.c,v 1.57 2003/02/25 14:46:30 sos Exp $
/usr/src/sys/dev/ata/ata-pci.h: * $FreeBSD: src/sys/dev/ata/ata-pci.h,v 1.4 2003/03/03 11:51:08 sos Exp $
/usr/src/sys/dev/ata/ata-raid.c: * $FreeBSD: src/sys/dev/ata/ata-raid.c,v 1.55 2003/02/25 15:33:36 sos Exp $
/usr/src/sys/dev/ata/ata-raid.h: * $FreeBSD: src/sys/dev/ata/ata-raid.h,v 1.21 2003/02/25 15:33:36 sos Exp $
/usr/src/sys/dev/ata/atapi-all.c: * $FreeBSD: src/sys/dev/ata/atapi-all.c,v 1.98 2003/03/03 11:15:32 sos Exp $
/usr/src/sys/dev/ata/atapi-all.h: * $FreeBSD: src/sys/dev/ata/atapi-all.h,v 1.48 2003/02/20 20:01:01 sos Exp $
/usr/src/sys/dev/ata/atapi-cam.c: * $FreeBSD: src/sys/dev/ata/atapi-cam.c,v 1.14 2003/02/27 20:56:56 njl Exp $
/usr/src/sys/dev/ata/atapi-cd.c: * $FreeBSD: src/sys/dev/ata/atapi-cd.c,v 1.132 2003/03/03 12:15:41 phk Exp $
/usr/src/sys/dev/ata/atapi-cd.h: * $FreeBSD: src/sys/dev/ata/atapi-cd.h,v 1.35 2003/02/20 20:01:01 sos Exp $
/usr/src/sys/dev/ata/atapi-fd.c: * $FreeBSD: src/sys/dev/ata/atapi-fd.c,v 1.83 2003/02/28 09:53:35 phk Exp $
/usr/src/sys/dev/ata/atapi-fd.h: * $FreeBSD: src/sys/dev/ata/atapi-fd.h,v 1.19 2003/02/28 09:53:35 phk Exp $
/usr/src/sys/dev/ata/atapi-tape.c: * $FreeBSD: src/sys/dev/ata/atapi-tape.c,v 1.74 2003/03/03 12:15:41 phk Exp $
/usr/src/sys/dev/ata/atapi-tape.h: * $FreeBSD: src/sys/dev/ata/atapi-tape.h,v 1.18 2003/02/20 20:01:01 sos Exp $
>How-To-Repeat:
working:
FreeBSD 5.0-CURRENT #0: Fri Jan 31 13:42:19 CET 2003
hanging:
FreeBSD 5.0=CURRENT #0: Wed Mar 5 20:31:18 CET 2003
FreeBSD 5.0-CURRENT #1: Thu Mar 6 00:26:09 CET 2003
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303060512.h265CK6f080162>