Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 09 Jan 2007 10:12:08 +0100
From:      Frank Staals <frankstaals@gmx.net>
To:        questions@freebsd.org
Subject:   FreeBSD 6.1-RELEASE and nfe ? 
Message-ID:  <45A35C68.1040505@gmx.net>

next in thread | raw e-mail | index | archive | help
Hey,

I am running a FreeBSD 6.1-RELEASE machine with a MSI K8N SLI-F 
mainboard, it has problems with the nve driver so I searched around on 
the internet and found this site about the nfe driver: 
http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html . 
Allthough there were no files for 6.1-RELEASE. Are there specific files 
or instructions for installing on 6.1-RELEASE. I'm not too fond of 
upgrading my system at this point and when I tried using the 
6.2-PRERELEASE files I came upon these errors during the 'make' when 
rebuilding my kernel:


-DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common 
-finline-limit=8000 --param inline-unit-growth=100 --param 
large-function-growth=1000  -mcmodel=kernel -mno-red-zone  -mfpmath=387 
-mno-sse -mno-sse2 -mno-mmx -mno-3dnow  -msoft-float 
-fno-asynchronous-unwind-tables -ffreestanding -Werror  
../../../dev/mii/dcphy.c
cc -c -O2 -frename-registers -pipe -fno-strict-aliasing  -Wall 
-Wredundant-decls -Wnested-externs -Wstrict-prototypes  
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual  
-fformat-extensions -std=c99 -g -nostdinc -I-  -I. -I../../.. 
-I../../../contrib/altq -I../../../contrib/ipfilter 
-I../../../contrib/pf -I../../../contrib/dev/ath 
-I../../../contrib/dev/ath/freebsd -I../../../contrib/ngatm 
-I../../../dev/twa -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include 
opt_global.h -fno-common -finline-limit=8000 --param 
inline-unit-growth=100 --param large-function-growth=1000  
-mcmodel=kernel -mno-red-zone  -mfpmath=387 -mno-sse -mno-sse2 -mno-mmx 
-mno-3dnow  -msoft-float -fno-asynchronous-unwind-tables -ffreestanding 
-Werror  ../../../dev/mii/e1000phy.c
../../../dev/mii/e1000phy.c: In function `e1000phy_attach':
../../../dev/mii/e1000phy.c:133: error: `MII_ANEGTICKS_GIGE' undeclared 
(first use in this function)
../../../dev/mii/e1000phy.c:133: error: (Each undeclared identifier is 
reported only once
../../../dev/mii/e1000phy.c:133: error: for each function it appears in.)
../../../dev/mii/e1000phy.c:136: error: `fast_ether' undeclared (first 
use in this function)
../../../dev/mii/e1000phy.c:137: error: `esc' undeclared (first use in 
this function)
../../../dev/mii/e1000phy.c:146: error: `MII_ANEGTICKS' undeclared 
(first use in this function)
../../../dev/mii/e1000phy.c:119: warning: unused variable `id'
../../../dev/mii/e1000phy.c: In function `e1000phy_service':
../../../dev/mii/e1000phy.c:298: warning: passing arg 1 of 
`e1000phy_mii_phy_auto' from incompatible pointer type
../../../dev/mii/e1000phy.c:398: warning: passing arg 1 of 
`e1000phy_mii_phy_auto' from incompatible pointer type
../../../dev/mii/e1000phy.c: At top level:
../../../dev/mii/e1000phy.c:484: error: conflicting types for 
'e1000phy_mii_phy_auto'
../../../dev/mii/e1000phy.c:91: error: previous declaration of 
'e1000phy_mii_phy_auto' was here
../../../dev/mii/e1000phy.c:484: error: conflicting types for 
'e1000phy_mii_phy_auto'
../../../dev/mii/e1000phy.c:91: error: previous declaration of 
'e1000phy_mii_phy_auto' was here
../../../dev/mii/e1000phy.c:91: warning: 'e1000phy_mii_phy_auto' 
declared `static' but never defined
../../../dev/mii/e1000phy.c:484: warning: 'e1000phy_mii_phy_auto' 
defined but not used
*** Error code 1

Stop in /usr/src/sys/amd64/compile/PFSERVERKERNEL.
root@FStaals$

I hope anyone can help me. If it is not possible to install nfe on 
6.1-RELEASE would upgrading to 6-STABLE allow me to install the driver ?

Regards,
-- 

-Frank Staals





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45A35C68.1040505>