Date: Wed, 28 Nov 2012 16:50:35 -0800 From: Sean Bruno <seanbru@yahoo-inc.com> To: freebsd-scsi@freebsd.org Subject: mps(4) starts enumerating at da8, not da0 Message-ID: <1354150235.3106.31.camel@powernoodle.corp.yahoo.com>
next in thread | raw e-mail | index | archive | help
Not sure why, but on a new LSI adapter I have in test here, mps(4) seems to want to start enumerating devices at da8 ... this breaks some of my "wiring hints" as it doesn't have da0-da7. Not sure what's up here? mps0@pci0:4:0:0: class=0x010700 card=0x30201000 chip=0x00721000 rev=0x03 hdr=0x00 vendor = 'LSI Logic / Symbios Logic' device = 'SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon]' class = mass storage subclass = SAS mps0: <LSI SAS2008> port 0x8000-0x80ff mem 0xdfc00000-0xdfc03fff,0xdfb80000-0xdfbbffff irq 40 at device 0.0 on pci4 mps0: Firmware: 14.00.01.00, Driver: 14.00.00.01-fbsd mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> -bash-4.2$ sudo camcontrol devlist -v scbus0 on mps0 bus 0: <SEAGATE ST3300657SS 0008> at scbus0 target 10 lun 0 (pass0,da8) <SEAGATE ST3300657SS 0008> at scbus0 target 11 lun 0 (pass1,da9) <SEAGATE ST3300657SS 0008> at scbus0 target 12 lun 0 (pass2,da10) <SEAGATE ST3300657SS 0008> at scbus0 target 13 lun 0 (pass3,da11) <SEAGATE ST3300657SS 0008> at scbus0 target 14 lun 0 (pass4,da12) <SEAGATE ST3300657SS 0008> at scbus0 target 15 lun 0 (pass5,da13) <SEAGATE ST3300657SS 0008> at scbus0 target 16 lun 0 (pass6,da14) <SEAGATE ST3300657SS 0008> at scbus0 target 17 lun 0 (pass7,da15) <SEAGATE ST3300657SS 0008> at scbus0 target 18 lun 0 (pass8,da16) <SEAGATE ST3300657SS 0008> at scbus0 target 19 lun 0 (pass9,da17) <SEAGATE ST3300657SS 0008> at scbus0 target 20 lun 0 (pass10,da18) <SEAGATE ST3300657SS 0008> at scbus0 target 21 lun 0 (pass11,da19) <LSI CORP Bobcat 0700> at scbus0 target 22 lun 0 (ses0,pass12) scbus-1 on xpt0 bus 0: <> at scbus-1 target -1 lun -1 (xpt0)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1354150235.3106.31.camel>