Date: Mon, 23 Jul 2001 13:46:32 -0400 (EDT) From: Joe Clarke <marcus@marcuscom.com> To: Martin Hasenbein <mh-freebsd-questions@Space.Net> Cc: Bjarne Wichmann Petersen <mekanix@privat.dk>, <freebsd-questions@FreeBSD.ORG> Subject: Re: Gnome 1.4 and FreeBSD 4.3 / Soundproblem under FreeBSD 4.3 Message-ID: <20010723134449.O2405-100000@shumai.marcuscom.com> In-Reply-To: <20010723191045.A92988@Space.Net>
next in thread | previous in thread | raw e-mail | index | archive | help
That's what it should do. ls /dev/snd* Should return a sndstat device, but /dev/audio* and /dev/dsp* are the main players. If audio is a problem, check the mixer(8) settings. Joe Clarke On Mon, 23 Jul 2001, Martin Hasenbein wrote: > Joe Clarke (marcus@marcuscom.com) wrote: > > You shouldn't make /dev/pcm. You need to make snd: > > > > cd /dev ; ./MAKEDEV snd0 > > > > Or snd1, if your soundcard is detected as pcm1. > > > > Joe Clarke > > > > Hi, > > I already tried to sh MAKEDEV snd0, but it didn't work, too. > The cursor waits for a few seconds, like he is doing something > and then moves on to the next line with no error message. > But when I do ls snd*, nothing appears. Everything of /dev/dsp* is there. > > > For Bjarne, > > here is the logfile: > > > XFree86 Version 4.1.0 / X Window System > (protocol Version 11, revision 0, vendor release 6510) > Release Date: 2 June 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Build Operating System: FreeBSD 4.3-RELEASE i386 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul 23 18:56:08 2001 > (==) Using config file: "/etc/X11/XF86Config" > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "My Monitor" > (**) | |-->Device "ATI Mach64 GT (264GT), aka 3D RAGE" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc105" > (**) XKB: layout: "de" > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (--) PCI:*(1:0:0) ATI Mach64 GB rev 92, Mem @ 0xe4000000/24, 0xe6000000/12, I/O @ 0xe000/8 > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.1.9 > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o > (II) Module ati: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 6.3.6 > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI), > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), > ATI Rage 128 Mobility ML (AGP) > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), > ATI Radeon VE (AGP) > (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o > (II) Module atimisc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 6.3.6 > (==) ATI(0): Chipset: "ati". > (**) ATI(0): Depth 24, (--) framebuffer bpp 32 > (II) Loading /usr/X11R6/lib/modules/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (==) ATI(0): Write-combining range (0xa0000,0x20000) was already clear > (WW) ATI(0): Failed to set write-combining range (0xf0000,0x10000) > (II) ATI(0): Primary V_BIOS segment is: 0xc000 > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) ATI(0): VESA BIOS detected > (II) ATI(0): VESA VBE DDC supported > (II) ATI(0): Manufacturer: GVT Model: 512 Serial#: 24200066 > (II) ATI(0): Year: 2001 Week: 7 > (II) ATI(0): EDID Version: 1.2 > (II) ATI(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V > (II) ATI(0): Sync: Separate > (II) ATI(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 > (II) ATI(0): Gamma: 2.20 > (II) ATI(0): DPMS capabilities: Off; RGB/Color Display > (II) ATI(0): First detailed timing is preferred mode > (II) ATI(0): redX: 0.618 redY: 0.338 greenX: 0.297 greenY: 0.608 > (II) ATI(0): blueX: 0.144 blueY: 0.101 whiteX: 0.314 whiteY: 0.332 > (II) ATI(0): Supported VESA Video Modes: > (II) ATI(0): 720x400@70Hz > (II) ATI(0): 640x480@60Hz > (II) ATI(0): 640x480@67Hz > (II) ATI(0): 640x480@72Hz > (II) ATI(0): 640x480@75Hz > (II) ATI(0): 800x600@56Hz > (II) ATI(0): 800x600@60Hz > (II) ATI(0): 800x600@72Hz > (II) ATI(0): 800x600@75Hz > (II) ATI(0): 1024x768@60Hz > (II) ATI(0): 1024x768@70Hz > (II) ATI(0): 1024x768@75Hz > (II) ATI(0): Manufacturer's mask: 0 > (II) ATI(0): Supported additional Video Mode: > (II) ATI(0): clock: 65.0 MHz Image Size: 304 x 228 mm > (II) ATI(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 > (II) ATI(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 > (II) ATI(0): Monitor name: SANYO > (II) ATI(0): Monitor name: LMU-TF150A6 > (II) ATI(0): GMZ2+SANYO > (==) ATI(0): Write-combining range (0xa0000,0x10000) was already clear > (==) ATI(0): Write-combining range (0xe6000000,0x1000) was already clear > (--) ATI(0): ATI 3D Rage Pro graphics controller detected. > (--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision 0x01. > (--) ATI(0): AGP bus interface detected; block I/O base is 0xE000. > (--) ATI(0): ATI Mach64 adapter detected. > (--) ATI(0): Internal RAMDAC (subtype 1) detected. > (==) ATI(0): RGB weight 888 > (==) ATI(0): Default visual is TrueColor > (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0) > (II) ATI(0): Using Mach64 accelerator CRTC. > (II) ATI(0): Storing hardware cursor image at 0xE47FFC00. > (II) ATI(0): Using 8 MB linear aperture at 0xE4000000. > (!!) ATI(0): Virtual resolutions will be limited to 8191 kB > due to linear aperture size and/or placement of hardware cursor image area. > (II) ATI(0): Using Block 0 MMIO aperture at 0xE6000400. > (II) ATI(0): Using Block 1 MMIO aperture at 0xE6000000. > (==) ATI(0): Write-combining range (0xa0000,0x10000) was already clear > (==) ATI(0): Write-combining range (0xe4000000,0x800000) > (==) ATI(0): Write-combining range (0xe6000000,0x1000) was already clear > (II) ATI(0): MMIO write caching enabled. > (--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB). > (WW) ATI(0): Cannot shadow an accelerated frame buffer. > (--) ATI(0): Internal programmable clock generator detected. > (--) ATI(0): Reference clock 157.5/11 (14.318) MHz. > (II) ATI(0): My Monitor: Using hsync range of 31.50-48.50 kHz > (II) ATI(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz > (II) ATI(0): Maximum clock: 199.00 MHz > (II) ATI(0): Not using default mode "640x350" (vrefresh out of range) > (II) ATI(0): Not using default mode "640x400" (vrefresh out of range) > (II) ATI(0): Not using default mode "720x400" (vrefresh out of range) > (II) ATI(0): Not using default mode "640x480" (vrefresh out of range) > (II) ATI(0): Not using default mode "640x480" (vrefresh out of range) > (II) ATI(0): Not using default mode "640x480" (vrefresh out of range) > (II) ATI(0): Not using default mode "800x600" (vrefresh out of range) > (II) ATI(0): Not using default mode "800x600" (vrefresh out of range) > (II) ATI(0): Not using default mode "800x600" (hsync out of range) > (II) ATI(0): Not using default mode "1024x768" (vrefresh out of range) > (II) ATI(0): Not using default mode "1024x768" (hsync out of range) > (II) ATI(0): Not using default mode "1024x768" (hsync out of range) > (II) ATI(0): Not using default mode "1024x768" (hsync out of range) > (II) ATI(0): Not using default mode "1152x864" (hsync out of range) > (II) ATI(0): Not using default mode "1280x960" (hsync out of range) > (II) ATI(0): Not using default mode "1280x960" (hsync out of range) > (II) ATI(0): Not using default mode "1280x1024" (hsync out of range) > (II) ATI(0): Not using default mode "1280x1024" (hsync out of range) > (II) ATI(0): Not using default mode "1280x1024" (hsync out of range) > (II) ATI(0): Not using default mode "1600x1200" (hsync out of range) > (II) ATI(0): Not using default mode "1600x1200" (hsync out of range) > (II) ATI(0): Not using default mode "1600x1200" (hsync out of range) > (II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) > (II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) > (II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode) > (II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode) > (II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode) > (II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode) > (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode) > (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode) > (II) ATI(0): Not using default mode "1400x1050" (hsync out of range) > (II) ATI(0): Not using default mode "1400x1050" (hsync out of range) > (--) ATI(0): Virtual size is 1024x768 (pitch 1024) > (**) ATI(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (**) ATI(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (**) ATI(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (--) ATI(0): Display dimensions: (30, 23) cm > (--) ATI(0): DPI set to (86, 84) > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 0.1.0 > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.1.0, module version = 1.0.0 > (--) Depth 24 pixmap format is 32 bpp > (==) ATI(0): Write-combining range (0xa0000,0x10000) was already clear > (==) ATI(0): Write-combining range (0xe4000000,0x800000) > (==) ATI(0): Write-combining range (0xe6000000,0x1000) was already clear > (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > Indirect CPU to Screen color expansion > Solid Lines > Offscreen Pixmaps > Setting up tile and stipple cache: > 32 128x128 slots > 10 256x256 slots > (==) ATI(0): Backing store disabled > (==) ATI(0): Silken mouse enabled > (**) Mouse1: Protocol: "MouseSystems" > (**) Mouse1: Core Pointer > (==) Mouse1: Buttons: 3 > (**) Mouse1: BaudRate: 1200 > (II) Keyboard "Keyboard1" handled by legacy driver > (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) > SESSION_MANAGER=local/free.beastie.de:/tmp/.ICE-unix/6917 > SetKbdSettings - type: 0 rate: 30 delay: 500 snumlk: 0 > SetKbdSettings - Succeeded > GetModeLine - scrn: 0 clock: 65000 > GetModeLine - hdsp: 1024 hbeg: 1048 hend: 1184 httl: 1344 > vdsp: 768 vbeg: 771 vend: 777 vttl: 806 flags: 10 > > Gtk-WARNING **: gtk_signal_disconnect_by_data(): could not find handler containing data (0x81371A0) > X connection to :0.0 broken (explicit kill or server shutdown). > xinit: connection to X server lost. > > waiting for X server to shut down > > > > /martin > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010723134449.O2405-100000>