Date: Sun, 4 Feb 1996 16:50:02 -0800 (PST) From: Julian Elischer <julian@ref.tfs.com> To: freebsd-bugs Subject: Re: kern/989: devfs error messages on boot Message-ID: <199602050050.QAA18208@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/989; it has been noted by GNATS. From: Julian Elischer <julian@ref.tfs.com> To: pst@Shockwave.COM Cc: FreeBSD-gnats-submit@freebsd.org Subject: Re: kern/989: devfs error messages on boot Date: Sun, 4 Feb 1996 16:46:23 -0800 (PST) Ok I'm looking at it but first I have to figure out why my newly made -current kernels crash on this system :( > > > >Number: 989 > >Category: kern > >Synopsis: devfs error messages on boot > >Confidential: no > >Severity: non-critical > >Priority: medium > >Responsible: freebsd-bugs > >State: open > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Sat Feb 3 00:40:01 PST 1996 > >Last-Modified: > >Originator: Paul Traina > >Organization: > Shockwave Engineering > >Release: FreeBSD 2.2-CURRENT i386 > >Environment: > > FreeBSD 2.2-CURRENT #0: Sat Feb 3 00:10:22 PST 1996 > pst@precipice.shockwave.com:/usr/src.current/sys/compile/PRECIPICE > > >Description: > > FreeBSD 2.2-CURRENT #0: Sat Feb 3 00:10:22 PST 1996 > pst@precipice.shockwave.com:/usr/src.current/sys/compile/PRECIPICE > CPU: Pentium (59.99-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x515 Stepping=5 > Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC> > real memory = 16777216 (16384K bytes) > avail memory = 14729216 (14384K bytes) > DEVFS: ready for devices > Probing for devices on the ISA bus: > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > ed0 at 0x280-0x29f irq 9 maddr 0xd8000 msize 8192 on isa > ed0: address 00:00:c0:93:88:53, type WD8013EPC (8 bit) > sio0 at 0x3f8-0x3ff irq 4 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > sio2 at 0x3e8-0x3ef irq 5 on isa > sio2: type 16550A > lpt0 at 0x3bc-0x3c3 irq 7 on isa > lpt0: Interrupt-driven port > lp0: TCP/IP capable interface > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: NEC 765 > fd0: 1.44MB 3.5in > bt0: Bt445S/ 0-(32bit) bus > bt0: Your card cannot DMA above 16MB boundary. Bounce buffering enabled. > bt0: reading board settings, dma=5, int=11 > bt0: version 3.37, fast sync, no parity, 32 mbxs, 32 ccbs > bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15 > bt0: targ 1 sync rate= 4.54MB/s(220ns), offset=15 > bt0: targ 2 sync rate=10.00MB/s(100ns), offset=15 > bt0: targ 4 async > bt0: targ 6 sync rate= 4.54MB/s(220ns), offset=15 > bt0: Using Strict Round robin scheme > bt0 at 0x330 irq 11 drq 5 on isa > (bt0:0:0): "QUANTUM PD1800S 3161" type 0 fixed SCSI 2 > sd0(bt0:0:0): Direct-Access 1717MB (3517856 512 byte sectors) > (bt0:1:0): "MAXTOR P0-12S JB22" type 0 fixed SCSI 1 > sd1(bt0:1:0): Direct-Access 997MB (2042265 512 byte sectors) > (bt0:2:0): "QUANTUM EMPIRE_1080S 111V" type 0 fixed SCSI 2 > sd2(bt0:2:0): Direct-Access 1029MB (2109376 512 byte sectors) > (bt0:4:0): "NEC CD-ROM DRIVE:210 1.0" type 5 removable SCSI 1 > cd0(bt0:4:0): CD-ROM > cd0(bt0:4:0): NOT READY csi:20,b,0,0 asc:b,0 > can't get the size > (bt0:6:0): "CONNER CTMS 3200 7.00" type 1 removable SCSI 2 > st0(bt0:6:0): Sequential-Access density code 0x0, drive empty > npx0 on motherboard > npx0: INT 16 interface > qcam0 at 0x3bc on isa > joy0 at 0x201 on isa > joy0: joystick > gus0 at 0x220 irq 12 drq 1 flags 0x3 on isa > at 0x220 irq 12 dma 1,3 > > devfs ready to run > Device sd2s1a: name slot allocation failed (E=17) > Device rsd2s1a: name slot allocation failed (E=17) > Device sd2s1b: name slot allocation failed (E=17) > Device rsd2s1b: name slot allocation failed (E=17) > Device sd2s1e: name slot allocation failed (E=17) > Device rsd2s1e: name slot allocation failed (E=17) > Device sd2s1a: name slot allocation failed (E=17) > Device rsd2s1a: name slot allocation failed (E=17) > Device sd2s1b: name slot allocation failed (E=17) > Device rsd2s1b: name slot allocation failed (E=17) > Device sd2s1e: name slot allocation failed (E=17) > Device rsd2s1e: name slot allocation failed (E=17) > > >How-To-Repeat: > > Boot 2.2-current as of today (2/2/96) with DEVFS. > > >Fix: > > > > >Audit-Trail: > >Unformatted: >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199602050050.QAA18208>