Date: Tue, 26 Oct 1999 23:05:08 +0200 (CEST) From: Wilko Bulte <wilko@yedi.iaf.nl> To: freebsd-alpha@freebsd.org (FreeBSD-alpha mailing list) Subject: Mach64-svga on FreeBSD/alpha Message-ID: <199910262105.XAA56041@yedi.iaf.nl>
next in thread | raw e-mail | index | archive | help
Hi,
Does anyone have FreeBSD/alpha configured with an Xserver running on
a Mach64-based SVGA card? If so, any comments on:
alpine#XF86_Mach64
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 4.0-CURRENT alpha [ELF]
Configured drivers:
Mach64: accelerated server for ATI Mach64 graphics adaptors (Patchlevel 0)
Using syscons driver with X support (version 2.0)
(using VT number 5)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mach64: Graphics device ID: "winturbo"
(**) Mach64: Monitor ID: "Idek"
(--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/
isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:
nscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X
1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
>>>>>> (--) Mach64: PCI: Mach64 CX rev 1, Aperture @ 0x81000000, Sparse I/O @
0x02ec
*** None of the configured devices were detected.***
Fatal server error:
no screens found
I'm especially puzzled by the line marked with >>>>
The card is an ATI WinTurbo which was OK in my Intel box.
TIA
--
| / o / / _ Arnhem, The Netherlands - Powered by FreeBSD -
|/|/ / / /( (_) Bulte WWW : http://www.tcja.nl http://www.freebsd.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910262105.XAA56041>