Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 13 Dec 2013 19:27:23 +0000 (UTC)
From:      Ian Lepore <ian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org
Subject:   svn commit: r259325 - in stable/10/sys: arm/broadcom/bcm2835 arm/conf boot/fdt/dts
Message-ID:  <201312131927.rBDJRN1m085857@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ian
Date: Fri Dec 13 19:27:23 2013
New Revision: 259325
URL: http://svnweb.freebsd.org/changeset/base/259325

Log:
  MFC r257062: Add the Raspberry Pi SPI controller driver.

Added:
  stable/10/sys/arm/broadcom/bcm2835/bcm2835_spi.c
     - copied unchanged from r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spi.c
  stable/10/sys/arm/broadcom/bcm2835/bcm2835_spireg.h
     - copied unchanged from r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spireg.h
  stable/10/sys/arm/broadcom/bcm2835/bcm2835_spivar.h
     - copied unchanged from r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spivar.h
Modified:
  stable/10/sys/arm/broadcom/bcm2835/files.bcm2835
  stable/10/sys/arm/conf/RPI-B
  stable/10/sys/boot/fdt/dts/bcm2835.dtsi
Directory Properties:
  stable/10/   (props changed)

Copied: stable/10/sys/arm/broadcom/bcm2835/bcm2835_spi.c (from r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spi.c)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/10/sys/arm/broadcom/bcm2835/bcm2835_spi.c	Fri Dec 13 19:27:23 2013	(r259325, copy of r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spi.c)
@@ -0,0 +1,521 @@
+/*-
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ * Copyright (c) 2013 Luiz Otavio O Souza <loos@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/rman.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/sysctl.h>
+
+#include <machine/bus.h>
+#include <machine/cpu.h>
+#include <machine/cpufunc.h>
+#include <machine/resource.h>
+#include <machine/fdt.h>
+#include <machine/frame.h>
+#include <machine/intr.h>
+
+#include <dev/fdt/fdt_common.h>
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/spibus/spi.h>
+#include <dev/spibus/spibusvar.h>
+
+#include <arm/broadcom/bcm2835/bcm2835_gpio.h>
+#include <arm/broadcom/bcm2835/bcm2835_spireg.h>
+#include <arm/broadcom/bcm2835/bcm2835_spivar.h>
+
+#include "spibus_if.h"
+
+static void bcm_spi_intr(void *);
+
+#ifdef	BCM_SPI_DEBUG
+static void
+bcm_spi_printr(device_t dev)
+{
+	struct bcm_spi_softc *sc;
+	uint32_t reg;
+
+	sc = device_get_softc(dev);
+	reg = BCM_SPI_READ(sc, SPI_CS);
+	device_printf(dev, "CS=%b\n", reg,
+	    "\20\1CS0\2CS1\3CPHA\4CPOL\7CSPOL"
+	    "\10TA\11DMAEN\12INTD\13INTR\14ADCS\15REN\16LEN"
+	    "\21DONE\22RXD\23TXD\24RXR\25RXF\26CSPOL0\27CSPOL1"
+	    "\30CSPOL2\31DMA_LEN\32LEN_LONG");
+	reg = BCM_SPI_READ(sc, SPI_CLK) & SPI_CLK_MASK;
+	if (reg % 2)
+		reg--;
+	if (reg == 0)
+		reg = 65536;
+	device_printf(dev, "CLK=%uMhz/%d=%luhz\n",
+	    SPI_CORE_CLK / 1000000, reg, SPI_CORE_CLK / reg);
+	reg = BCM_SPI_READ(sc, SPI_DLEN) & SPI_DLEN_MASK;
+	device_printf(dev, "DLEN=%d\n", reg);
+	reg = BCM_SPI_READ(sc, SPI_LTOH) & SPI_LTOH_MASK;
+	device_printf(dev, "LTOH=%d\n", reg);
+	reg = BCM_SPI_READ(sc, SPI_DC);
+	device_printf(dev, "DC=RPANIC=%#x RDREQ=%#x TPANIC=%#x TDREQ=%#x\n",
+	    (reg & SPI_DC_RPANIC_MASK) >> SPI_DC_RPANIC_SHIFT,
+	    (reg & SPI_DC_RDREQ_MASK) >> SPI_DC_RDREQ_SHIFT,
+	    (reg & SPI_DC_TPANIC_MASK) >> SPI_DC_TPANIC_SHIFT,
+	    (reg & SPI_DC_TDREQ_MASK) >> SPI_DC_TDREQ_SHIFT);
+}
+#endif
+
+static void
+bcm_spi_modifyreg(struct bcm_spi_softc *sc, uint32_t off, uint32_t mask,
+	uint32_t value)
+{
+	uint32_t reg;
+
+	mtx_assert(&sc->sc_mtx, MA_OWNED);
+	reg = BCM_SPI_READ(sc, off);
+	reg &= ~mask;
+	reg |= value;
+	BCM_SPI_WRITE(sc, off, reg);
+}
+
+static int
+bcm_spi_clock_proc(SYSCTL_HANDLER_ARGS)
+{
+	struct bcm_spi_softc *sc;
+	uint32_t clk;
+	int error;
+
+	sc = (struct bcm_spi_softc *)arg1;
+
+	BCM_SPI_LOCK(sc);
+	clk = BCM_SPI_READ(sc, SPI_CLK);
+	BCM_SPI_UNLOCK(sc);
+	clk &= 0xffff;
+	if (clk == 0)
+		clk = 65536;
+	clk = SPI_CORE_CLK / clk;
+
+	error = sysctl_handle_int(oidp, &clk, sizeof(clk), req);
+	if (error != 0 || req->newptr == NULL)
+		return (error);
+
+	clk = SPI_CORE_CLK / clk;
+	if (clk <= 1)
+		clk = 2;
+	else if (clk % 2)
+		clk--;
+	if (clk > 0xffff)
+		clk = 0;
+	BCM_SPI_LOCK(sc);
+	BCM_SPI_WRITE(sc, SPI_CLK, clk);
+	BCM_SPI_UNLOCK(sc);
+
+	return (0);
+}
+
+static int
+bcm_spi_cs_bit_proc(SYSCTL_HANDLER_ARGS, uint32_t bit)
+{
+	struct bcm_spi_softc *sc;
+	uint32_t reg;
+	int error;
+
+	sc = (struct bcm_spi_softc *)arg1;
+	BCM_SPI_LOCK(sc);
+	reg = BCM_SPI_READ(sc, SPI_CS);
+	BCM_SPI_UNLOCK(sc);
+	reg = (reg & bit) ? 1 : 0;
+
+	error = sysctl_handle_int(oidp, &reg, sizeof(reg), req);
+	if (error != 0 || req->newptr == NULL)
+		return (error);
+
+	if (reg)
+		reg = bit;
+	BCM_SPI_LOCK(sc);
+	bcm_spi_modifyreg(sc, SPI_CS, bit, reg);
+	BCM_SPI_UNLOCK(sc);
+
+	return (0);
+}
+
+static int
+bcm_spi_cpol_proc(SYSCTL_HANDLER_ARGS)
+{
+
+	return (bcm_spi_cs_bit_proc(oidp, arg1, arg2, req, SPI_CS_CPOL));
+}
+
+static int
+bcm_spi_cpha_proc(SYSCTL_HANDLER_ARGS)
+{
+
+	return (bcm_spi_cs_bit_proc(oidp, arg1, arg2, req, SPI_CS_CPHA));
+}
+
+static int
+bcm_spi_cspol0_proc(SYSCTL_HANDLER_ARGS)
+{
+
+	return (bcm_spi_cs_bit_proc(oidp, arg1, arg2, req, SPI_CS_CSPOL0));
+}
+
+static int
+bcm_spi_cspol1_proc(SYSCTL_HANDLER_ARGS)
+{
+
+	return (bcm_spi_cs_bit_proc(oidp, arg1, arg2, req, SPI_CS_CSPOL1));
+}
+
+static void
+bcm_spi_sysctl_init(struct bcm_spi_softc *sc)
+{
+	struct sysctl_ctx_list *ctx;
+	struct sysctl_oid *tree_node;
+	struct sysctl_oid_list *tree;
+
+	/*
+	 * Add system sysctl tree/handlers.
+	 */
+	ctx = device_get_sysctl_ctx(sc->sc_dev);
+	tree_node = device_get_sysctl_tree(sc->sc_dev);
+	tree = SYSCTL_CHILDREN(tree_node);
+	SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "clock",
+	    CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
+	    bcm_spi_clock_proc, "IU", "SPI BUS clock frequency");
+	SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "cpol",
+	    CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
+	    bcm_spi_cpol_proc, "IU", "SPI BUS clock polarity");
+	SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "cpha",
+	    CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
+	    bcm_spi_cpha_proc, "IU", "SPI BUS clock phase");
+	SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "cspol0",
+	    CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
+	    bcm_spi_cspol0_proc, "IU", "SPI BUS chip select 0 polarity");
+	SYSCTL_ADD_PROC(ctx, tree, OID_AUTO, "cspol1",
+	    CTLFLAG_RW | CTLTYPE_UINT, sc, sizeof(*sc),
+	    bcm_spi_cspol1_proc, "IU", "SPI BUS chip select 1 polarity");
+}
+
+static int
+bcm_spi_probe(device_t dev)
+{
+
+	if (!ofw_bus_is_compatible(dev, "broadcom,bcm2835-spi"))
+		return (ENXIO);
+
+	device_set_desc(dev, "BCM2708/2835 SPI controller");
+
+	return (BUS_PROBE_DEFAULT);
+}
+
+static int
+bcm_spi_attach(device_t dev)
+{
+	struct bcm_spi_softc *sc;
+	device_t gpio;
+	int i, rid;
+
+	if (device_get_unit(dev) != 0) {
+		device_printf(dev, "only one SPI controller supported\n");
+		return (ENXIO);
+	}
+
+	sc = device_get_softc(dev);
+	sc->sc_dev = dev;
+
+	/* Configure the GPIO pins to ALT0 function to enable SPI the pins. */
+	gpio = devclass_get_device(devclass_find("gpio"), 0);
+	if (!gpio) {
+		device_printf(dev, "cannot find gpio0\n");
+		return (ENXIO);
+	}
+	for (i = 0; i < nitems(bcm_spi_pins); i++)
+		bcm_gpio_set_alternate(gpio, bcm_spi_pins[i], BCM_GPIO_ALT0);
+
+	rid = 0;
+	sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
+	    RF_ACTIVE);
+	if (!sc->sc_mem_res) {
+		device_printf(dev, "cannot allocate memory window\n");
+		return (ENXIO);
+	}
+
+	sc->sc_bst = rman_get_bustag(sc->sc_mem_res);
+	sc->sc_bsh = rman_get_bushandle(sc->sc_mem_res);
+
+	rid = 0;
+	sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
+	    RF_ACTIVE);
+	if (!sc->sc_irq_res) {
+		bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
+		device_printf(dev, "cannot allocate interrupt\n");
+		return (ENXIO);
+	}
+
+	/* Hook up our interrupt handler. */
+	if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
+	    NULL, bcm_spi_intr, sc, &sc->sc_intrhand)) {
+		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
+		bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
+		device_printf(dev, "cannot setup the interrupt handler\n");
+		return (ENXIO);
+	}
+
+	mtx_init(&sc->sc_mtx, "bcm_spi", NULL, MTX_DEF);
+
+	/* Add sysctl nodes. */
+	bcm_spi_sysctl_init(sc);
+
+#ifdef	BCM_SPI_DEBUG
+	bcm_spi_printr(dev);
+#endif
+
+	/*
+	 * Enable the SPI controller.  Clear the rx and tx FIFO.
+	 * Defaults to SPI mode 0.
+	 */
+	BCM_SPI_WRITE(sc, SPI_CS, SPI_CS_CLEAR_RXFIFO | SPI_CS_CLEAR_TXFIFO);
+
+	/* Set the SPI clock to 500Khz. */
+	BCM_SPI_WRITE(sc, SPI_CLK, SPI_CORE_CLK / 500000);
+
+#ifdef	BCM_SPI_DEBUG
+	bcm_spi_printr(dev);
+#endif
+
+	device_add_child(dev, "spibus", -1);
+
+	return (bus_generic_attach(dev));
+}
+
+static int
+bcm_spi_detach(device_t dev)
+{
+	struct bcm_spi_softc *sc;
+
+	bus_generic_detach(dev);
+
+	sc = device_get_softc(dev);
+	mtx_destroy(&sc->sc_mtx);
+	if (sc->sc_intrhand)
+		bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intrhand);
+	if (sc->sc_irq_res)
+		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
+	if (sc->sc_mem_res)
+		bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
+
+	return (0);
+}
+
+static void
+bcm_spi_fill_fifo(struct bcm_spi_softc *sc)
+{
+	struct spi_command *cmd;
+	uint32_t cs, written;
+	uint8_t *data;
+
+	cmd = sc->sc_cmd;
+	cs = BCM_SPI_READ(sc, SPI_CS) & (SPI_CS_TA | SPI_CS_TXD);
+	while (sc->sc_written < sc->sc_len &&
+	    cs == (SPI_CS_TA | SPI_CS_TXD)) {
+		data = (uint8_t *)cmd->tx_cmd;
+		written = sc->sc_written++;
+		if (written >= cmd->tx_cmd_sz) {
+			data = (uint8_t *)cmd->tx_data;
+			written -= cmd->tx_cmd_sz;
+		}
+		BCM_SPI_WRITE(sc, SPI_FIFO, data[written]);
+		cs = BCM_SPI_READ(sc, SPI_CS) & (SPI_CS_TA | SPI_CS_TXD);
+	}
+}
+
+static void
+bcm_spi_drain_fifo(struct bcm_spi_softc *sc)
+{
+	struct spi_command *cmd;
+	uint32_t cs, read;
+	uint8_t *data;
+
+	cmd = sc->sc_cmd;
+	cs = BCM_SPI_READ(sc, SPI_CS) & SPI_CS_RXD;
+	while (sc->sc_read < sc->sc_len && cs == SPI_CS_RXD) {
+		data = (uint8_t *)cmd->rx_cmd;
+		read = sc->sc_read++;
+		if (read >= cmd->rx_cmd_sz) {
+			data = (uint8_t *)cmd->rx_data;
+			read -= cmd->rx_cmd_sz;
+		}
+		data[read] = BCM_SPI_READ(sc, SPI_FIFO) & 0xff;
+		cs = BCM_SPI_READ(sc, SPI_CS) & SPI_CS_RXD;
+	}
+}
+
+static void
+bcm_spi_intr(void *arg)
+{
+	struct bcm_spi_softc *sc;
+
+	sc = (struct bcm_spi_softc *)arg;
+	BCM_SPI_LOCK(sc);
+
+	/* Filter stray interrupts. */
+	if ((sc->sc_flags & BCM_SPI_BUSY) == 0) {
+		BCM_SPI_UNLOCK(sc);
+		return;
+	}
+
+	/* TX - Fill up the FIFO. */
+	bcm_spi_fill_fifo(sc);
+
+	/* RX - Drain the FIFO. */
+	bcm_spi_drain_fifo(sc);
+
+	/* Check for end of transfer. */
+	if (sc->sc_written == sc->sc_len && sc->sc_read == sc->sc_len) {
+		/* Disable interrupts and the SPI engine. */
+		bcm_spi_modifyreg(sc, SPI_CS,
+		    SPI_CS_TA | SPI_CS_INTR | SPI_CS_INTD, 0);
+		wakeup(sc->sc_dev);
+	}
+
+	BCM_SPI_UNLOCK(sc);
+}
+
+static int
+bcm_spi_transfer(device_t dev, device_t child, struct spi_command *cmd)
+{
+	struct bcm_spi_softc *sc;
+	int cs, err;
+
+	sc = device_get_softc(dev);
+
+	KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz, 
+	    ("TX/RX command sizes should be equal"));
+	KASSERT(cmd->tx_data_sz == cmd->rx_data_sz, 
+	    ("TX/RX data sizes should be equal"));
+
+	BCM_SPI_LOCK(sc);
+
+	/* If the controller is in use wait until it is available. */
+	while (sc->sc_flags & BCM_SPI_BUSY)
+		mtx_sleep(dev, &sc->sc_mtx, 0, "bcm_spi", 0);
+
+	/* Now we have control over SPI controller. */
+	sc->sc_flags = BCM_SPI_BUSY;
+
+	/* Clear the FIFO. */
+	bcm_spi_modifyreg(sc, SPI_CS,
+	    SPI_CS_CLEAR_RXFIFO | SPI_CS_CLEAR_TXFIFO,
+	    SPI_CS_CLEAR_RXFIFO | SPI_CS_CLEAR_TXFIFO);
+
+	/* Get the proper chip select for this child. */
+	spibus_get_cs(child, &cs);
+	if (cs < 0 || cs > 2) {
+		device_printf(dev,
+		    "Invalid chip select %d requested by %s\n", cs,
+		    device_get_nameunit(child));
+		BCM_SPI_UNLOCK(sc);
+		return (EINVAL);
+	}
+
+	/* Save a pointer to the SPI command. */
+	sc->sc_cmd = cmd;
+	sc->sc_read = 0;
+	sc->sc_written = 0;
+	sc->sc_len = cmd->tx_cmd_sz + cmd->tx_data_sz;
+
+	/*
+	 * Set the CS for this transaction, enable interrupts and announce
+	 * we're ready to tx.  This will kick off the first interrupt.
+	 */
+	bcm_spi_modifyreg(sc, SPI_CS,
+	    SPI_CS_MASK | SPI_CS_TA | SPI_CS_INTR | SPI_CS_INTD,
+	    cs | SPI_CS_TA | SPI_CS_INTR | SPI_CS_INTD);
+
+	/* Wait for the transaction to complete. */
+	err = mtx_sleep(dev, &sc->sc_mtx, 0, "bcm_spi", hz * 2);
+
+	/* Make sure the SPI engine and interrupts are disabled. */
+	bcm_spi_modifyreg(sc, SPI_CS, SPI_CS_TA | SPI_CS_INTR | SPI_CS_INTD, 0);
+
+	/* Clear the controller flags. */
+	sc->sc_flags = 0;
+
+	/*
+	 * Check for transfer timeout.  The SPI controller doesn't
+	 * return errors.
+	 */
+	if (err == EWOULDBLOCK) {
+		device_printf(sc->sc_dev, "SPI error\n");
+		err = EIO;
+	}
+
+	BCM_SPI_UNLOCK(sc);
+
+	return (err);
+}
+
+static phandle_t
+bcm_spi_get_node(device_t bus, device_t dev)
+{
+
+	/* We only have one child, the SPI bus, which needs our own node. */
+	return (ofw_bus_get_node(bus));
+}
+
+static device_method_t bcm_spi_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe,		bcm_spi_probe),
+	DEVMETHOD(device_attach,	bcm_spi_attach),
+	DEVMETHOD(device_detach,	bcm_spi_detach),
+
+	/* SPI interface */
+	DEVMETHOD(spibus_transfer,	bcm_spi_transfer),
+
+	/* ofw_bus interface */
+	DEVMETHOD(ofw_bus_get_node,	bcm_spi_get_node),
+
+	DEVMETHOD_END
+};
+
+static devclass_t bcm_spi_devclass;
+
+static driver_t bcm_spi_driver = {
+	"spi",
+	bcm_spi_methods,
+	sizeof(struct bcm_spi_softc),
+};
+
+DRIVER_MODULE(bcm2835_spi, simplebus, bcm_spi_driver, bcm_spi_devclass, 0, 0);

Copied: stable/10/sys/arm/broadcom/bcm2835/bcm2835_spireg.h (from r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spireg.h)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/10/sys/arm/broadcom/bcm2835/bcm2835_spireg.h	Fri Dec 13 19:27:23 2013	(r259325, copy of r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spireg.h)
@@ -0,0 +1,75 @@
+/*-
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ * Copyright (c) 2013 Luiz Otavio O Souza <loos@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#ifndef	_BCM2835_SPIREG_H_
+#define	_BCM2835_SPIREG_H_
+
+#define	SPI_CORE_CLK	250000000U
+#define	SPI_CS		0x00
+#define	SPI_CS_LEN_LONG		(1 << 25)
+#define	SPI_CS_DMA_LEN		(1 << 24)
+#define	SPI_CS_CSPOL2		(1 << 23)
+#define	SPI_CS_CSPOL1		(1 << 22)
+#define	SPI_CS_CSPOL0		(1 << 21)
+#define	SPI_CS_RXF		(1 << 20)
+#define	SPI_CS_RXR		(1 << 19)
+#define	SPI_CS_TXD		(1 << 18)
+#define	SPI_CS_RXD		(1 << 17)
+#define	SPI_CS_DONE		(1 << 16)
+#define	SPI_CS_LEN		(1 << 13)
+#define	SPI_CS_REN		(1 << 12)
+#define	SPI_CS_ADCS		(1 << 11)
+#define	SPI_CS_INTR		(1 << 10)
+#define	SPI_CS_INTD		(1 << 9)
+#define	SPI_CS_DMAEN		(1 << 8)
+#define	SPI_CS_TA		(1 << 7)
+#define	SPI_CS_CSPOL		(1 << 6)
+#define	SPI_CS_CLEAR_RXFIFO	(1 << 5)
+#define	SPI_CS_CLEAR_TXFIFO	(1 << 4)
+#define	SPI_CS_CPOL		(1 << 3)
+#define	SPI_CS_CPHA		(1 << 2)
+#define	SPI_CS_MASK		0x3
+#define	SPI_FIFO	0x04
+#define	SPI_CLK		0x08
+#define	SPI_CLK_MASK		0xffff
+#define	SPI_DLEN	0x0c
+#define	SPI_DLEN_MASK		0xffff
+#define	SPI_LTOH	0x10
+#define	SPI_LTOH_MASK		0xf
+#define	SPI_DC		0x14
+#define	SPI_DC_RPANIC_SHIFT	24
+#define	SPI_DC_RPANIC_MASK	(0xff << SPI_DC_RPANIC_SHIFT)
+#define	SPI_DC_RDREQ_SHIFT	16
+#define	SPI_DC_RDREQ_MASK	(0xff << SPI_DC_RDREQ_SHIFT)
+#define	SPI_DC_TPANIC_SHIFT	8
+#define	SPI_DC_TPANIC_MASK	(0xff << SPI_DC_TPANIC_SHIFT)
+#define	SPI_DC_TDREQ_SHIFT	0
+#define	SPI_DC_TDREQ_MASK	0xff
+
+#endif	/* _BCM2835_SPIREG_H_ */

Copied: stable/10/sys/arm/broadcom/bcm2835/bcm2835_spivar.h (from r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spivar.h)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/10/sys/arm/broadcom/bcm2835/bcm2835_spivar.h	Fri Dec 13 19:27:23 2013	(r259325, copy of r257062, head/sys/arm/broadcom/bcm2835/bcm2835_spivar.h)
@@ -0,0 +1,72 @@
+/*-
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ * Copyright (c) 2013 Luiz Otavio O Souza <loos@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#ifndef	_BCM2835_SPIVAR_H_
+#define	_BCM2835_SPIVAR_H_
+
+/*
+ * Only the available pins are listed here.
+ * i.e. CS2 isn't available.
+ */
+uint32_t bcm_spi_pins[] = {
+	7,	/* CS1 */
+	8,	/* CS0 */
+	9,	/* MISO */
+	10,	/* MOSI */
+	11	/* SCLK */
+};
+
+struct bcm_spi_softc {
+	device_t		sc_dev;
+	struct mtx		sc_mtx;
+	struct resource *	sc_mem_res;
+	struct resource *	sc_irq_res;
+	struct spi_command	*sc_cmd;
+	bus_space_tag_t		sc_bst;
+	bus_space_handle_t	sc_bsh;
+	uint32_t		sc_len;
+	uint32_t		sc_read;
+	uint32_t		sc_flags;
+	uint32_t		sc_written;
+	void *			sc_intrhand;
+};
+
+#define	BCM_SPI_BUSY		0x1
+
+#define BCM_SPI_WRITE(_sc, _off, _val)		\
+    bus_space_write_4(_sc->sc_bst, _sc->sc_bsh, _off, _val)
+#define BCM_SPI_READ(_sc, _off)			\
+    bus_space_read_4(_sc->sc_bst, _sc->sc_bsh, _off)
+
+#define BCM_SPI_LOCK(_sc)			\
+    mtx_lock(&(_sc)->sc_mtx)
+#define BCM_SPI_UNLOCK(_sc)			\
+    mtx_unlock(&(_sc)->sc_mtx)
+
+#endif	/* _BCM2835_SPIVAR_H_ */

Modified: stable/10/sys/arm/broadcom/bcm2835/files.bcm2835
==============================================================================
--- stable/10/sys/arm/broadcom/bcm2835/files.bcm2835	Fri Dec 13 19:17:09 2013	(r259324)
+++ stable/10/sys/arm/broadcom/bcm2835/files.bcm2835	Fri Dec 13 19:27:23 2013	(r259325)
@@ -7,6 +7,7 @@ arm/broadcom/bcm2835/bcm2835_intr.c		sta
 arm/broadcom/bcm2835/bcm2835_machdep.c		standard
 arm/broadcom/bcm2835/bcm2835_mbox.c		standard
 arm/broadcom/bcm2835/bcm2835_sdhci.c		optional sdhci
+arm/broadcom/bcm2835/bcm2835_spi.c		optional bcm2835_spi
 arm/broadcom/bcm2835/bcm2835_systimer.c		standard
 arm/broadcom/bcm2835/bcm2835_wdog.c		standard
 arm/broadcom/bcm2835/bus_space.c		optional fdt

Modified: stable/10/sys/arm/conf/RPI-B
==============================================================================
--- stable/10/sys/arm/conf/RPI-B	Fri Dec 13 19:17:09 2013	(r259324)
+++ stable/10/sys/arm/conf/RPI-B	Fri Dec 13 19:27:23 2013	(r259325)
@@ -102,6 +102,10 @@ device		smcphy
 device		mii
 device		smsc
 
+# SPI
+device		spibus
+device		bcm2835_spi
+
 # Flattened Device Tree
 options         FDT
 # Note:  DTB is normally loaded and modified by RPi boot loader, then

Modified: stable/10/sys/boot/fdt/dts/bcm2835.dtsi
==============================================================================
--- stable/10/sys/boot/fdt/dts/bcm2835.dtsi	Fri Dec 13 19:17:09 2013	(r259324)
+++ stable/10/sys/boot/fdt/dts/bcm2835.dtsi	Fri Dec 13 19:27:23 2013	(r259325)
@@ -396,6 +396,14 @@
 			};
 		};
 
+		spi0 {
+			compatible = "broadcom,bcm2835-spi",
+				     "broadcom,bcm2708-spi";
+			reg = <0x204000 0x20>;
+			interrupts = <62>;
+			interrupt-parent = <&intc>;
+		};
+
 		dma: dma {
 			compatible = "broadcom,bcm2835-dma", 
 				     "broadcom,bcm2708-dma";



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201312131927.rBDJRN1m085857>