Date: Mon, 05 Nov 2007 20:53:41 +0100 From: sam <samira.nox@gmail.com> To: d@delphij.net Cc: freebsd-current@freebsd.org, "Aryeh M. Friedman" <aryeh.friedman@gmail.com>, Justin Hibbits <jrh29@alumni.cwru.edu> Subject: Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up Message-ID: <op.t1b37ronufp0mi@localhost> In-Reply-To: <472F6B02.2030801@delphij.net> References: <472D56A1.7070206@gmail.com> <200711041119.45971.jrh29@alumni.cwru.edu> <472DD231.9030501@gmail.com> <472E67CC.9040201@delphij.net> <472E4FF0.3080801@gmail.com> <472EB211.7050001@delphij.net> <472EEADF.1000008@gmail.com> <472F466E.8050405@delphij.net> <472F5846.1020304@gmail.com> <472F5D9A.9050900@delphij.net> <op.t1b08cc6ufp0mi@localhost> <472F6773.3080801@delphij.net> <op.t1b121p9ufp0mi@localhost> <472F6B02.2030801@delphij.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi The information FreeBSD returns about the drives is correct. I noticed following problems 1) Trying to mount a cd is one of the problems. This freezes the system for about 1 to 2 minutes. Nov 5 20:17:46 sam kernel: acd1: FAILURE - MODE_SENSE_BIG timed out Nov 5 20:18:17 sam kernel: acd1: TIMEOUT - READ_BIG retrying (1 retry = left) Nov 5 20:18:48 sam kernel: acd1: TIMEOUT - READ_BIG retrying (0 retries= = left) Nov 5 20:19:18 sam kernel: acd1: FAILURE - READ_BIG timed out Nov 5 20:19:19 sam kernel: GEOM_LABEL: Label for provider acd1t01 is = iso9660/FreeBSD_bootonly. After that, the cd is mounted and works just fine. 2) Trying to watch a dvd. Nov 5 20:24:19 sam kernel: acd1: FAILURE - MODE_SENSE_BIG timed out Nov 5 20:24:49 sam kernel: acd1: WARNING - SETFEATURES SET TRANSFER MOD= E = taskqueue timeout - completing request directly Nov 5 20:24:53 sam kernel: acd1: WARNING - SETFEATURES SET TRANSFER MOD= E = taskqueue timeout - completing request directly Nov 5 20:24:53 sam kernel: acd1: FAILURE - SEND_KEY timed out Nov 5 20:25:03 sam kernel: acd1: FAILURE - MODE_SENSE_BIG timed out I tried this with several dvds of code 1 and 2. The same behaviour on th= e Optiarc and on the Asus drives. 3) If I add device atapicam to the kernel, the system won't boot. It wil= l still recognize the drives, but it will then produce read timeouts, over= and over. I tried this with hw.ata.atapi_dma set to 0 and 1. 4) Audio CDs don't seem to be recognized as such in the asus drives. It seems, that the Optiarc recognizes and plays them. Again, testet with = different cds. The errors of the drives are: asus: Nov 5 20:39:10 sam kernel: acd1: TIMEOUT - READ_BIG retrying (0 retries= = left) Nov 5 20:39:41 sam kernel: acd1: FAILURE - READ_BIG timed out Nov 5 20:41:30 sam kernel: acd1: FAILURE - MODE_SENSE_BIG timed out Nov 5 20:42:02 sam kernel: acd1: TIMEOUT - READ_BIG retrying (1 retry = left) Nov 5 20:42:32 sam kernel: acd1: TIMEOUT - READ_BIG retrying (0 retries= = left) Nov 5 20:43:03 sam kernel: acd1: FAILURE - READ_BIG timed out optiarc Nov 5 20:44:11 sam kernel: acd0: FAILURE - MODE_SENSE_BIG timed out But as mentioned, Optiarc is able to play the audiocd. 5) My devices are numberd from 4 upward. This is not a big deal. But it is confusing. If I activate the onboard jmicron controller the ad4 moves= to ad10. [Motherboard Gigabyte P35-DS4] 6) Boot freeze [timeout of drives] when having a cdrom in the drive. sam On Mon, 05 Nov 2007 20:12:02 +0100, Xin LI <delphij@delphij.net> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, Sam, > > sam wrote: >> here they are, thanks > > According to your dmesg.boot output it seems that all devices has been= > successfully probed: > > ad4: 305244MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata2-master SATA300 > ad6: 305244MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata3-master SATA300 > ad8: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata4-master SATA300 > acd0: DVDR <Optiarc DVD RW AD-7170S/1.00> at ata5-master SATA150 > acd1: DVDROM <ASUS DVD-E616A3T/1.11> at ata6-master SATA150 > acd2: DVDROM <ASUS DVD-E616A3T/1.11> at ata7-master SATA150 > > Does this match your hardware configuration, or do you have some other= > problems with the driver? > > Cheers, > - -- > Xin LI <delphij@delphij.net> http://www.delphij.net/ > FreeBSD - The Power to Serve! > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.7 (FreeBSD) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFHL2sChcUczkLqiksRAhpLAJ9UlI6yi5qL7qAhMJhUJs9l/kqP7QCgubc/ > mHEueOYcLFblVinJHCJWWdM=3D > =3DI69/ > -----END PGP SIGNATURE----- -- = Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.t1b37ronufp0mi>