Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Oct 2008 08:37:40 -0200
From:      JoaoBR <joao@matik.com.br>
To:        Chuck Swiger <cswiger@mac.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: constant zfs data corruption
Message-ID:  <200810200837.40451.joao@matik.com.br>
In-Reply-To: <E3C2EAB9-12ED-4D3E-B07A-E2FF5892D26A@mac.com>
References:  <200810171530.45570.joao@matik.com.br> <E3C2EAB9-12ED-4D3E-B07A-E2FF5892D26A@mac.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 17 October 2008 15:39:59 Chuck Swiger wrote:
> On Oct 17, 2008, at 11:30 AM, JoaoBR wrote:
> > constantly I find data corruption on ZFS volums, ever from rrdtool,
> > this
> > corrupt data happens on SATA disks, never seem on SCSI
>
> Presumably your SATA drives are correctly being reported by ZFS as
> corrupting data, and you should do something like replace cables, the
> drives themselves, perhaps try downgrading to SATA-150 rather than
> -300 if you are using the later.  Also consider running a drive
> diagnostic utility from the mfgr (or smartmontools) and doing an
> extended self-test or destructive write surface check.
>

well, hardware seems to be ok and not older than 6 month, also happens not=
=20
only on one machine ... smartctl do not report any hw failures on disk

regarding jumpering the drives to 150 you suspect a driver problem?=20

thank's

=2D-=20

Jo=E3o







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810200837.40451.joao>