Date: Wed, 16 Sep 2009 23:55:04 +0200 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org, pyunyh@gmail.com Subject: Re: CFT: axe(4) station address patch Message-ID: <200909162355.05395.hselasky@c2i.net> In-Reply-To: <20090916185256.GI1155@michelle.cdnetworks.com> References: <20090916185256.GI1155@michelle.cdnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, Can you send me the patch. Seems like the list software stripped it off. --HPS On Wednesday 16 September 2009 20:52:56 Pyun YongHyeon wrote: > Hi, > > Traditionally axe(4) didn't support reprogramming station address > (node id) as datasheet does not mention the required command. > However AX88178 datasheet has the command and it seems the command > works as expected. I've attached patch which will enable changing > ethernet address of the controller for AX88178/AX88772/AX88172. > I couldn't test it on AX88772 and AX88172 controller. So if you > have these controllers would you give it try let me know how it > goes on your controller? > > <testing> > Check the ethernet address and change it to other address with > ifconfig(8). The following command will change the ethernet address > to aa:bb:cc:dd:ee:ff. > #ifconfig ue0 down > #ifconfig ue0 ether aa:bb:cc:dd:ee:ff > #ifconfig ue0 up > After that check whether you can still use network. > > Hans, would you review the patch?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909162355.05395.hselasky>