Date: Tue, 22 Sep 1998 15:18:34 +0200 From: Gunnar Flygt <gunnar@pluto.sr.se> To: Doug White <dwhite@resnet.uoregon.edu> Cc: FreeBSD Questions <questions@FreeBSD.ORG> Subject: Re: ppp in -auto mode Message-ID: <19980922151834.C16981@sr.se> In-Reply-To: <Pine.BSF.4.03.9809211615280.11562-100000@resnet.uoregon.edu>; from Doug White on Mon, Sep 21, 1998 at 04:16:10PM -0700 References: <19980920165911.A12490@sr.se> <Pine.BSF.4.03.9809211615280.11562-100000@resnet.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Sep 21, 1998 at 04:16:10PM -0700, Doug White wrote: > On Sun, 20 Sep 1998, Gunnar Flygt wrote: > > > Due to a disk crash I had to reinstall FreeBSD. Earlier I used the > > version of ppp that I could fetch at awfulhak somewhere in May. This one > > worked beatifully with MS RAS server. I then used ppp -auto sr to make > > the ppp server work in the background. > > > > With the version shipped with 2.2.7 I am not able to use ppp -auto, I > > have to dial using ppp and the in ppp dial xxx and so on. I use exactly > > the same ppp.conf that I used on the old system. What happens in -auto > > mode is that I get a connection and then the rx and tx lights flash for > > ever without me being able to do anything on the 'network' > > > > What's the big difference? (And as an extra comment, I also fetched the > > latest version of ppp from awfulhak with the same result. > > Is the default route added correctly? I've never had ppp.linkup work. In > 3.0 we have sticky routes which solve that problem. Yes it is. It gives me the right values if I run show route. I'll test what Brian suggested. > > > This is my ppp.conf: > > > > default: > > allow user gunnar > > set device /dev/cuaa0 > > set speed 115200 > > sr: > > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 15 \"\" AT&J3E1Q0 > > OK-AT-OK \\dA > > TDI\\T TIMEOUT 40 CONNECT" > > set phone 1234567890 > > set login > > set authname mylogin > > set authkey mypassword > > set openmode active > > set ns x.x.x.x x.x.x.x #with accurate values of course > > # set dns > > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.254.0 0.0.0.0 > > enable msext > > > > and then in ppp.linkup I've got > > sr: > > delete ALL > > add 0 0 HISADDR > > Doug White > Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve > http://gladstone.uoregon.edu/~dwhite | www.freebsd.org > -- __o regards, Gunnar ---_ \<,_ email: flygt@sr.se ---- (_)/ (_) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980922151834.C16981>