Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 08 Jun 2000 13:17:11 +0100
From:      Richard Smith <rsmith@trltech.co.uk>
To:        FreeBSD Mobile <mobile@freebsd.org>
Subject:   apm and 5.0-CURRENT and Dell Inspiron
Message-ID:  <393F8EC7.15D0C207@trltech.co.uk>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------C6CE9DB731CF6851A8211BC8
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

I decided to trash a perfectly good 3.4-PAO installation on my Dell
Inspiron 7500 and replace it with the 5.0-20000506-CURRENT snapshot on
disk one of the June 2000 toolkit.

The installation went like a dream and everything was back up an running
within a couple of hours. Except for two minor problems:

1) apm which worked on 3.4-PAO does not even appear in dmesg (output
attached), although it is listed in GENERIC.

2) xli with the -fillscreen option paints a white screen.

Neither problem is a show stopper, but any advice would be much
appreciated.

Thanks
Richard.
--------------C6CE9DB731CF6851A8211BC8
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.chaos"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.chaos"

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20000506-CURRENT #0: Sat May  6 11:32:58 GMT 2000
    root@usw2.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (501.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 268369920 (262080K bytes)
avail memory = 256999424 (250976K bytes)
Preloaded elf kernel "kernel" at 0xc03ec000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 5
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0448) at 16.0 irq 5
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppi0: <Parallel I/O> on ppbus0
ppi0: can't allocate irq
device_probe_and_attach: ppi0 attach returned 12
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sn0 at port 0x300-0x30f irq 10 on isa0
unknown0: <PNP0c02> at port 0x80 iomem 0xfff80000-0xffffffff on isa0
unknown1: <PNP0c01> at port 0x330 iomem 0-0x9ffff,0xe8000-0xfffff,0x100000-0xfffffff on isa0
unknown2: <PNP0200> at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown3: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown4: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
npxisa0: <Legacy ISA coprocessor support> at port 0xf0-0xff irq 13 on isa0
unknown5: <PNP0800> at port 0x61 on isa0
unknown6: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown7: <PNP0c02> at port 0x4d0-0x4d1,0x1000-0x103f,0x1040-0x104f,0x10-0x18,0x1f,0x24-0x25,0x28-0x29,0x2c-0x2d,0x30-0x31,0x34-0x35,0x38-0x39,0x3c-0x3d,0x50-0x52,0x72-0x77,0x90-0x9f,0xa4-0xa5,0xa8-0xa9,0xac-0xad,0xb0-0xbd on isa0
unknown8: <PNP0c02> at port 0x330 iomem 0xdc000-0xdffff on isa0
unknown9: <PNP0c02> at port 0x330 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master using UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
ed1 at port 0x240-0x25f irq 3 slot 0 on pccard0
ed1: supplying EUI64: 00:e0:98:ff:fe:72:ea:ac
ed1: address 00:e0:98:72:ea:ac, type Linksys (16 bit) 
ed1: starting DAD for fe80:000b::02e0:98ff:fe72:eaac
ed1: DAD complete for fe80:000b::02e0:98ff:fe72:eaac - no duplicates found
ed1: device timeout
pid 228 (Xaccel): trap 12 with interrupts disabled
pid 228 (Xaccel): trap 7 with interrupts disabled

--------------C6CE9DB731CF6851A8211BC8--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?393F8EC7.15D0C207>