Date: Tue, 22 Aug 2000 18:09:23 +0700 (NSS) From: strange@unicon.ru To: freebsd-questions@freebsd.org, freebsd-stable@freebsd.org Subject: How can I obtain -stable for previous date ? Message-ID: <200008221109.SAA22467@mix.unicon.ru>
next in thread | raw e-mail | index | archive | help
I'm obtain -stable (RELENG_4) every 2 days via cvsup.
And do make world every time...
But after Aug 20, the system became unstable ;(
It locks on hard loading (hard HDD usage),
like a make release or even make buildworld ;(
No panic, no crashdump, nothing, full lock...
Just many HDD problems after hard reboot ;(
How can I downgrade (build an previous stable) ?
What should I tell to cvsup to extract this sources ?
And maybe there is another solve of this problem ?
I thing on hardware, change Ethernet card, HDD drives, memory...
Same problem occured.
My hardware:
M/B Iwill DBD100
2xPIII (non overclocked !) freq 4.5 x 103
2x128Mb
Promise ATA66 and 3 Seagate ATA66 HDD
% dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #1: Tue Aug 22 23:02:05 NOVST 2000
root@:/usr/src/sys/compile/REMIX2
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (463.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 268369920 (262080K bytes)
config> en apm0
config> q
avail memory = 257503232 (251468K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02ec000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02ec09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0
atapci0: Busmastering DMA not enabled
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
atapci1: <Promise ATA66 controller> port 0xe400-0xe43f,0xe000-0xe003,0xdc00-0xdc07,0xd800-0xd803,0xd400-0xd407 mem 0xdf200000-0xdf21ffff irq 16 at device 15.0 on pci0
ata2: at 0xd400 on atapci1
ata3: at 0xdc00 on atapci1
pci0: <VGA-compatible display device> at 18.0 irq 18
dc0: <Intel 21143 10/100BaseTX> port 0xe800-0xe87f mem 0xdf220000-0xdf2203ff irq 19 at device 19.0 on pci0
dc0: Ethernet address: 00:00:1c:b5:52:8f
miibus0: <MII bus> on dc0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
DUMMYNET initialized (000608)
SMP: AP CPU #1 Launched!
ad4: 29188MB <ST330630A> [59303/16/63] at ata2-master using UDMA66
ad6: 29188MB <ST330630A> [59303/16/63] at ata3-master using UDMA66
ad7: 14652MB <ST315323A> [29770/16/63] at ata3-slave using UDMA66
Mounting root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
WBR Strange Alex
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200008221109.SAA22467>