Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 19 Jul 2005 14:06:37 +0300
From:      Michael Dexter <dexter@ambidexter.com>
To:        Glenn Dawson <glenn@antimatter.net>, freebsd-questions@freebsd.org
Subject:   Re: Remove GRUB?
Message-ID:  <a06230971bf028ed53daf@[192.168.1.100]>
In-Reply-To: <6.1.0.6.2.20050719032713.10bf1da0@cobalt.antimatter.net>
References:  <a0623096fbf0282e273f5@[192.168.1.100]> <6.1.0.6.2.20050719032713.10bf1da0@cobalt.antimatter.net>

next in thread | previous in thread | raw e-mail | index | archive | help

Glenn's suggestion of fdisk lead me to bring up the fdisk man page, 
which points to boot0cfg(8). Perhaps this is the utility I am after?

Michael.



>At 03:25 AM 7/19/2005, Michael Dexter wrote:
>
>>Hello,
>>
>>I was experimenting with the GRUB bootloader and would now like to 
>>remove it. Something went wrong and I must now use a bootable CD 
>>that gives me an option to "boot to the first partition" and the 
>>system boots fine.
>>
>>man bsdlabel gives:
>>
>>Installing Bootstraps
>>      If the -B argument is specified, bootstrap code will be read from the
>>      file /boot/boot and written to the disk.
>>
>>Assuming that this affects the mbr of the who drive, I tried:
>>
>>localhost# bsdlabel -B /dev/ad0
>>localhost# bsdlabel: /dev/ad0: no valid label found
>>
>>No problem, let's try the root partition:
>>
>>bsdlabel -B /dev/da0s1a
>>
>>No error, it blinked the hard drive activity light and appears to 
>>have done something but alas, it still reports a GRUB error 21 
>>rather than given any sign of the FreeBSD loader.
>>
>>Any pointers to the rescue/install procedures applicable to this?
>
>Did you use fdisk to check and see if the first slice is marked as 
>active? Here's a sample from one of my systems:
>
>Media sector size is 512
>Warning: BIOS sector numbering starts with sector 1
>Information from DOS bootblock is:
>The data for partition 1 is:
>sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
>     start 63, size 10474317 (5114 Meg), flag 80 (active)
>         beg: cyl 0/ head 1/ sector 1;
>         end: cyl 651/ head 254/ sector 63
>The data for partition 2 is:
>sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
>     start 10474380, size 10458315 (5106 Meg), flag 0
>         beg: cyl 652/ head 0/ sector 1;
>         end: cyl 1023/ head 254/ sector 63
>The data for partition 3 is:
><UNUSED>
>The data for partition 4 is:
><UNUSED>
>
>note the flag 80 in the first entry.
>
>-Glenn
>
>>Best regards,
>>
>>Michael Dexter
>>_______________________________________________
>>freebsd-questions@freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a06230971bf028ed53daf>