Date: Thu, 20 Feb 1997 19:30:37 +0300 (MSK) From: "Maxim A. Bolotin" <max@rnd.runnet.ru> To: Stefan Esser <se@FreeBSD.org> Cc: hackers@FreeBSD.org Subject: Re: Acer ALTOS 7000 instalation problem. Message-ID: <Pine.BSF.3.95q.970220192849.337A-100000@altos.rnd.runnet.ru> In-Reply-To: <19970218205749.IK34225@x14.mi.uni-koeln.de>
next in thread | previous in thread | raw e-mail | index | archive | help
OK, Here's what I have with controller pci0
FreeBSD 2.2-970205-GAMMA #0: Wed Feb 19 19:41:06 MSK 1997
max@altos.rnd.runnet.ru:/usr/src/sys/compile/ALTOS
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 66668126 Hz, i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium (66.67-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x515 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30474240 (29760K bytes)
eisa0: <ACR1a01 (System Board)>
Probing for devices on the EISA bus
ahc0: <Adaptec aic7770 SCSI host adapter> at 0x9c00-0x9cff irq 11
ahc0: on eisa0 slot 9
ahc0: Using Level Sensitive Interrupts
ahc0: aic7770 <= Rev C, Twin Channel, A SCSI Id=7, B SCSI Id=7, 4 SCBs
ahc0: Reseting Channel B
ahc0: Reseting Channel A
ahc0: Downloading Sequencer Program...Done
ahc0: Probing channel A
ahc0 waiting for scsi devices to settle
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
(ahc0:0:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1002MB (2053880 512 byte sectors)
sd0(ahc0:0:0): with 2428 cyls, 9 heads, and an average 93 sectors/track
ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
(ahc0:1:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 1002MB (2053880 512 byte sectors)
sd1(ahc0:1:0): with 2428 cyls, 9 heads, and an average 93 sectors/track
ahc0: target 4 synchronous at 10.0MHz, offset = 0xf
(ahc0:4:0): "MICROP 4110-09NB_Nov18F TN0F" type 0 fixed SCSI 2
sd2(ahc0:4:0): Direct-Access 1002MB (2053880 512 byte sectors)
sd2(ahc0:4:0): with 2428 cyls, 9 heads, and an average 93 sectors/track
ahc0: Probing Channel B
ahc0 waiting for scsi devices to settle
(ahc0:5:0): "MATSHITA CD-ROM CR-503 1.0f" type 5 removable SCSI 2
cd0(ahc0:5:0): CD-ROM can't get the size
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x81000800
pcibus_setup(2): mode 2 enable port (0x0cf8) is 0x00
pcibus_setup(2a): mode2res=0x0e (0x0e)
pcibus_setup(2a): now trying mechanism 2
pcibus_check: device 0 1 2 3 is there (id=00000021)
Probing for devices on PCI bus 0:
configuration mode 2 allows 16 devices.
vga0 <Display device> rev 0 int _ irq ?? on pci0:3
vga1 <Display device> rev 0 int _ irq ?? on pci0:7
vga? <Display device> mirrored on pci0:11
vga? <Display device> mirrored on pci0:15
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <6 virtual consoles, flags=0x0>
ed0 at 0x300-0x31f irq 5 on isa
ed0: address 00:c0:df:81:30:50, type NE2000 (16 bit)
ed1 at 0x340-0x35f irq 10 on isa
ed1: address 00:40:05:1a:fd:45, type NE2000 (16 bit)
ed2 at 0x320-0x33f irq 9 on isa
ed2: address 00:40:05:17:e5:9d, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16450
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16450
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 765
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
imasks: bio c0000840, tty c00306ba, net c00306ba
BIOS Geometries:
0:03e93f20 0..1001=1002 cylinders, 0..63=64 heads, 1..32=32 sectors
1:03e93f20 0..1001=1002 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
Considering FFS root f/s.
configure() finished.
IP packet filtering initialized, divert disabled, logging disabled
And Now I work, but with floppy not.
Regards,
Max.
-
Rostov State University Computer Center
Rostov-on-Don, +7 (8632) 285794 or 357476
Russia, RUNNet max@run.net.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.970220192849.337A-100000>