Date: Sun, 27 Apr 2014 12:13:28 -0700 (PDT) From: Laszlo Danielisz <laszlo.danielisz@yahoo.com> To: David Banning <david+dated+1398981314.cf0c62@skytracker.ca>, "questions@freebsd.org" <questions@freebsd.org> Subject: Re: pppoe comes up - but can't reconnect Message-ID: <1398626008.33439.YahooMailNeo@web160705.mail.bf1.yahoo.com> In-Reply-To: <20140426215512.GA2592@skytracker.ca> References: <20140426215512.GA2592@skytracker.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi David,=0A=0ATry with these lines in pppoe.conf, it might help:=A0 set re= dial 10 10000=0A=0A=A0 set reconnect 10 10000=0A=0ACheers,=0ALaszlo=0AOn Sa= turday, April 26, 2014 11:57 PM, David Banning <david+dated+1398981314.cf0c= 62@skytracker.ca> wrote:=0A =0AMy pppoe connection connects just fine, and = stays connected often=0Afor weeks - then my service provider may have a hic= cup and when my=0Asystem attempts to reconnect, or when I attempt to reconn= ect manually=0AI get an error - here is what appears in my error logs when = attempting =0Ato connect unsuccesssfully - /var/log/messages;=0A=0AApr 26 0= 3:38:57 3s1 kernel: tun0: link state changed to UP=0AApr 26 03:40:38 3s1 ke= rnel: tun0: link state changed to DOWN=0AApr 26 03:40:51 3s1 kernel: tun0: = link state changed to UP=0AApr 26 03:40:54 3s1 ppp[90150]: tun0: Warning: i= face add: ioctl(SIOCAIFADDR, 209.161.205.12 -> 216.154.64.1): File exists= =0AApr 26 03:40:54 3s1 ppp[90150]: tun0: Error: ipcp_InterfaceUp: unable to= set ip address=0A=0AIn my ppp.log I get this;=0A=0Apr 26 16:49:03 3s1 ppp[= 94945]: tun0: Phase: deflink: opening -> dial=0AApr 26 16:49:03 3s1 ppp[949= 45]: tun0: Phase: deflink: dial -> carrier=0AApr 26 16:49:04 3s1 ppp[94945]= : tun0: Phase: Received NGM_PPPOE_ACNAME (hook "bas1-toronto27")=0AApr 26 1= 6:49:04 3s1 ppp[94945]: tun0: Phase: Received NGM_PPPOE_SESSIONID=0AApr 26 = 16:49:04 3s1 ppp[94945]: tun0: Phase: Received NGM_PPPOE_SUCCESS=0AApr 26 1= 6:49:04 3s1 ppp[94945]: tun0: Phase: deflink: carrier -> login=0AApr 26 16:= 49:04 3s1 ppp[94945]: tun0: Phase: deflink: login -> lcp=0AApr 26 16:49:05 = 3s1 ppp[94945]: tun0: Phase: bundle: Authenticate=0AApr 26 16:49:05 3s1 ppp= [94945]: tun0: Phase: deflink: his =3D PAP, mine =3D none=0AApr 26 16:49:05= 3s1 ppp[94945]: tun0: Phase: Pap Output: -obscured--------- ********=0AApr= 26 16:49:07 3s1 ppp[94945]: tun0: Phase: Pap Input: SUCCESS ()=0AApr 26 16= :49:07 3s1 ppp[94945]: tun0: Phase: deflink: lcp -> open=0AApr 26 16:49:07 = 3s1 ppp[94945]: tun0: Phase: bundle: Network=0AApr 26 16:49:07 3s1 ppp[9494= 5]: tun0: Warning: iface add: ioctl(SIOCAIFADDR, 209.161.205.12 -> 216.154.= 64.1): File exists=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Error: ipcp_Inte= rfaceUp: unable to set ip address=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: P= hase: bundle: Terminate=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Phase: defl= ink: open -> lcp=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Phase: deflink: Di= sconnected!=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Phase: deflink: lcp -> = logout=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Phase: deflink: logout -> ha= ngup=0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Phase: deflink: Disconnected!= =0AApr 26 16:49:07 3s1 ppp[94945]: tun0: Phase: deflink: Connect time: 4 se= cs: 119 octets in, 144 octets out=0A=0AMy first thought was to go to the er= ror line which states "File exists" - and =0Ato delete that file - but I ha= ve not idea where that is.=A0 Here is my ppp.conf;=0A=0Adefault: # or name_= of_service_provider=0A=A0 =A0 =A0 set device PPPoE:fxp0 # replace xl1 with = your ethernet device=0A=A0 =A0 =A0 set mru 1492=0A=A0 =A0 =A0 set mtu 1492= =0A=A0 =A0 =A0 set authname ??????????????????=0A=A0 =A0 =A0 set authkey ??= ????=0A=A0 =A0 =A0 set log Phase tun command # you can add more detailed lo= gging if you wish=0A=A0 =A0 =A0 disable ipv6cp=0A=A0 =A0 =A0 set dial=0A=A0= =A0 =A0 set login=0A=A0 =A0 =A0 set ifaddr 10.0.0.1/0 10.0.0.2/0=0A=A0 =A0= =A0 set ifaddr 209.161.205.12 206.221.248.4=0A=A0 =A0 =A0 add default HISA= DDR=0A=A0 =A0 =A0 nat enable yes # if you want to enable nat for your local= net=0A=0Athe line=0A=A0 =A0 =A0 set ifaddr 209.161.205.12 206.221.248.4=0A= states my statis IP address followed by the connection address at my=0Asevi= ce provider I am guess - but my service providers address changes=0Aright n= ow it is 216.154.64.1=0A=0AAny pointers or comments would be useful.=0A____= ___________________________________________=0Afreebsd-questions@freebsd.org= mailing list=0Ahttp://lists.freebsd.org/mailman/listinfo/freebsd-questions= =0ATo unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.= org" From owner-freebsd-questions@FreeBSD.ORG Sun Apr 27 21:38:09 2014 Return-Path: <owner-freebsd-questions@FreeBSD.ORG> Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id A85355BB for <freebsd-questions@freebsd.org>; Sun, 27 Apr 2014 21:38:09 +0000 (UTC) Received: from outgoing.tristatelogic.com (segfault.tristatelogic.com [69.62.255.118]) by mx1.freebsd.org (Postfix) with ESMTP id 8C4AC280 for <freebsd-questions@freebsd.org>; Sun, 27 Apr 2014 21:38:08 +0000 (UTC) Received: from segfault-nmh-helo.tristatelogic.com (localhost [127.0.0.1]) by segfault.tristatelogic.com (Postfix) with ESMTP id 3F1D13AE0E for <freebsd-questions@freebsd.org>; Sun, 27 Apr 2014 14:37:38 -0700 (PDT) From: "Ronald F. Guilmette" <rfg@tristatelogic.com> To: freebsd-questions@freebsd.org Subject: missing man pages Date: Sun, 27 Apr 2014 14:37:38 -0700 Message-ID: <43930.1398634658@server1.tristatelogic.com> X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.17 Precedence: list List-Id: User questions <freebsd-questions.freebsd.org> List-Unsubscribe: <http://lists.freebsd.org/mailman/options/freebsd-questions>, <mailto:freebsd-questions-request@freebsd.org?subject=unsubscribe> List-Archive: <http://lists.freebsd.org/pipermail/freebsd-questions/>; List-Post: <mailto:freebsd-questions@freebsd.org> List-Help: <mailto:freebsd-questions-request@freebsd.org?subject=help> List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-questions>, <mailto:freebsd-questions-request@freebsd.org?subject=subscribe> X-List-Received-Date: Sun, 27 Apr 2014 21:38:09 -0000 I just now noticed a few processes running (via ps -ax) that don't appear to have associated man pages: gconfd-2 polkitd console-kit-daemon hald-addon-mouse-sysmouse: hald-runner Does anyone other than me think that this is something that should be rectified? Note that there does appear to exist a man page elsewhere for at least one of the above: http://www.freedesktop.org/software/polkit/docs/latest/polkitd.8.html I have no idea why that didn't get installed on my FreeBSD (9.1) system. Should I file PRs on these things?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1398626008.33439.YahooMailNeo>