Date: Tue, 05 Dec 2000 17:33:59 +0200 From: "=?ISO-8859-5?B?stDb1eD22SC77+U=?=" <Lyakh@ukrsotsbank.com> To: <freebsd-questions@FreeBSD.ORG> Subject: Mylex DAC960P firmware 3.52-0-02, 16MB RAM Message-ID: <sa2d2715.020@Sun>
next in thread | raw e-mail | index | archive | help
have a server with the following configuration:
Mylex DAC960P firmware 3.52-0-02, 16MB RAM
in P65UP5-P6ND Mainboard
#dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.2-RELEASE #0: Tue Dec 5 15:26:34 EET 2000
root@news.ukrsotsbank.com:/usr/src/sys/compile/News_Krnl
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (265.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping = 3
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (131072K bytes)
config> di sn0
config> di lnc0
config> di fe0
config> di ed0
config> di cs0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 126656512 (123688K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03d7000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d709c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 1.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
mlx0: <Mylex version 3 RAID interface> port 0xe000-0xe07f mem
0xe5000000-0xe500007f irq 19 at device 9.0 on pci0
mlx0: DAC960P/PD, 1 channel, firmware 3.52-0-02, 16MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 13020MB (26664960 sectors) RAID 5 (online)
pci0: <Cirrus Logic GD5446 SVGA controller> at 10.0
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd800-0xd83f irq 17 at
device 11.0 on pci0
xl0: Ethernet address: 00:60:08:66:7c:19
miibus0: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 6187MB <FUJITSU MPE3064AT> [13410/15/63] at ata0-master WDMA2
acd0: CDROM <CREATIVECD2421E> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
When I`m trying to write something in RAID area I get next message:
mlx0: I/O error - attempt to write beyond end of drive
bus_dmamap_load: Too many segs! buf_len = 0x6000
bus_dmamap_load: Too many segs! buf_len = 0x6000
mlx0: I/O error - attempt to write beyond end of drive
mlx0: I/O error - attempt to write beyond end of drive
bus_dmamap_load: Too many segs! buf_len = 0x10000
mlx0: I/O error - attempt to write beyond end of drive
bus_dmamap_load: Too many segs! buf_len = 0x10000
bus_dmamap_load: Too many segs! buf_len = 0x6000
.....
What could you advice me in that situation?
Thank you for cooperation in advance.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?sa2d2715.020>