Date: Mon, 28 Apr 2014 07:46:20 +0200 From: Datasmurf <datasmurf@mail.ru> To: freebsd-questions@freebsd.org Subject: Re: FreeBSD 10 USB3/Vantec NexStar HX4R Message-ID: <20140428074620.94654f4705d1006f0acc0f93@mail.ru> In-Reply-To: <16437454.1284.1398642350202.JavaMail.root@rlhc.net> References: <21596206.1255.1398641756445.JavaMail.root@rlhc.net> <16437454.1284.1398642350202.JavaMail.root@rlhc.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 27 Apr 2014 18:45:50 -0500 (CDT), "Richard L. Houston" <rhouston@rlhc.net> wrote: >Hi all. First time poster and noob to FreeBSD.=20 >Apologies if this have been asked and answered.=20 > >I have a FreeBSD 10 box setup and I plan on using it as a backup storage s= erver. As this will not be a high IO system, just for storing backups, I wo= uld like to use a USB3 attached Vantec NexStar Hx4R 4 disk enclosure and us= e ZFS to zraid the disks. I am using ZFS on several Linux server as it stan= ds and quite comfortable with that side of things.=20 > >The issue I am running into is the following error when I bring the enclos= ure on line (From dmesg):=20 >ugen0.2: <vendor 0x152d> at usbus0=20 >umass0: <vendor 0x152d product 0x0551, class 0/0, rev 3.00/1.00, addr 1> o= n usbus0=20 >umass0: SCSI over Bulk-Only; quirks =3D 0x0000=20 >umass0: Get Max Lun not supported (USB_ERR_TIMEOUT)=20 >umass0:3:0:-1: Attached to scbus3=20 >(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00=20 >(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error= =20 >(probe0:umass-sim0:0:0:0): Retrying command=20 >(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00=20 >(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error= =20 >(probe0:umass-sim0:0:0:0): Retrying command=20 >(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00=20 >(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error= =20 >(probe0:umass-sim0:0:0:0): Retrying command=20 >(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00=20 >(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error= =20 >(probe0:umass-sim0:0:0:0): Retrying command=20 >(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00=20 >(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error= =20 >(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted=20 > >I have applied all patches up to date. I searched around on the issue but = could not find any resolution for the issue.=20 > >Any help getting this unit to work would be much appreciated. The 4 disks = already have a working ZFS pool created on another system. I have attached = the unit to a second Linux, sorry to be using fowl language here ;), system= with ZFS and the unit and ZFS work just fine.=20 > >Thanks in advance!=20 > >Rich=20 Hi, i had the same issue with a 2 Port USB 3.0 ExpressCard with=20 Renesas/NEC -=B5PD720200 Chipset. On Lenovo T61p. All worked fine until I upgraded to 10.0.=20 I had to unplug the HDD several times before da0 would appear. Because i did not find a way to fix this issue, i downgraded back to 9.2. greetings dan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140428074620.94654f4705d1006f0acc0f93>