Date: Fri, 09 Aug 2002 18:33:54 +0200 From: Marcin Gryszkalis <mgryszkalis@cerint.pl> To: freebsd-alpha <freebsd-alpha@FreeBSD.ORG> Cc: freebsd-scsi@FreeBSD.ORG Subject: Re: da driver problem? Message-ID: <3D53EEF2.2090602@cerint.pl> References: <3D5280F4.8030706@cerint.pl> <20020808152922.A18763@panzer.kdm.org> <3D53BD58.1060600@cerint.pl> <20020809130749.GJ52932@cicely5.cicely.de> <3D53C01A.1050702@cerint.pl> <20020809151159.GV52932@cicely5.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> Do you have bootlogs in /var/log/messages* from the old OS version? I forgot about 'daily' reports :) here's old one: ldah.math.uni.lodz.pl kernel log messages: > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.2-BETA #8: Sat Nov 4 23:03:11 CET 2000 > root@ldah.math.uni.lodz.pl:/usr/src/sys/compile/ldah > AlphaStation 500 or 600 (KN20AA) > Digital AlphaStation 500/333, 333MHz > 8192 byte page size, 1 processor. > CPU: EV5 (21164) major=5 minor=0 > OSF PAL rev: 0x1000000020115 > real memory = 64856064 (63336K bytes) > avail memory = 57171968 (55832K bytes) > Preloaded elf kernel "kernel" at 0xfffffc0000672000. > md0: Malloc disk > cia0: ALCOR/ALCOR2, pass 2 > pcib0: <2117x PCI host bus adapter> on cia0 > pci0: <PCI bus> on pcib0 > de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x82019000-0x8201907f irq 13 at device 6.0 on pci0 > de0: interrupting at CIA irq 13 > de0: DEC 21040 [10Mb/s] pass 2.4 > de0: address 00:00:f8:24:19:eb > pci0: <VGA-compatible display device> at 8.0 irq 16 > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82018000-0x82018fff irq 12 at device 9.0 on pci0 > isp0: interrupting at CIA irq 12 > isp0: invalid NVRAM header > isab0: <Intel 82375EB PCI-EISA bridge> at device 10.0 on pci0 > isa0: <ISA bus> on isab0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: interrupting at ISA irq 6 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd0: interrupting at ISA irq 1 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: interrupting at ISA irq 12 > psm0: model Generic PS/2 mouse, device ID 0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> on isa0 > sc0: VGA <16 virtual consoles, flags=0x200> > mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0 > sio0 at port 0x3f8-0x3ff irq 4 on isa0 > sio0: type 16550A > sio0: interrupting at ISA irq 4 > sio1: reserved for low-level i/o > ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppi0: <Parallel I/O> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Polled port > ppc0: interrupting at ISA irq 7 > Timecounter "alpha" frequency 333332018 Hz > IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry > IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default > IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled > Waiting 15 seconds for SCSI devices to settle > de0: enabling 10baseT port > isp0: 0.0 get user period 0x19 offset 0xc flags 0xfd00 > isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc500 > isp0: 0.0 set current period 0x19 offset 0xc flags 0xfd00 > isp0: 0.6 get user period 0x19 offset 0xc flags 0xfd00 > isp0: 0.6 get current period 0x19 offset 0x0 flags 0xc500 > isp0: 0.6 set current period 0x19 offset 0xc flags 0xdd00 > Mounting root from ufs:/dev/da0a > da1 at isp0 bus 0 target 6 lun 0 > da1: <QUANTUM XP34550S LXQ1> Fixed Direct Access SCSI-2 device > isp0: 0.6 get current period 0x19 offset 0xc flags 0xdd00 > da1: 10.000MB/s transfers (10.000MHz, offset 12), Tagged Queueing Enabled > da1: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) > da0 at isp0 bus 0 target 0 lun 0 > da0: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device > isp0: 0.0 get current period 0x19 offset 0xc flags 0xfd00 > da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled > da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) -- Marcin Gryszkalis <mg@cerint.pl> or <dagoon@math.uni.lodz.pl> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D53EEF2.2090602>