Date: Sat, 22 Nov 2008 15:46:05 +0200 From: Kostik Belousov <kostikbel@gmail.com> To: Oleg Kozheltsev <axel@dnepr.net> Cc: freebsd-stable@freebsd.org Subject: Re: can't write dvd (interrupt storm) Message-ID: <20081122134605.GG6408@deviant.kiev.zoral.com.ua> In-Reply-To: <491D28BD.4050309@dnepr.net> References: <491D28BD.4050309@dnepr.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--9Iq5ULCa7nGtWwZS Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Nov 14, 2008 at 09:29:01AM +0200, Oleg Kozheltsev wrote: > Hello, >=20 > yesterday I buy new motherboard INTEL DP43TF and now I can't write dvd=20 > disks in any format (on PATA dvd-drive). but still can read any dvd and= =20 > cd. cd write and blank procedure for dvd-rw done well too. when I start= =20 > write dvd by growisofs (/dev/cd0 - atapicam), in log I get: >=20 > Nov 14 08:28:06 <kern.crit> gx kernel: acd0: FAILURE - RESERVE_TRACK=20 > ILLEGAL REQUEST asc=3D0x30 ascq=3D0x05 > Nov 14 08:28:06 <kern.crit> gx kernel: interrupt storm detected on=20 > "irq4:"; throttling interrupt source > Nov 14 08:28:50 <kern.crit> gx last message repeated <many> times > Nov 14 08:31:07 <kern.crit> gx kernel: acd0: FAILURE - WRITE_BIG timed out >=20 > if I use burncd (/dev/acd0. with, or without atapicam in kernel), then I= =20 > get only second string in log. Does cdrecord works for you when writing CD-ROM or CD-RW ? I got the same motherboard, and so far I had no problems with cd. pooma% camcontrol devlist <SONY DVD-ROM DDU1612 DYS3> at scbus0 target 0 lun 0 (pass0,sg0,cd0) <Optiarc DVD RW AD-7170A 1.02> at scbus0 target 1 lun 0 (pass1,sg1,cd1) I have no blank dvd at the hands now to verify growisofs operations. >=20 > before upgrade, I had 6.3-RELEASE-p3, update to 7.0-RELEASE-p5, and=20 > after to 7.1-PRELEASE #5, it doesn't change anything. drive=20 > configuration in BIOS - too (change only SATA controller ICH10/AHCI).=20 > this IRQ is also used by USB and COM. turning off both in BIOS and/or=20 > kernel change IRQ map, but drive still not work correctly. present or=20 > not ACPI module - doesn't matter too. by the way, COM port I also can't= =20 > reach (/dev/cuad0), but without interrupt storm in log's (through APCI=20 What do you mean by "cannot reach" ? > or ISA. even if USB and atapicd is turned off). >=20 > someone had the same problem?... thanks for attention :) >=20 >=20 > system info: >=20 > FreeBSD gx.dnepr.net 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #3: Thu Nov=20 > 13 16:23:09 EET 2008 root@gx.dnepr.net:/usr/obj/usr/src/sys/KERN i386 >=20 > pcib3: <ACPI PCI-PCI bridge> irq 4 at device 28.3 on pci0 > pci3: <ACPI PCI bus> on pcib3 >=20 > atapci0: <JMicron JMB368 UDMA133 controller> port=20 > 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f=20 > irq 4 at device 0.0 on pci3 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] >=20 > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 4 at=20 > device 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] >=20 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on= =20 > acpi0 > sio0: type 16550A >=20 > acd0: DVDR <NEC DVD RW ND-3550A/1.05> at ata2-<master or slave> UDMA33 > cd0 at ata2 bus 0 target 1 lun 0 > cd0: <_NEC DVD_RW ND-3550A 1.05> Removable CD-ROM SCSI-0 device > cd0: 33.000MB/s transfers > cd0: Attempt to query device size failed: NOT READY, Medium not present >=20 > (if media present in boot time - interrupt storm again) > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" --9Iq5ULCa7nGtWwZS Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (FreeBSD) iEYEARECAAYFAkkoDRwACgkQC3+MBN1Mb4hlQwCcDEEKAfns05FT23hMuQdQ2Pi/ wZ0AoJ+KUito7XRS/iPrYPPJd3iatFkh =td9T -----END PGP SIGNATURE----- --9Iq5ULCa7nGtWwZS--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081122134605.GG6408>