Date: Sat, 05 Jan 2008 23:22:57 +0100 From: Philipp Ost <pj@smo.de> To: Milan Bartos <merlyn500@gmail.com> Cc: freebsd-current@freebsd.org Subject: Re: Ati driver xorg 1.4, works badly Message-ID: <47800341.4020905@smo.de> In-Reply-To: <200801051930.26049.merlyn500@gmail.com> References: <200801041816.09716.merlyn500@gmail.com> <200801051044.58548.merlyn500@gmail.com> <477FA875.2090803@smo.de> <200801051930.26049.merlyn500@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Milan, hi list, Milan Bartos wrote: > Thanks a lot for you xorg.conf. FPS with glxgears is now about 1500 (before it > was about 500). But still, in glxgears window (supertux2 too) is black, only > black. I have loaded > 9 3 0xc0ebc000 10ebc drm.ko (/boot/kernel/drm.ko) and > 10 1 0xc0ecd000 22cb4 radeon.ko (/boot/kernel/radeon.ko). I have loaded those modules, too. However, I see the gears spinning in glxgears (ca. 920 FPS, but that's more or less unimportant :-P). Don't know about supertux2 as I don't have it installed. > Direct rendering Yes. > [Vallhala]~>glxinfo |grep direct > libGL warning: 3D driver claims to not support visual 0x55 > direct rendering: Yes > [Vallhala]~> > > And here is something strange: > libGL warning: 3D driver claims to not support visual 0x55 > And i don't know what is it. Same here: $ glxinfo | grep rendering libGL warning: 3D driver claims to not support visual 0x64 direct rendering: Yes $ I did a quick search and I got a lot of results related to Compiz and AIGLX -- I'm even more confused now as I have neither of them installed... Can somebody with more wisdom shed some light on this please? I'm using a Radeon 9250 if that matters (from pciconf): vgapci0@pci0:1:0:0: class=0x030000 card=0x1013196d chip=0x59601002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RV280 Radeon 9200 Pro' class = display subclass = VGA vgapci1@pci0:1:0:1: class=0x038000 card=0x1012196d chip=0x59401002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RV280 Radeon 9200 Pro - Secondary' class = display Regards, Philipp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47800341.4020905>