Date: Thu, 27 Jun 1996 20:10:28 -0700 From: Justin Ashworth <ashworth@cs.montana.edu> To: questions@freebsd.org Subject: Kernel won't make Message-ID: <2.2.32.19960628031028.006d9e18@cs.montana.edu>
next in thread | raw e-mail | index | archive | help
--=====================_835956628==_ Content-Type: text/plain; charset="us-ascii" I'm compiling a custom kernel per the documentation (section 5.2 in the FreeBSD Handbook). I did the config and make depend, which both worked. However, I got numerous warnings when trying to make, then it finally stopped with an error code of 1. Here is my kernel listing (if the wrap screws it up, look at the attached copy): ----------------------------- machine "i386" cpu "I586_CPU" ident SPACEHOG maxusers 10 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options SYSVSHM options "SBC_IRQ=9" options "SB16_DMA=3" config SPACEHOG root on wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is sufficient # for any number of installed devices. controller ahc0 controller scbus0 #device sd0 device od0 #device st0 #device cd0 #Only need one of these, the code dynamically grows #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # PCCARD (PCMCIA) support #controller crd0 #device pcic0 at crd? #device pcic1 at crd? device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr device fxp0 device vx0 pseudo-device loop pseudo-device log #pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 # keep this if you want to be able to continue to use /stand/sysinstall pseudo-device gzip # Exec gzipped a.out's # sound card stuff controller snd0 device sb0 at isa? port 0x220 irq 9 device sbxvi0 at isa? drq 3 ------------------------------------- Please help.... Thanks! --=====================_835956628==_ Content-Type: text/plain; charset="us-ascii" Content-Disposition: attachment; filename="SPACEHOG" machine "i386" cpu "I586_CPU" ident SPACEHOG maxusers 10 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options SYSVSHM options "SBC_IRQ=9" options "SB16_DMA=3" config SPACEHOG root on wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is sufficient # for any number of installed devices. controller ahc0 controller scbus0 #device sd0 device od0 #device st0 #device cd0 #Only need one of these, the code dynamically grows #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # PCCARD (PCMCIA) support #controller crd0 #device pcic0 at crd? #device pcic1 at crd? device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr device fxp0 device vx0 pseudo-device loop pseudo-device log #pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 # keep this if you want to be able to continue to use /stand/sysinstall pseudo-device gzip # Exec gzipped a.out's # sound card stuff controller snd0 device sb0 at isa? port 0x220 irq 9 device sbxvi0 at isa? drq 3 --=====================_835956628==_ Content-Type: text/plain; charset="us-ascii" - Justin J. Ashworth -- CS Student, Montana State University --- Chair, Association for Computing Machinery - MSU -- ashworth@cs.montana.edu - http://www.cs.montana.edu/~ashworth --=====================_835956628==_--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19960628031028.006d9e18>