Date: Thu, 03 Aug 2000 12:00:33 +0900 From: Insung Cho <ischo@mpd.ams.eng.osaka-u.ac.jp> To: freebsd-multimedia@freebsd.org Subject: Problem with SB Live! in my 4.1S Message-ID: <3988E051.4CE0E9B0@mpd.ams.eng.osaka-u.ac.jp>
next in thread | raw e-mail | index | archive | help
Hello,
Yesterday I upgraded from 4.0R to 4.1S. (I cvsup'd 4.1S and make world
and kernel compile.)
I had a SB Live! and I have used well with a small patch for 4.0R,
however, after upgrading system hung up
(even mouse cursor would not move) and reboot automatically, as soon as
I start playing my mp3 files.
I checked "cat /dev/sndstat" and I think it works well.
Is anyone who have same problem with me? Thanks.
Insung Cho
P.S. my dmesg is :
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.1-STABLE #0: Thu Aug 3 10:03:28 JST 2000
ischo@cen-wcho.mpd.ams.eng.osaka-u.ac.jp:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (598.63-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 268435456 (262144K bytes)
avail memory = 256712704 (250696K bytes)
Preloaded elf kernel "kernel" at 0xc0447000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc044709c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x10c0-0x10cf at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1080-0x109f irq
9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at
device 7.3 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x1000-0x107f mem
0xf4000000-0xf400007f irq 11 at device 13.0 on pci0
xl0: Ethernet address: 00:50:da:68:bb:34
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0x10a0-0x10bf irq 10 at device 14.0 on
pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
pc0: <Parallel port> at port 0x378-0x37f irq 7 drq 0 on isa0
pc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 19473MB <Maxtor 92049U6> [39566/16/63] at ata0-master using UDMA33
ad1: 12323MB <SAMSUNG SV1296A> [25038/16/63] at ata0-slave using UDMA33
acd0: CDROM <CRD-8480C> at ata1-master using PIO4
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3988E051.4CE0E9B0>