Date: Thu, 21 Oct 2010 11:02:30 -0400 From: Mike Tancsa <mike@sentex.net> To: freebsd-usb@freebsd.org Subject: USB_ERR_TIMEOUT and USB_ERR_STALLED Message-ID: <201010211502.o9LF2WYf086752@lava.sentex.ca>
next in thread | raw e-mail | index | archive | help
I am trying to use RELENG_8 to monitor a number of APC upses and it seems when there are more than one, I start to see a lot of USB errors with the devices "coming and going" In the logs, I see a lot of # grep USB /var/log/all.log | tail Oct 21 10:24:05 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:25:47 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:27:45 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:29:44 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:30:35 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub5 Oct 21 10:32:35 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:37:04 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:38:38 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub4 Oct 21 10:44:14 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub5 Oct 21 10:45:09 upsmon1 root: Unknown USB device: vendor 0x051d product 0x0002 bus uhub5 # usbconfig ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen3.2: <product 0xf103 vendor 0x2001> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen0.2: <Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 American Power Conversion> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.3: <Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.4: <Back-UPS RS 1500 FW:8.g9a.D USB FW:g9a American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.5: <Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.6: <Back-UPS RS 1500 FW:8.g9a.D USB FW:g9a American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.7: <Back-UPS RS 1500 FW:8.g4 .D USB FW:g4 American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.8: <USB2.0 Hub vendor 0x05e3> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen3.9: <Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.10: <Back-UPS RS 1500 FW:8.g7 .D USB FW:g7 American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON ugen3.11: <Back-UPS RS 1500 FW:8.g8 .D USB FW:g8 American Power Conversion> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON This is with a kernel from Oct 4th, i386. Any idea what might be up or how to debug this ?? Setting hw.usb.debug to anything > 0 causes the system to almost hang under the load unfortunately. ---Mike -------------------------------------------------------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet since 1994 www.sentex.net Cambridge, Ontario Canada www.sentex.net/mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201010211502.o9LF2WYf086752>