Date: Sun, 21 Feb 1999 06:11:26 -0500 From: Benjamin Lewis <bhlewis@gte.net> To: Doug Rabson <dfr@nlsystems.com> Cc: Michael Reifenberger <root@nihil.plaut.de>, freebsd-current@FreeBSD.ORG, se@FreeBSD.ORG Subject: Re: Compaq built-in ncr & tl controllers with 4.0 Message-ID: <199902211111.GAA64516@home.bhl> In-Reply-To: Your message of "Thu, 18 Feb 1999 22:38:02 GMT." <Pine.BSF.4.05.9902182236270.61913-100000@herring.nlsystems.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Mr. Rabson-
Sorry it's been so long for me to get back to you about the patch you sent.
The machine is located accross country & 3 time zones away, so coordinating
with the people at the console has been tedious.
In any case, the patch worked brilliantly. The machine is now running a 4.0
generic kernel and is in the process of building and installing the SMP kernel.
I would suggest that the patches make their way into the 4.0 and 3.1 source
trees, although I have yet to test them on a machine that was not affected by
the PCI bus probe problem. I'll incorporate the patch into a more
conventional 4.0 machine later today and let you know the results.
We want to thank you so much for your quick response. The owners of the
machine are quite gratified that they will be able to take advantage of the
second processor after all.
The dmesg from the machine appears below, in case you find it interesting.
-Ben
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Sat Feb 20 16:51:12 PST 1999
bhlewis@server.mediumlook.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II (299.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping=3
Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V,MMX>
real memory = 16777216 (16384K bytes)
avail memory = 13316096 (13004K bytes)
Preloaded elf kernel "kernel" at 0xf0342000.
Probing for devices on PCI bus 0:
chip0: <Ross (?) host to PCI bridge> rev 0x01 on pci0.0.0
vga0: <S3 Trio graphics accelerator> rev 0x43 int a irq 11 on pci0.13.0
chip1: <PCI to ISA bridge (vendor=0e11 device=a0f3)> rev 0x0c on pci0.15.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x0a int a irq 15 on pci0
.15.1
chip2: <Ross (?) host to PCI bridge> rev 0x01 on pci0.17.0
Probing for devices on PCI bus 1:
tl0: <Compaq Netelligent 10/100 Proliant> rev 0x10 int a irq 11 on pci1.7.0
tl0: Ethernet address: 00:80:5f:85:97:2e
tl0: autoneg complete, link status good (half-duplex, 10Mbps)
ncr0: <ncr 53c875 fast20 wide scsi> rev 0x04 int a irq 11 on pci1.9.0
adv0: <AdvanSys ASC3150 Ultra SCSI controller> rev 0x02 int a irq 11 on pci1.10.
0
adv0: AdvanSys Ultra SCSI Host Adapter, SCSI ID 0, queue depth 16
Probing for devices on PCI bus 2:
Probing for PnP devices:
CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff Comp ID: @@@0000 [0x0000
0000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (atapi): <CD-ROM CDU571-Q/1.1a>, removable, accel, dma, iordis
acd0: drive speed 1378KB/sec, 128KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wdc1 not found at 0x170
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at adv0 bus 0 target 4 lun 0
da1: <iomega jaz 1GB J.83> Removable Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15)
da1: Attempt to query device size failed: NOT READY, Medium not present
da0 at ncr0 bus 0 target 0 lun 0
da0: <COMPAQ WDE4360W 1.52> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C)
--
Benjamin Lewis
bhlewis@gte.net -or- bhlewis@purdue.edu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902211111.GAA64516>