Date: Mon, 17 Jul 2000 12:55:57 +1000 (EST) From: carl@bl.echidna.id.au To: freebsd-stable@FreeBSD.ORG Subject: buildworld problems (4.0-RELEASE to 4.0-STABLE) Message-ID: <200007170255.e6H2tvH28081@rollcage.bl.echidna.id.au>
next in thread | raw e-mail | index | archive | help
G'day,
I've got a copy of 4.0 RELEASE (from the CD) that I've been trying
unsuccessfully to update to 4.0-STABLE for the last few weeks. I've
been watching this list, and taking note of what I've seen, and
my procedure is this :
I CVSup the latest source from cvsup3.au.FreeBSD.org (I'm in Australia),
which seems to run ok, and then I cd /usr/src
and make buildworld.
I'm yet to get it to build.
The box either reboots part-way through, or I see something like this :
cc -O -pipe -DFREEBSD_NATIVE -DIN_GCC -DHAVE_CONFIG_H -DPREFIX=\"/usr/obj/usr/src/i386/usr\" -I/usr/obj/usr/src/i386/usr/src/gnu/usr.bin/cc/cc1plus/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc1plus/../cc_tools -I/usr/src/gnu/usr.bin/cc/cc1plus/../../../../contrib/gcc -I/usr/src/gnu/usr.bin/cc/cc1plus/../../../../contrib/gcc/config -I/usr/src/gnu/usr.bin/cc/cc1plus/../../../../contrib/gcc/cp -I. -I/usr/obj/usr/src/i386/usr/include -c /usr/src/gnu/usr.bin/cc/cc1plus/../../../../contrib/gcc/cp/pt.c
{standard input}: Assembler messages:
{standard input}:3968: Warning: end of file not at end of a line; newline inserted
{standard input}:6037: Error: no such 386 instruction: `a'
{standard input}:6038: Error: no such 386 instruction: `ddl'
*** Error code 1
Stop in /usr/src/gnu/usr.bin/cc/cc1plus.
*** Error code 1
Stop in /usr/src/gnu/usr.bin/cc.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
clunker#
To make sure there's no bogosity floating around I've done a make clean
in /usr/src, but the same error happens. The error moves around (each time I
compile it it's different), so do I have bodgey hardware that could
cause this, or am I doing something really wrong?
The box is :
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon Jul 10 21:43:47 EST 2000
carl@clunker.bl.echidna.id.au:/usr/src/sys/compile/clunker2
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (199.31-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
avail memory = 61452288 (60012K bytes)
Preloaded elf kernel "kernel" at 0xc037a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Tseng Labs ET6000/ET6100 graphics accelerator> at 10.0 irq 11
xl0: <3Com 3c900-TPO Etherlink XL> port 0x6100-0x613f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:60:08:34:49:29
xl0: selecting 10baseT transceiver, half duplex
xl0: supplying EUI64: 00:60:08:ff:fe:34:49:29
isa0: unexpected tag 14
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.16> on sbc0
unknown0: <Game> at port 0x200-0x207 on isa0
unknown1: <WaveTable> at port 0x620-0x623 on isa0
ad0: 3077MB <ST33221A> [6253/16/63] at ata0-master using WDMA2
acd0: CDROM <CD-ROM CDU511> at ata1-master using PIO3
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
xl0: starting DAD for fe80:0001::0260:08ff:fe34:4929
xl0: DAD complete for fe80:0001::0260:08ff:fe34:4929 - no duplicates found
xl0: starting DAD for 3ffe:8001:0005:0ed0:0260:08ff:fe34:4929
xl0: DAD complete for 3ffe:8001:0005:0ed0:0260:08ff:fe34:4929 - no duplicates found
and my cvsup config file :
*default host=cvsup3.au.FreeBSD.org
*default base=/usr
*default prefix=/usr
*default release=cvs tag=RELENG_4
*default delete use-rel-suffix
*default compress
src-all
Can anyone tell me what I'm doing wrong?
thanks for your time, and an excellent product.
Carl
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200007170255.e6H2tvH28081>